FreeCalypso > hg > freecalypso-sw
view gsm-fw/L1/tm_cust0/l1tm_cust.h @ 1021:8b52011dc66a
doc/Pirelli-Howto: update for the current situation
author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 23 Apr 2016 06:19:09 +0000 |
parents | 57ad8f4d5cb5 |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1TM_CUST.H * * Filename l1tm_cust.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ /*---------------------------------------------------------*/ /* Initial settings for test mode config => Cust_tm_init() */ /*---------------------------------------------------------*/ // Control algorithm settings: 0=>OFF, 1=>ON #define AGC_ENABLE 1 #define AFC_ENABLE 1 // ADC conversion setting: 0=>OFF, 1=>ON #define ADC_ENABLE 1 // AGC settings #define TM_AGC_VALUE 50 // AGC gain #define TM_LNA_OFF 0 // 0=>LNA ON, 1=>LNA OFF // Power measurement settings #define TM_NUM_MEAS 1 // number of measurements per TDMA #define TM_WIN_MEAS 1 // position of measurement within TDMA // BEACON and TCH settings #define TM_BCCH_ARFCN 80 // beacon #define TM_TCH_ARFCN 62 // TCH arfcn #define TM_MON_ARFCN 33 // monitor arfcn #define TM_CHAN_TYPE TCH_F // channel type #define TM_SUB_CHAN 0 // subchannel number #define TM_SLOT_NUM 4 // TS number #define TM_TSC 5 // Training Sequence #define TM_TXPWR 15 // TXPWR setting #define TM_TXPWR_SKIP 4 #define TM_TA 0 // timing advance setting #define TM_BURST_TYPE 0 // 0=>normal burst, 1=>RACH burst #define TM_BURST_DATA 0 // as defined in TM100.doc: tx_param_write #define TM_PM_ENABLE 1 // Enable power measurements in packet transfer mode // Statistics settings #define TM_NUM_LOOPS 0 // number of times a task is executed, 0 means infinite loop #define TM_AUTO_RESULT_LOOPS 0 // number of loops before stats result is returned, 0 means infinite #define TM_AUTO_RESET_LOOPS 0 // number of loops before stats I/F is reset, 0 means infinite #define TM_STAT_TYPE 1 // type of stats as defined in TM100.doc: stats_read #define TM_STAT_BITMASK 0x6057 // stats bitmaks as defined in TM100.doc: stats_read #if L1_GPRS // Settings for GPRS test mode: #define TM_PDTCH_ARFCN 62 // PDTCH arfcn #define TM_MULTISLOT_CLASS 1 // GPRS multi slot class #define TM_STAT_GPRS_SLOTS 0x80 // Bit mask for RX stats from PDTCH #define TM_RX_ALLOCATION 0x80 // RX slot allocation (bit7->TS0...bit0->TS7) #define TM_RX_CODING_SCHEME 1 // RX coding scheme #define TM_TX_ALLOCATION 0x80 // TX slot allocation (bit7->TS0...bit0->TS7) #define TM_TX_CODING_SCHEME 2 // TX coding scheme #define TM_TXPWR_GPRS 15 // GPRS txpwr level #endif