FreeCalypso > hg > freecalypso-sw
view loadtools/scripts/compal.config @ 758:3b690364119a
sms_csf.c compiles
author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
---|---|
date | Sat, 11 Oct 2014 22:47:33 +0000 |
parents | d8a120647649 |
children |
line wrap: on
line source
# This configuration is intended to be applicable to all of C11x, C123, # C139 and C140. The "plain" version of compalstage selected below # should work for all C11x/123; it will also work on C139/140 phones # that had the simpler boot code flashed into them, as will be used for # FreeCalypso. When running loadtools with this config on C139/140 # phones that still have the "official" fw in them, one will need to # specify -h compal -c 1003 to use the inefficient ~15 KiB version of # compalstage. compal-stage plain # Whether we are breaking in through compalstage (as above) or through # tfc139, the re-enabled Calypso boot ROM is used to load our loadagent # into IRAM. The boot ROM will autodetect the Calypso input clock as # 26 MHz (physical reality) when entered through compalstage, or as # 13 MHz when entered through tfc139 - the latter results from the # original fw setting bit 7 in the FFFF:FD02 register (VTCXO_DIV2), # which the boot ROM does not clear. # # However, the following configuration will result in the ARM core # being clocked at 52 MHz in both cases. pll-config 4/1 rhea-cntl 0x00 # The remaining settings are carried out via loadagent commands init-script compal.init # Flash: use CFI autodetection, 4 MiB max # mapped at 0, see compal.init for the explanation flash cfi-4M 0 boot-reflash-hack 0x820000 0x10000 # Perform a Iota poweroff when we are done exit-mode iota-off