gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

/*
 * In some error cases in our loadagent code we have no better course
 * of action available than to halt in a tight loop.  We define _exit()
 * to do the latter.  We have defined some codes for the argument value
 * that goes into R0; if you manage to hook up JTAG and get it to work,
 * you might be able to see what went wrong.
 */

#define	HALTCODE_MAINEXITED	0x40
#define	HALTCODE_INVALIDUART	0x41