FreeCalypso > hg > freecalypso-sw
view target-utils/include/abbdefs.h @ 461:7017da4978bb
OSL: os_tim_ir.c started
author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
---|---|
date | Mon, 23 Jun 2014 18:37:19 +0000 |
parents | e60aecf23970 |
children |
line wrap: on
line source
/* lifted from OsmocomBB */ #ifndef _TWL3025_H #define _TWL3025_H #define PAGE(n) (n << 7) enum twl3025_reg { VRPCCFG = PAGE(1) | 30, VRPCDEV = PAGE(0) | 30, VRPCMSK = PAGE(1) | 31, VRPCMSKABB = PAGE(1) | 29, VRPCSTS = PAGE(0) | 31, /* Monitoring ADC Registers */ MADCTRL = PAGE(0) | 13, MADCSTAT = PAGE(0) | 24, VBATREG = PAGE(0) | 15, VCHGREG = PAGE(0) | 16, ICHGREG = PAGE(0) | 17, VBKPREG = PAGE(0) | 18, ADIN1REG = PAGE(0) | 19, ADIN2REG = PAGE(0) | 20, ADIN3REG = PAGE(0) | 21, ADIN4REG = PAGE(0) | 22, /* Clock Generator Registers */ TOGBR1 = PAGE(0) | 4, TOGBR2 = PAGE(0) | 5, PWDNRG = PAGE(1) | 9, TAPCTRL = PAGE(1) | 19, TAPREG = PAGE(1) | 20, /* Automatic Frequency Control (AFC) Registers */ AUXAFC1 = PAGE(0) | 7, AUXAFC2 = PAGE(0) | 8, AFCCTLADD = PAGE(1) | 21, AFCOUT = PAGE(1) | 22, /* Automatic Power Control (APC) Registers */ APCDEL1 = PAGE(0) | 2, APCDEL2 = PAGE(1) | 26, AUXAPC = PAGE(0) | 9, APCRAM = PAGE(0) | 10, APCOFF = PAGE(0) | 11, APCOUT = PAGE(1) | 12, /* Auxiliary DAC Control Register */ AUXDAC = PAGE(0) | 12, /* SimCard Control Register */ VRPCSIM = PAGE(1) | 23, /* LED Driver Register */ AUXLED = PAGE(1) | 24, /* Battery Charger Interface (BCI) Registers */ CHGREG = PAGE(0) | 25, BCICTL1 = PAGE(0) | 28, BCICTL2 = PAGE(0) | 29, BCICONF = PAGE(1) | 13, /* Interrupt and Bus Control (IBIC) Registers */ ITMASK = PAGE(0) | 28, ITSTATREG = PAGE(0) | 27, /* both pages! */ PAGEREG = PAGE(0) | 1, /* both pages! */ /* Baseband Codec (BBC) Registers */ BULIOFF = PAGE(1) | 2, BULQOFF = PAGE(1) | 3, BULIDAC = PAGE(1) | 5, BULQDAC = PAGE(1) | 4, BULGCAL = PAGE(1) | 14, BULDATA1 = PAGE(0) | 3, /* 16 words */ BBCTRL = PAGE(1) | 6, /* Voiceband Codec (VBC) Registers */ VBCTRL1 = PAGE(1) | 8, VBCTRL2 = PAGE(1) | 11, VBPOP = PAGE(1) | 10, VBUCTRL = PAGE(1) | 7, VBDCTRL = PAGE(0) | 6, }; #define BULDATA2 BULDATA1 /* available ADC inputs on IOTA */ enum twl3025_dac_inputs {/* === Signal ============================= */ MADC_VBAT=0, /* battery voltage / 4 */ MADC_VCHG=1, /* charger voltage / 5 */ MADC_ICHG=2, /* I-sense amp or CHGREG DAC output */ MADC_VBKP=3, /* backup battery voltage / 4 */ MADC_ADIN1=4, /* VADCID, sense battery type, not used */ MADC_ADIN2=5, /* Temperature sensor in Battery */ MADC_ADIN3=6, /* Mode_detect: sense 2.5mm jack insertion */ MADC_ADIN4=7, /* RITA: TEMP_SEN */ MADC_NUM_CHANNELS=8 }; enum madcstat_reg_bits { /* monitoring ADC status register */ ADCBUSY = 0x01 /* if set, a conversion is currently going on */ }; /* BCICTL1 register bits */ enum bcictl1_reg_bits { MESBAT = 1<<0, /* connect resistive divider for bat voltage */ DACNBUF = 1<<1, /* bypass DAC buffer */ THSENS0 = 1<<3, /* thermal sensor bias current (ADIN2), bit 0 */ THSENS1 = 1<<4, /* "" bit 1 */ THSENS2 = 1<<5, /* "" bit 2 */ THEN = 1<<6, /* enable thermal sensor bias current (ADIN1) */ TYPEN = 1<<7 /* enable bias current for battery type reading */ }; /* BCICTL1 register bits */ enum bcictl2_reg_bits { CHEN = 1<<0, /* enable charger */ CHIV = 1<<1, /* 1=constant current, 0=constant voltage */ CHBPASSPA=1<<2, /* full charging of the battery during pulse radio */ CLIB = 1<<3, /* calibrate I-to-V amp (short input pins) */ CHDISPA = 1<<4, /* disabel charging during pulse radio (???) */ LEDC = 1<<5, /* enable LED during charge */ CGAIN4 = 1<<6, /* if set, I-to-V amp gain is reduced from 10 to 4 */ PREOFF = 1<<7 /* disable battery precharge */ }; enum vrpcsts_reg_bits { ONBSTS = 1<<0, /* button push switched on the mobile */ ONRSTS = 1<<1, /* RPWON terminal switched on the mobile */ ITWSTS = 1<<2, /* ITWAKEUP terminal switched on the mobile */ CHGSTS = 1<<3, /* plugging in charger has switched on the mobile */ ONREFLT= 1<<4, /* state of PWON terminal after debouncing */ ONMRFLT= 1<<5, /* state of RPWON terminal after debouncing */ CHGPRES= 1<<6 /* charger is connected */ }; enum togbr2_bits { TOGBR2_KEEPR = (1 << 0), /* Clear KEEPON bit */ TOGBR2_KEEPS = (1 << 1), /* Set KEEPON bit */ TOGBR2_ACTR = (1 << 2), /* Dectivate MCLK */ TOGBR2_ACTS = (1 << 3), /* Activate MCLK */ TOGBR2_IBUFPTR1 = (1 << 4), /* Initialize pointer of burst buffer 1 */ TOGBR2_IBUFPTR2 = (1 << 5), /* Initialize pointer of burst buffer 2 */ TOGBR2_IAPCPTR = (1 << 6), /* Initialize pointer of APC RAM */ }; /* How a RAMP value is encoded */ #define ABB_RAMP_VAL(up, down) ( ((down & 0x1F) << 5) | (up & 0x1F) ) enum twl3025_unit { TWL3025_UNIT_AFC, TWL3025_UNIT_MAD, TWL3025_UNIT_ADA, TWL3025_UNIT_VDL, TWL3025_UNIT_VUL, }; enum twl3025_tsp_bits { BULON = 0x80, BULCAL = 0x40, BULENA = 0x20, BDLON = 0x10, BDLCAL = 0x08, BDLENA = 0x04, STARTADC = 0x02, }; #endif