FreeCalypso > hg > freecalypso-sw
view loadtools/scripts/pirelli.config @ 674:5ec79b82ab04
gsm-fw/g23m-gsm: stub Makefile hierarchy created, hooked into make clean
author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
---|---|
date | Sun, 28 Sep 2014 23:29:16 +0000 |
parents | c3158d30ff0c |
children |
line wrap: on
line source
# The following parameters go into the <p command sent to the boot ROM pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz rhea-cntl 0x00 # fastest setting, used by OsmocomBB, presumably correct # The remaining settings are carried out via loadagent commands init-script pirelli.init # Flash type and chip select base addresses flash pl129n 0x03000000 0x02000000 # On this phone the current best exit strategy is jump0. # A Iota power-off, even if we implement one, won't be any different: # having the serial connection implies a USB connection, that in turn # implies having VBUS, and thus a Iota power-off will immediately # result in another power-on for charger-insert. exit-mode jump0