FreeCalypso > hg > freecalypso-sw
view rvinterf/lowlevel/Makefile @ 884:353daaa6014d
gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config
The code we got from TCS211 had the maximum prim pool partition size set to
900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes
in every other config. As it turns out, this "minimized" config breaks when
the AT command interface is used with %CPI enabled, as the responsible code in
ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be
unsupported usage (perhaps they didn't care about the combination of a
voice-only PS with AT command control), but we do want this use case to work
without crashing. Solution: I made the largest prim pool the same as it is
with FAX_AND_DATA: 3 partitions of 1600 bytes.
author | Space Falcon <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 27 Jun 2015 07:31:30 +0000 |
parents | 144b5d222de8 |
children | ed5dcc53e0b3 |
line wrap: on
line source
CC= gcc CFLAGS= -O2 PROGS= rvtdump rvinterf tfc139 INSTBIN=/usr/local/bin LIBG23= ../libg23/libg23.a RVTDUMP_OBJS= format.o openport.o output.o packetrx.o rvtdump.o RVINTERF_OBJS= clientcmd.o format.o localsock.o logsent.o openport.o output.o \ packetrx.o packettx.o pktfwd.o rvifmain.o TFC139_OBJS= format.o openport.o output.o packetrx.o packettx.o tfc139.o all: ${PROGS} rvtdump: ${RVTDUMP_OBJS} ${LIBG23} ${CC} ${CFLAGS} -o $@ ${RVTDUMP_OBJS} ${LIBG23} rvinterf: ${RVINTERF_OBJS} ${LIBG23} ${CC} ${CFLAGS} -o $@ ${RVINTERF_OBJS} ${LIBG23} tfc139: ${TFC139_OBJS} ${LIBG23} ${CC} ${CFLAGS} -o $@ ${TFC139_OBJS} ${LIBG23} install: ${PROGS} mkdir -p ${INSTBIN} install -c ${PROGS} ${INSTBIN} clean: rm -f *.o *.out *errs ${PROGS}