FreeCalypso > hg > freecalypso-sw
view target-utils/libcommon/serio.S @ 884:353daaa6014d
gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config
The code we got from TCS211 had the maximum prim pool partition size set to
900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes
in every other config. As it turns out, this "minimized" config breaks when
the AT command interface is used with %CPI enabled, as the responsible code in
ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be
unsupported usage (perhaps they didn't care about the combination of a
voice-only PS with AT command control), but we do want this use case to work
without crashing. Solution: I made the largest prim pool the same as it is
with FAX_AND_DATA: 3 partitions of 1600 bytes.
author | Space Falcon <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 27 Jun 2015 07:31:30 +0000 |
parents | d7591faa1258 |
children |
line wrap: on
line source
#include "ns16550.h" @ this module implements the elementary serial I/O operations .text .code 32 .global serial_out serial_out: ldr r1, =uart_base ldr r2, [r1] 1: ldrb r3, [r2, #NS16550_LSR] tst r3, #NS16550_LSR_THRE beq 1b strb r0, [r2, #NS16550_THR] bx lr .global serial_in_poll serial_in_poll: ldr r1, =uart_base ldr r2, [r1] ldrb r3, [r2, #NS16550_LSR] tst r3, #NS16550_LSR_DR ldrneb r0, [r2, #NS16550_RBR] mvneq r0, #0 bx lr .global serial_flush serial_flush: ldr r1, =uart_base ldr r2, [r1] 1: ldrb r3, [r2, #NS16550_LSR] tst r3, #NS16550_LSR_TEMP beq 1b bx lr