FreeCalypso > hg > freecalypso-sw
view rvinterf/tmsh/abb.c @ 884:353daaa6014d
gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config
The code we got from TCS211 had the maximum prim pool partition size set to
900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes
in every other config. As it turns out, this "minimized" config breaks when
the AT command interface is used with %CPI enabled, as the responsible code in
ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be
unsupported usage (perhaps they didn't care about the combination of a
voice-only PS with AT command control), but we do want this use case to work
without crashing. Solution: I made the largest prim pool the same as it is
with FAX_AND_DATA: 3 partitions of 1600 bytes.
author | Space Falcon <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 27 Jun 2015 07:31:30 +0000 |
parents | c146f38d2b5f |
children |
line wrap: on
line source
/* * In this module we are going to implement commands dealing with the ABB. */ #include <sys/types.h> #include <stdio.h> #include <string.h> #include <strings.h> #include <stdlib.h> #include "pktmux.h" #include "limits.h" #include "localtypes.h" #include "etm.h" extern u_char rvi_msg[]; extern int rvi_msg_len; void cmd_abbr(argc, argv) char **argv; { u32 page, reg; u_char cmdpkt[5]; page = strtoul(argv[1], 0, 0); reg = strtoul(argv[2], 0, 0); if (page > 1 || reg > 31) { printf("error: argument(s) out of range\n"); return; } cmdpkt[1] = ETM_CORE; cmdpkt[2] = TMCORE_OPC_CODEC_RD; cmdpkt[3] = page << 5 | reg; send_etm_cmd(cmdpkt, 3); } void abbr_response() { unsigned pg, reg, val; char buf[80]; if (rvi_msg[3]) { print_etm_pkt_raw("abbr error"); return; } if (rvi_msg_len != 9) { print_etm_pkt_raw("abbr malformed resp"); return; } pg = rvi_msg[5] >> 5; reg = rvi_msg[5] & 0x1F; val = rvi_msg[6] | rvi_msg[7] << 8; sprintf(buf, "abbr %u %u: %03X", pg, reg, val); async_msg_output(buf); } void cmd_abbw(argc, argv) char **argv; { u32 page, reg, val; u_char cmdpkt[7]; page = strtoul(argv[1], 0, 0); reg = strtoul(argv[2], 0, 0); val = strtoul(argv[3], 0, 16); if (page > 1 || reg > 31 || val > 0x3FF) { printf("error: argument(s) out of range\n"); return; } cmdpkt[1] = ETM_CORE; cmdpkt[2] = TMCORE_OPC_CODEC_WR; cmdpkt[3] = page << 5 | reg; cmdpkt[4] = val; cmdpkt[5] = val >> 8; send_etm_cmd(cmdpkt, 5); } void abbw_response() { unsigned pg, reg; char buf[80]; if (rvi_msg[3]) { print_etm_pkt_raw("abbw error"); return; } if (rvi_msg_len != 7) { print_etm_pkt_raw("abbw malformed resp"); return; } pg = rvi_msg[5] >> 5; reg = rvi_msg[5] & 0x1F; sprintf(buf, "abbw %u %u OK", pg, reg); async_msg_output(buf); }