gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

	.text
	.org	0

#if THUMB_ENTRY
	.code	16
	bx	pc
	nop
#endif
	.code	32

/* delay loop like OsmocomBB does */
	mov	r1, #0xa0000
1:	subs	r1, r1, #1
	bne	1b
/* enable the Calypso boot ROM */
	ldr	r1, reg_addr
	mov	r2, #0x0100
	strh	r2, [r1]
/* jump to it! */
	mov	pc, #0
reg_addr:
	.word	0xFFFFFB10

#if PAD_TO_1003
	.org	0x3be0
	.ascii	"1003"
#endif