gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

CC=	arm-elf-gcc
OBJCOPY=arm-elf-objcopy

TARGETS=compalstage-plain.bin compalstage-thumb.bin compalstage-1003.bin
INSTDIR=/usr/local/share/freecalypso

all:	${TARGETS}

.SUFFIXES: .o .bin

.o.bin:
	${OBJCOPY} -O binary $< $@

compalstage-1003.o:	compalstage.S
	${CC} -DPAD_TO_1003 -c -o $@ $<

compalstage-plain.o:	compalstage.S
	${CC} -c -o $@ $<

compalstage-thumb.o:	compalstage.S
	${CC} -DTHUMB_ENTRY -c -o $@ $<

install:
	mkdir -p ${INSTDIR}
	install -c ${TARGETS} ${INSTDIR}

clean:
	rm -f *.o *errs *core *.bin

FRC: