/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_rrgrr.val                                                    |
| SOURCE  : "sap\rrgrr.pdf"                                                |
| LastModified : "2003-11-19"                                              |
| IdAndVersion : "8441.112.03.031"                                         |
| SrcFileTime  : "Thu Nov 29 09:52:28 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_RRGRR_VAL
#define P_RRGRR_VAL


#define CDG_ENTER__P_RRGRR_VAL

#define CDG_ENTER__FILENAME _P_RRGRR_VAL
#define CDG_ENTER__P_RRGRR_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_RRGRR_VAL__LAST_MODIFIED _2003_11_19
#define CDG_ENTER__P_RRGRR_VAL__ID_AND_VERSION _8441_112_03_031

#define CDG_ENTER__P_RRGRR_VAL__SRC_FILE_TIME _Thu_Nov_29_09_52_28_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_RRGRR_VAL

#undef CDG_ENTER__FILENAME

#include "p_mph.val"   /* Access values independent from the corresponding h-file. */


/*
 * Value constants for VAL_cause
 */
#define GPRS_NOT_SUPPORTED             (0x0)      /* Serving cell does not support GPRS */
#define GPRS_SUPPORTED                 (0x1)      /* Serving cell supports GPRS     */
#define GPRS_CELL_NOT_SUITABLE         (0x2)      /* for GRR-controlled cell reselection */

/*
 * Value constants for VAL_si_to_read
 */
#define UNSPECIFIED_SI                 (0x0)      /* Update of unspecified SI message or SI messages */
#define UPDATE_SI1                     (0x1)      /* Update of SI1 message          */
#define UPDATE_SI2_SI2BIS_OR_SI2TER    (0x2)      /* Update of SI2, SI2 bis or SI2 ter message */
#define UPDATE_SI3_SI4_SI7_OR_SI8      (0x3)      /* Update of SI3, SI4, SI7 or SI8 message */
#define UPDATE_SI9                     (0x4)      /* Update of SI9 message          */
#define COMPLETE_SI                    (0x5)      /* Read complete SI               */
#define UPDATE_SI13                    (0xff)     /* Update or read of SI13         */

/*
 * Value constants for VAL_si1_state
 */
#define SI1_NOT_SEND                   (0x0)      /* SI not send                    */
#define SI1_RECEIVED                   (0x1)      /* SI received                    */
#define SI1_NOT_RECEIVED               (0x2)      /* SI not received                */

/*
 * Value constants for VAL_si3_state
 */
#define SI3_NOT_SEND                   (0x0)      /* SI not send                    */
#define SI3_RECEIVED                   (0x1)      /* SI received                    */
#define SI3_NOT_RECEIVED               (0x2)      /* SI not received                */

/*
 * Value constants for VAL_si13_state
 */
#define SI13_NOT_SEND                  (0x0)      /* SI not send                    */
#define SI13_RECEIVED                  (0x1)      /* SI received                    */
#define SI13_NOT_RECEIVED              (0x2)      /* SI not received                */

/*
 * Value constants for VAL_pg_type
 */
#define RRGRR_IMSI                     (0x0)      /* MS is paged by IMSI            */
#define RRGRR_PTMSI                    (0x1)      /* MS is paged by PTMSI (GPRS TMSI) */

/*
 * Value constants for VAL_rr_est
 */
#define RR_EST_NOT_ALLOWED             (0x0)      /* RR establishment not allowed   */
#define RR_EST_ALLOWED                 (0x1)      /* RR establishment allowed       */

// VALTAB-FF: REL99 
/*
 * Value constants for VAL_ecsc
 */
#define ECS_FORBIDDEN                  (0x0)      /* Early classmark sending forbidden in the cell */
#define ECS_ALLOWED                    (0x1)      /* Early classmark sending allowed in the cell */

/*
 * Value constants for VAL_susp_req
 */
#define SUSPENSION_REQ_NOT_NEEDED      (0x0)      /* RR need not send GPRS suspension request */
#define SUSPENSION_REQ_NEEDED          (0x1)      /* RR has to send GPRS suspension request */

/*
 * Value constants for VAL_r_bit
 */
#define CHAN_REQ_SENT_ONCE             (0x0)      /* MS has sent channel request only once */
#define CHAN_REQ_SENT_MORE             (0x1)      /* MS has sent channel request twice or more */

/*
 * Value constants for VAL_old_ptmsi
 */
#define RRGRR_PTMSI_INVALID            (0xffffffff)/* P-TMSI or TMSI invalid (see GSM 3.03) */

/*
 * Value constants for VAL_stop_cause
 */
#define CONTENTION_RESOLUTION_FAIL     (0x3)      /* Establishment fails due to contention resolution */
#define DL_ESTABLISHMENT_FAIL          (0x4)      /* Layer 2 establishment failure  */

/*
 * Value constants for VAL_arfcn
 */
#define RRGRR_INVALID_ARFCN            (0xffff)   /* Used to mark a channel number entry as invalid. */

/*
 * Value constants for VAL_sb_flag
 */
#define NO_SB_FOUND                    (0x0)      /* synchronisation burst not found */
#define SB_FOUND                       (0x1)      /* synchronisation burst found    */
#define SB_UNKNOWN                     (0x2)      /* status of synchronisation burst unknown */

/*
 * Value constants for VAL_bsic
 */
#define RRGRR_INVALID_BSIC             (0xff)     /* Used to identify a BSIC entry as invalid */

/*
 * Value constants for VAL_cr_type
 */
#define CR_NEW                         (0x0)      /* RR has to reselect the given cell */
#define CR_COMPLETE                    (0x1)      /* RR has to camp on this cell    */
#define CR_CONT                        (0x2)      /* Continue cell reselection.     */
#define CR_CS                          (0x3)      /* start cell selection process again */
#define CR_NEW_NOT_SYNCED              (0x4)      /* start cr for not syncd cell (ie. PCCO) */
#define CR_SUSPENDED_IDLE              (0x7c)     /* start idle procedures          */
#define CR_REQ_CANDIDATE               (0x7d)     /* inform GRR that is has to start a CR */
#define CR_NORMAL                      (0x7e)     /* Do not abort TBF               */
#define CR_ABNORMAL                    (0x7f)     /* Abort TBF                      */

/*
 * Value constants for VAL_sync_res
 */
#define SYNC_OK                        (0x0)      /* Synchronisation OK             */
#define SYNC_FAILED                    (0x1)      /* Synchronisation failed         */

/*
 * Value constants for VAL_cell_type
 */
#define SYNC_SCELL                     (0x0)      /* Synchronisation to serving cell */
#define SYNC_NCELL                     (0x1)      /* Synchronisation to neighbour cell */

/*
 * Value constants for VAL_pag_mode
 */
#define PAG_MODE_LAST_ONE              (0x0)      /* RR shall use the last page (before pag_Reorg) */
#define PAG_MODE_REORG                 (0x1)      /* RR shall use Paging reorg mode */
#define PAG_MODE_PTM_NP                (0x2)      /* RR shall use the NORMAL paging in packet transfer mode, start only CCCH */
#define PAG_MODE_PIM_NP                (0x3)      /* RR shall start only CCCH with REORG and change to NORMAL paging */
#define PAG_MODE_DEFAULT               (0xff)     /* RR shall use the default paging mode and goes to idle mode */

/*
 * Value constants for VAL_split_pg
 */
#define RRGRR_NO_DRX                   (0x2c0)    /* Non DRX mode                   */

/*
 * Value constants for VAL_rac
 */
#define RRGRR_RAC_INVALID              (0xff)     /* routing area code invalid      */

/*
 * Value constants for VAL_reconn_state
 */
#define RECONN_OK                      (0x0)      /* The reconnection to the 'old' channel was cuessful */
#define RECONN_LOW_FAIL                (0x1)      /* A Lower Layer Failure occured during the reconnection. */

/*
 * Value constants for VAL_reconn_cause
 */
#define RECONN_NORM_EVENT              (0x0)      /* Normal event                   */
#define RECONN_UNSPECIFIED             (0x1)      /* Abnormal release, unspecified  */
#define RECONN_CHN_UNACCEPTABLE        (0x2)      /* Abnormal release, channel unacceptable */
#define RECONN_TIMER_EXPIRED           (0x3)      /* Abnormal release, timer expired */
#define RECONN_NO_ACTIVITY             (0x4)      /* Abnormal release, no activity on the radio path */
#define RECONN_PREEMPTIVE              (0x5)      /* Preemptive release             */
#define RECONN_TA_OUT_OF_RANGE         (0x8)      /* Handover impossible, timing advance out of range */
#define RECONN_CHANNEL_MODE            (0x9)      /* Channel mode unacceptable      */
#define RECONN_FREQ_NOT_IMPL           (0xa)      /* Frequency not implemented      */
#define RECONN_CALL_CLEARED            (0x41)     /* Call already cleared           */
#define RECONN_INCORRECT_SEMANTIC      (0x5f)     /* Semantically incorrect message */
#define RECONN_INVALID_INFO            (0x60)     /* Invalid mandatory information  */
#define RECONN_UNKNWN_MSG_TYPE         (0x61)     /* Message type non-existent or not implemented */
#define RECONN_INCMPTBLE_MSG_TYPE      (0x62)     /* Message type not compatible with protocol state */
#define RECONN_COND_IE_ERROR           (0x64)     /* Conditional IE error           */
#define RECONN_NO_CELL_ALLOC           (0x65)     /* No cell allocation available   */
#define RECONN_PROT_UNSPECIFIED        (0x6f)     /* Protocol error unspecified     */

/*
 * Value constants for VAL_ident_type
 */
#define ID_IMSI                        (0x1)      /* Paged by IMSI                  */
#define ID_TMSI                        (0x4)      /* Paged by TMSI                  */
#define ID_PTMSI                       (0x8)      /* Paged by PTMSI                 */

/*
 * Value constants for VAL_report_type
 */
#define REP_TYPE_1                     (0x0)      /* synchronize to the 6 strongest carriers and provide their BSICs */
#define REP_TYPE_2                     (0x1)      /* synchronize to carriers in decreasing field strength until the BSICs for 6 carriers with allowed NCC are fully decoded */
#define REP_TYPE_3                     (0x2)      /* no synchronization, no BSICs are provided */
#define REP_TYPE_RES                   (0x3)      /* reserved, ignore request for measurement data in this version */

/*
 * Value constants for VAL_xmeas_cause
 */
#define EXT_MEAS_OK                    (0x0)      /* The results of the Extended Measurment procedure are valid. */
#define EXT_MEAS_RESET                 (0x1)      /* GRR has stopped the Extended Measurement procedure */
#define EXT_MEAS_LEAVE_IDLE            (0x2)      /* RR has entered a non-idle state and stopped the Extended Measurement procedure */

/*
 * Value constants for VAL_lac
 */
#define VAL_LAC___DEF                  (0x0)      /* lac                            */
#define RRGRR_LA_INVALID               (0xfffe)   /* la invalid                     */

/*
 * Value constants for VAL_v_stop_ccch
 */
#define DONT_STOP_CCCH                 (0x0)      /* Don't stop CCCH                */
#define STOP_CCCH                      (0x1)      /* Stop CCCH                      */
#define INVALID_MSG                    (0x2)      /* The message was not assigned to MS */
#define TASK_STOP_DUMMY_VALUE          (0x3)      /* Dummy value, only used for GRR internal purposes */

/*
 * Value constants for VAL_rxlev
 */
#define RRGRR_INVALID_RXLEV            (0x80)     /* receive signal strength level not present */

/*
 * Value constants for VAL_idx
 */
#define RRGRR_INVALID_IDX              (0xff)     /* index not present              */

/*
 * Value constants for VAL_state
 */
#define TASK_STATE_PIM                 (0x0)      /* Packet Idle Mode               */
#define TASK_STATE_PAM                 (0x1)      /* Packet Access Mode             */
#define TASK_STATE_PTM                 (0x2)      /* Packet Transfer Mode           */

/*
 * Value constants for VAL_cell_bar_access_2
 */
#define CBA_2_NORMAL                   (0x0)      /* Status for cell reselection is set to normal */
#define CBA_2_BARRED                   (0x1)      /* Status for cell reselection is set to barred */

/*
 * Value constants for VAL_exc_acc
 */
#define EXC_ACC_NORMAL                 (0x0)      /* Status for cell selection and reselection is set to normal */
#define EXC_ACC_LIMITED                (0x1)      /* The MS is only allowed to camp on the cell for limited service */

/*
 * Value constants for VAL_same_ra_as_serving_cell
 */
#define DIFFERENT_RA_AS_SCELL          (0x0)      /* The cell is in a routing area different from the serving cell */
#define SAME_RA_AS_SCELL               (0x1)      /* The cell is in the same routing area as the serving cell */

/*
 * Value constants for VAL_gprs_reselect_offset
 */
#define GPRS_RESEL_OFF_DEFAULT         (0x10)     /* Default value (0 dB)           */
#define GPRS_RESEL_OFF_INVALID         (0xff)     /* This value is used to indicate the absence of this parameter */

/*
 * Value constants for VAL_gprs_rxlev_access_min
 */
#define GPRS_RXLEV_ACCESS_MIN_INVALID  (0xff)     /* This value is used to indicate the absence of this parameter */

/*
 * Value constants for VAL_gprs_ms_txpwr_max_cch
 */
#define GPRS_MS_TXPWR_MAX_CCH_INVALID  (0xff)     /* This value is used to indicate the absence of this parameter */

/*
 * Value constants for VAL_gprs_temporary_offset
 */
#define GPRS_TEMPORARY_OFFSET_INVALID  (0xff)     /* This value is used to indicate the absence of this parameter */

/*
 * Value constants for VAL_gprs_penalty_time
 */
#define GPRS_PENALTY_TIME_INVALID      (0xff)     /* This value is used to indicate the absence of this parameter */

/*
 * Value constants for VAL_priority_class
 */
#define GPRS_PRIORITY_CLASS_INVALID    (0xff)     /* This value is used to indicate the absence of this parameter */

/*
 * Value constants for VAL_hcs_thr
 */
#define GPRS_HCS_THR_INVALID           (0xff)     /* This value is used to indicate the absence of this parameter */

/*
 * Value constants for VAL_si13_location
 */
#define SI13_LOC_BCCH_NORM             (0x0)      /* SYSTEM INFORMATION TYPE 13 message is sent on BCCH norm */
#define SI13_LOC_BCCH_EXT              (0x1)      /* SYSTEM INFORMATION TYPE 13 message is sent on BCCH ext */
#define SI13_LOC_INVALID               (0xff)     /* This value is used to indicate the absence of this parameter */

/*
 * Value constants for VAL_pbcch_location
 */
#define PBCCH_LOC_INVALID              (0xff)     /* This value is used to indicate the absence of this parameter */

/*
 * Value constants for VAL_psi1_repeat_period
 */
#define PSI1_RPT_PRD_INVALID           (0xff)     /* This value is used to indicate the absence of this parameter */

/*
 * Value constants for VAL_nc_mode
 */
#define NC2_NOT_USED                   (0x0)      /* allow cell reselection         */
#define NC2_USED                       (0x1)      /* inhibit cell reselection       */
#define NC_MODE_RESET                  (0x2)      /* NC is reset to default         */

/*
 * Value constants for VAL_meas_cause
 */
#define NC_STOP_MEAS                   (0x0)      /*  Stop the meas report          */
#define NC_START_MEAS                  (0x1)      /* Start Averaging of measurements */
#define NC_REPORT_MEAS                 (0x2)      /* get the meas report from RR    */

/*
 * Value constants for VAL_sync_type
 */
#define SYNC_INITIAL                   (0x0)      /* Sync request for new carrier   */
#define SYNC_RECONFIRM                 (0x1)      /* Reconfirm 10 sec Timer Expired */

/*
 * Value constants for VAL_rep_rate
 */
#define NORMAL_REP_RATE                (0x0)      /* Normal(SACCH)reporting rate    */
#define REDUCED_REP_RATE               (0x1)      /* Reduced reporting rate         */

/*
 * Value constants for Val_inv_bsic
 */
#define INV_BSIC_REPORTING_DISABLED    (0x0)      /* Invalid BSIC reporting not enabled */
#define INV_BSIC_REPORTING_ENABLED     (0x1)      /* Invalid BSIC reporting not enabled */

/*
 * Value constants for Val_scale_ord
 */
#define SCALE_0dB                      (0x0)      /* Scaling by 0dB                 */
#define SCALE_10dB                     (0x1)      /* Scaling by 10dB                */
#define SCALE_AUTO                     (0x2)      /* Automatic scaling              */

// VALTAB-FF: REL99 AND TI_PS_FF_EMR 
/*
 * Value constants for Val_nco
 */
// VAL-FF: REL99 AND TI_PS_FF_EMR  
#define NCO_NC0                        (0x0)      /* Values Item                    */
// VAL-FF: REL99 AND TI_PS_FF_EMR  
#define NCO_NC1                        (0x1)      /* Values Item                    */
// VAL-FF: REL99 AND TI_PS_FF_EMR  
#define NCO_NC2                        (0x2)      /* Values Item                    */
// VAL-FF: REL99 AND TI_PS_FF_EMR  
#define NCO_RESET                      (0x3)      /* Values Item                    */
// VAL-FF: REL99 AND TI_PS_FF_EMR  
#define NCO_EMPTY                      (0x4)      /* Values Item                    */

/* 
 * enum to UnionController task 
 * CCDGEN:WriteEnum_Count==455
 */
#ifndef __T_ctrl_task__
#define __T_ctrl_task__
typedef enum
{
  RR_TASK_1                      = 0x0,           
  LEAVE_PIM_PBCCH                = 0x1,           
  LEAVE_PAM_PBCCH                = 0x2,           
  LEAVE_PTM_PBCCH                = 0x3            
}T_ctrl_task;
#endif

/*
 * user defined constants
 */
#define RRGRR_MAX_ARFCN_NCELL_SYNC_REQ (0xc)      
#define RRGRR_MAX_ARFCN_EXT_MEAS       (0x40)     
// CONST-FF: !REL99 OR !TI_PS_FF_EMR  
// #define RRGRR_MEAS_REP_LIST_SIZE       (0x7)   
#define RRGRR_BA_LIST_SIZE             (0x20)     
#define SIZE_MCC                       (0x3)      
#define SIZE_MNC                       (0x3)      
// CONST-FF: REL99 AND TI_PS_FF_EMR  
#define RRGRR_MAX_RSLT_NCELL_SYNC_IND  (0xc)      
// CONST-FF: !REL99 OR !TI_PS_FF_EMR  
// #define RRGRR_MAX_RSLT_NCELL_SYNC_IND  (0x6)   
// CONST-FF: REL99 AND TI_PS_FF_EMR  
#define RRGRR_MEAS_REP_LIST_SIZE       (0x21)     
#define MAX_NUM_OF_RTD_VALUES          (0x3)      

#include "CDG_LEAVE.h"


#endif