gsm-fw/gpf/conf/gsmcomp.c: increased max partition in the voice-only config The code we got from TCS211 had the maximum prim pool partition size set to 900 bytes in the voice-only config (no FAX_AND_DATA, no GPRS) and to 1600 bytes in every other config. As it turns out, this "minimized" config breaks when the AT command interface is used with %CPI enabled, as the responsible code in ATI does an ACI_MALLOC of 1012 bytes. TI may have considered this case to be unsupported usage (perhaps they didn't care about the combination of a voice-only PS with AT command control), but we do want this use case to work without crashing. Solution: I made the largest prim pool the same as it is with FAX_AND_DATA: 3 partitions of 1600 bytes.

CC=	arm-elf-gcc
OBJCOPY=arm-elf-objcopy

all:	payload.o payload.bin embed.c

.SUFFIXES: .o .bin

.o.bin:
	${OBJCOPY} -O binary $< $@

mkembed:	mkembed.c
	gcc -O2 -o $@ $@.c

embed.c:	payload.bin mkembed
	./mkembed payload.bin $@

clean:
	rm -f *.o *errs *core *.bin mkembed embed.c

FRC: