FreeCalypso > hg > freecalypso-sw

view gsm-fw/bsp/mem.h @ 408:431023033c86

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
Intel flash: flash status command implemented
author Michael Spacefalcon <msokolov@ivan.Harhan.ORG>
date Tue, 17 Jun 2014 01:52:46 +0000
parents afceeeb2cba1
children
line wrap: on
line source

/******************************************************************************
            TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION           
                                                                             
   Property of Texas Instruments -- For  Unrestricted  Internal  Use  Only 
   Unauthorized reproduction and/or distribution is strictly prohibited.  This 
   product  is  protected  under  copyright  law  and  trade  secret law as an 
   unpublished work.  Created 1987, (C) Copyright 1997 Texas Instruments.  All 
   rights reserved.                                                            
                  
                                                           
   Filename       	: mem.h

   Description    	: Header file for the memory interface module

   Project        	: Drivers

   Author         	: proussel@ti.com  Patrick Roussel.

   Version number	: 1.12

   Date and time	: 01/30/01 10:22:24

   Previous delta 	: 12/19/00 14:24:11

   SCCS file      	: /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/RELEASE_GPRS/drivers1/common/SCCS/s.mem.h

   Sccs Id  (SID)       : '@(#) mem.h 1.12 01/30/01 10:22:24 '
 
*****************************************************************************/

#include "../include/config.h"

#define MEM_APIC_REG	0xffe00000	/* APIC register address */

#define MEM_STR1_ADDR	0xfffe0000	/* Strobe 1 : address */
#define MEM_STR1_CS	32		/* Strobe 1 : number of CS */
#define MEM_STR0_ADDR	0xffff0000	/* Strobe 0 : address */
#define MEM_STR0_CS	31		/* Strobe 0 : number of CS */


#define MEM_STR_LENGTH	2048		/* Strobe : length of a CS space */

#define MEM_UART_IRDA   0xFFFF5000
#define MEM_UART_MODEM  0xFFFF5800
#if (CHIPSET == 12)
  #define MEM_UART_MODEM2  0xFFFFE000
#endif

#define MEM_RIF         0xFFFF7000

#define MEM_TCIF        0xFFFEA800
#define MEM_ICR         0xFFFEB000

/**** Generic masks ****/
#define BIT0            0x00000001L
#define BIT1            0x00000002L
#define BIT2            0x00000004L
#define BIT3            0x00000008L
#define BIT4            0x00000010L
#define BIT5            0x00000020L
#define BIT6            0x00000040L
#define BIT7            0x00000080L
#define BIT8            0x00000100L
#define BIT9            0x00000200L
#define BIT10           0x00000400L
#define BIT11           0x00000800L
#define BIT12           0x00001000L
#define BIT13           0x00002000L
#define BIT14           0x00004000L
#define BIT15           0x00008000L
#define BIT16           0x00010000L


#define MEM_DEV_ID0     0xFFFEF000
#define MEM_DEV_ID1     0xFFFEF002


// Register read and write macros.
#define READ_REGISTER_ULONG  ( reg )      ( *(volatile unsigned long * const )( reg ) )
#define WRITE_REGISTER_ULONG ( reg, val ) ( *(volatile unsigned long * const )( reg ) ) = ( val )
#define READ_REGISTER_USHORT ( reg )      ( *(volatile unsigned short * const)( reg ) )
#define WRITE_REGISTER_USHORT( reg, val ) ( *(volatile unsigned short * const)( reg ) ) = ( val )
#define READ_REGISTER_UCHAR  ( reg )      ( *(volatile unsigned char * const )( reg ) )
#define WRITE_REGISTER_UCHAR ( reg, val ) ( *(volatile unsigned char * const )( reg ) ) = ( val )


/**** External memory register ****/
#define MEM_TIMER_ADDR	0xfffff800	/* TIMER control register */
#if (CHIPSET == 12)
  #define MEM_TIMER_SEC_ADDR     0xfffff880  /* TIMER Secure control register */
#endif

#define MEM_RHEA_CNTL	0xfffff900	/* memory RHEA control register */
#define MEM_API_CNTL 	0xfffff902	/* memory API control register */
#define MEM_ARM_RHEA 	0xfffff904	/* memory ARM/RHEA control register */
#define ENHANCED_RHEA_CNTL 0xfffff906	/* memory ARM/RHEA control register */

#define MEM_INTH_ADDR 	0xfffffa00		/* INTH registers addr. */
#define MEM_REG_ADDR 	0xfffffb00		/* memory i/f registers addr. */
#define MEM_REG_nCS0 	(MEM_REG_ADDR + 0) 	/* nCS0 register address */
#define MEM_REG_nCS1 	(MEM_REG_ADDR + 2) 	/* nCS1 register address */
#define MEM_REG_nCS2 	(MEM_REG_ADDR + 4) 	/* nCS2 register address */
#define MEM_REG_nCS3 	(MEM_REG_ADDR + 6) 	/* nCS3 register address */

#if ((CHIPSET == 3) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 9))
  #define MEM_REG_nCS4 	(MEM_REG_ADDR + 8) 	/* nCS4 register address */
  #define MEM_REG_nCS5 	(MEM_REG_ADDR + 0xa) 	/* nCS5 register address */
  #define MEM_REG_nCS6 	(MEM_REG_ADDR + 0xc) 	/* nCS6 register address */
#elif ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11))
  #define MEM_REG_nCS4 	(MEM_REG_ADDR + 0xa) 	/* nCS4 register address */
  #define MEM_REG_nCS6 	(MEM_REG_ADDR + 0xc) 	/* nCS6 register address */
  #define MEM_REG_nCS7 	(MEM_REG_ADDR + 0x8) 	/* nCS7 register address */
#elif (CHIPSET == 12)
  #define MEM_REG_nCS4     (MEM_REG_ADDR + 0x8)  /* nCS4 register address */
  #define MEM_REG_nCS5     (MEM_REG_ADDR + 0xa)  /* nCS5 register address */
  #define MEM_REG_DSPMS    (MEM_REG_ADDR + 0x2e) /* DSPMS register address */
#else
  #define MEM_REG_nCS4 	(MEM_REG_ADDR + 8) 	  /* nCS4 register address */
  #define MEM_REG_nCS5 	(MEM_REG_ADDR + 0xa) 	/* nCS5 register address */
#endif

#define MEM_CTRL_REG	(MEM_REG_ADDR + 0xe) 	/* Control register address */

#if (CHIPSET == 12)
  #define MEM_DMA_ADDR       0xffffe800            /* DMA controller reg. addr. */
#else
  #define MEM_DMA_ADDR 	0xfffffc00		/* DMA controller reg. addr. */
#endif

#define MEM_CLKM_ADDR 	0xfffffd00		/* CLKM registers addr. */
#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET  ==  11) || (CHIPSET  ==  12))
  #define MEM_DPLL_ADDR   0xffff9800   /* DPLL control register */
#endif

#if (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET  ==  11) || (CHIPSET  ==  12)
  #define MEM_MPU_ADDR    0xFFFFFF00   /* Base address of MPU module */
#endif

#define RTC_XIO_START   0xfffe1800

#define ARM_CONF_REG    0xFFFEF006

    #define MEM_SIM         0xFFFE0000
    #define MEM_TSP         0xFFFE0800
    #define MEM_TPU_REG     0xFFFE1000
    #define MEM_TPU_RAM     0xFFFE1400
    #define MEM_RTC         0xFFFE1800
    #define MEM_ULPD        0xFFFE2000
    #define MEM_SPI         0xFFFE3000
    #define MEM_TIMER1      0xFFFE3800
    #define MEM_UWIRE       0xFFFE4000
    #define MEM_ARMIO       0xFFFE4800
    #define MEM_TIMER2      0xFFFE6800
    #define MEM_LPG         0xFFFE7800
    #define MEM_PWL         0xFFFE8000
    #define MEM_PWT         0xFFFE8800
    #if (CHIPSET == 12)
      #define MEM_KEYBOARD  0xFFFEB800
    #endif
    #define MEM_JTAGID_PART	0xFFFEF000		/* JTAG ID code register */
    #define MEM_JTAGID_VER	0xFFFEF002		/* JTAG ID code register */
#if (CHIPSET != 12)
    #define MEM_IO_SEL      0xFFFEF00A
#endif


/**** External memory register ****/

#define MEM_REG_WS 	0x001f 		/* number of wait states */
#define MEM_REG_DVS 0x0060 		/* device size */
#define MEM_REG_WE 	0x0080 		/* write enable */
#define MEM_REG_BIG 0x0100 		/* big endian */

#define MEM_DVS_8 	0 		/* device size = 8 bits */
#define MEM_DVS_16 	1  		/* device size = 16 bits */
#define MEM_DVS_32 	2		/* device size = 32 bits */


#define MEM_WRITE_DIS 	0  		/* write disable */
#define MEM_WRITE_EN 	1  		/* write enable */

#define MEM_LITTLE 	0  		/* little endian */
#define MEM_BIG 	1  		/* big endian */

#define MEM_NO_ADAPT 0  		/* no memory adaptation */
#define MEM_ADAPT 	 1  		/* memory adaptation */

/**** Memory control register ****/

#define MEM_CNTL_0_BIG    0x01          /* Big Endian for strobe 0 */
#define MEM_CNTL_0_ADAP   0x02          /* size adaptation for strobe 0 */
#define MEM_CNTL_1_BIG    0x04          /* Big Endian for strobe 1 */
#define MEM_CNTL_1_ADAP   0x08          /* size adaptation for strobe 1 */
#define MEM_CNTL_API_BIG  0x10          /* Big Endian for API */
#define MEM_CNTL_API_ADAP 0x20          /* size adaptation for API */
#define MEM_CNTL_DBG      0x40          /* debug */


#define ARM_CLK_SRC 0x04
#define ARM_MCLK_DIV 0x30
#define TPU_CLK_ENABLE 0x400

#if (CHIPSET == 12)
/**** DSP Memory shared register ****/

#define MEM_DSPMS_0_MB_TO_DSP   ( 0 )
#define MEM_DSPMS_0_5_MB_TO_DSP ( 1 )

#endif

#if (CHIPSET == 12)
  #define ASIC_CONF         0xfffef01c
#else
  #define ASIC_CONF         0xfffef008
#endif

// duplicate definition with MEM_ARMIO !!
//#define ARMIO_ADDR       0xfffe4800

/**** Config registers  ****/
#if (CHIPSET != 12)
  #define QUARTZ_REG        0xfffef00c
#endif

#define MEM_INIT_CS0(d_ws, d_dvs, d_we, d_dc) ( \
  *((volatile UWORD16 *) MEM_REG_nCS0 ) = (d_ws | (d_dvs << 5) | (d_we << 7) | (d_dc << 9)))

#define MEM_INIT_CS1(d_ws, d_dvs, d_we, d_dc) ( \
  *((volatile UWORD16 *) MEM_REG_nCS1 ) = (d_ws | (d_dvs << 5) | (d_we << 7) | (d_dc << 9)))

#define MEM_INIT_CS2(d_ws, d_dvs, d_we, d_dc) ( \
  *((volatile UWORD16 *) MEM_REG_nCS2 ) = (d_ws | (d_dvs << 5) | (d_we << 7) | (d_dc << 9)))

#define MEM_INIT_CS3(d_ws, d_dvs, d_we, d_dc) ( \
  *((volatile UWORD16 *) MEM_REG_nCS3 ) = (d_ws | (d_dvs << 5) | (d_we << 7) | (d_dc << 9)))

#define MEM_INIT_CS4(d_ws, d_dvs, d_we, d_dc) ( \
  *((volatile UWORD16 *) MEM_REG_nCS4 ) = (d_ws | (d_dvs << 5) | (d_we << 7) | (d_dc << 9)))

#if (CHIPSET == 12)
  #define MEM_INIT_CS5(d_ws, d_dvs, d_we, d_dc) ( \
    *((volatile UWORD16 *) MEM_REG_nCS5 ) = (d_ws | (d_dvs << 5) | (d_we << 7) | (d_dc << 9)))
#endif

#if ((CHIPSET == 3) || (CHIPSET == 4) || (CHIPSET == 5) || (CHIPSET == 6) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 9) || (CHIPSET == 10) || (CHIPSET == 11))
  #define MEM_INIT_CS6(d_ws, d_dvs, d_we, d_dc) ( \
    *((volatile UWORD16 *) MEM_REG_nCS6 ) = (d_ws | (d_dvs << 5) | (d_we << 7) | (d_dc << 9)))
#endif

#if ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11))
  #define MEM_INIT_CS7(d_ws, d_dvs, d_we, d_dc) ( \
    *((volatile UWORD16 *) MEM_REG_nCS7 ) = (d_ws | (d_dvs << 5) | (d_we << 7) | (d_dc << 9)))
#endif

#if (CHIPSET == 12)
  #define MEM_INIT_DSPMS(d_share) ( \
    *((volatile UWORD16 *) MEM_REG_DSPMS ) = (d_share & 0x0003))
#endif

/********************** Prototypes ************************/

short MEM_InitCtrl(unsigned short Big0, unsigned short Adap0, unsigned short Big1, unsigned short Adap1, 
		   unsigned short BigAPI, unsigned short AdapAPI, unsigned short debug);
short MEM_SetCtrlAPI(unsigned short Big, unsigned short Adap);