FreeCalypso > hg > freecalypso-sw
view nuc-fw/bsp/timer1.h @ 137:5fe5559003b7
RV bring-up: RVT "system time" heartbeat messages now get printed every 20 s!
The problem was a slight Nucleus API incompatibility between what the RVF code
from TCS211 expected and what our FreeNucleus implements: in the TCS211
version of Nucleus it was OK to pass 0 for the initial_time parameter to
NU_Create_Timer(), but our version flags such usage as an error.
RVF used 0 as the dummy initial_time value when initializing the legacy RV
timers with NU_DISABLE_TIMER. Implemented fix: using a dummy value of 1
instead.
author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
---|---|
date | Mon, 11 Nov 2013 09:56:23 +0000 |
parents | 91460c8957f0 |
children |
line wrap: on
line source
/******************************************************************************* TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION Property of Texas Instruments -- For Unrestricted Internal Use Only Unauthorized reproduction and/or distribution is strictly prohibited. This product is protected under copyright law and trade secret law as an unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All rights reserved. Filename : timer1.h Description :TIMER1 Project : drivers Author : pmonteil@tif.ti.com Patrice Monteil. Version number : 1.7 Date and time : 02/15/01 15:47:06 Previous delta : 02/15/01 15:47:06 SCCS file : /db/gsm_asp/db_ht96/dsp_0/gsw/rel_0/mcu_l1/release_gprs/mod/emu_p/EMU_P_FRED/drivers1/common/SCCS/s.timer1.h Sccs Id (SID) : '@(#) timer1.h 1.7 02/15/01 15:47:06 ' *****************************************************************************/ #include "../include/sys_types.h" /**** DIONE TIMERs configuration register ****/ #define D_TIMER_ADDR 0xfffe3800 #define D_TIMER_CNTL_MASK 0x001f #define CNTL_D_TIMER_OFFSET 0x0000 #define LOAD_D_TIMER_OFFSET 0x0002 #define READ_D_TIMER_OFFSET 0x0004 #define D_TIMER_CNTL (D_TIMER_ADDR+CNTL_D_TIMER_OFFSET) #define D_TIMER_LOAD (D_TIMER_ADDR+LOAD_D_TIMER_OFFSET) #define D_TIMER_READ (D_TIMER_ADDR+READ_D_TIMER_OFFSET) #define D_TIMER_ST 0x0001 /* bit 0 */ #define D_TIMER_AR 0x0002 /* bit 1 */ #define D_TIMER_PTV 0x001c /* bits 4:2 */ #define D_TIMER_CLK_EN 0x0020 /* bit 5 */ #define D_TIMER_RUN 0x0021 /* bit 5 ,0 */ #define LOAD_TIM 0xffff /* bits 15:0 */ /* ----- Prototypes ----- */ SYS_UWORD16 Dtimer1_Get_cntlreg(void); void Dtimer1_AR(SYS_UWORD16 Ar); void Dtimer1_PTV(SYS_UWORD16 Ptv); void Dtimer1_Clken(SYS_UWORD16 En); void Dtimer1_Start (SYS_UWORD16 startStop); void Dtimer1_Init_cntl (SYS_UWORD16 St, SYS_UWORD16 Reload, SYS_UWORD16 clockScale, SYS_UWORD16 clkon); void Dtimer1_WriteValue (SYS_UWORD16 value); SYS_UWORD16 Dtimer1_ReadValue (void);