gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

#include "halt.h"

	.text
	.code	32
	.global	_entry
_entry:
	ldr	sp, =stack_bottom
@ zero bss
	ldr	r0, =__bss_start
	ldr	r2, =__bss_end
	sub	r1, r2, r0
	bl	bzero
@ C code entry
	bl	main
	mov	r0, #HALTCODE_MAINEXITED
	.global	_exit
_exit:	nop
1:	nop
	b	1b