FreeCalypso > hg > freecalypso-sw
view target-utils/loadagent/Makefile @ 884:353daaa6014d
gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config
The code we got from TCS211 had the maximum prim pool partition size set to
900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes
in every other config. As it turns out, this "minimized" config breaks when
the AT command interface is used with %CPI enabled, as the responsible code in
ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be
unsupported usage (perhaps they didn't care about the combination of a
voice-only PS with AT command control), but we do want this use case to work
without crashing. Solution: I made the largest prim pool the same as it is
with FAX_AND_DATA: 3 partitions of 1600 bytes.
| author | Space Falcon <falcon@ivan.Harhan.ORG> |
|---|---|
| date | Sat, 27 Jun 2015 07:31:30 +0000 |
| parents | e7ba9fcb3637 |
| children | 5cff3579814c |
line wrap: on
line source
CC= arm-elf-gcc CFLAGS= -Os -fno-builtin CPPFLAGS=-I../include LD= arm-elf-ld OBJCOPY=arm-elf-objcopy INSTDIR=/usr/local/share/freecalypso PROG= loadagent OBJS= crt0.o cmdtab.o main.o mygetchar.o LIBS= ../libcommon/libcommon.a ../libload/libload.a ../libprintf/libprintf.a LDS= ../env/iram.lds TC_LIBS=`${CC} -print-file-name=libc.a` \ `${CC} -print-file-name=libgcc.a` all: ${PROG}.srec crt0.S: ../env/crt0.S ln -s $< . ${PROG}.elf: ${OBJS} ${LIBS} ${LDS} ${LD} -N --defsym Base_addr=0x838000 --defsym stack_bottom=0x83FFFC \ -T ${LDS} -o $@ ${OBJS} \ --start-group ${LIBS} --end-group \ --start-group ${TC_LIBS} --end-group ${PROG}.srec: ${PROG}.elf ${OBJCOPY} -O srec --srec-forceS3 --srec-len=30 $< $@ install: mkdir -p ${INSTDIR} install -c ${PROG}.srec ${INSTDIR} clean: rm -f *.o *errs *core *.elf *.bin *.srec crt0.S FRC: