FreeCalypso > hg > freecalypso-sw
view gsm-fw/g23m-aci/uart/uart_kerp.c @ 1021:8b52011dc66a
doc/Pirelli-Howto: update for the current situation
author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 23 Apr 2016 06:19:09 +0000 |
parents | f54080301c98 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul is part of the entity UART and implements all | functions to handles the incoming primitives as described in | the SDL-documentation (KER-statemachine) +----------------------------------------------------------------------------- */ #ifndef UART_KERP_C #define UART_KERP_C #endif /* !UART_KERP_C */ #include "config.h" #include "fixedconf.h" #include "condat-features.h" #define ENTITY_UART /*==== INCLUDES =============================================================*/ #ifdef WIN32 #include "nucleus.h" #endif /* WIN32 */ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" /* to get a lot of macros */ #include "custom.h" #include "gsm.h" /* to get a lot of macros */ #include "cnf_uart.h" /* to get cnf-definitions */ #include "mon_uart.h" /* to get mon-definitions */ #include "prim.h" /* to get the definitions of used SAP and directions */ #ifdef DTILIB #include "dti.h" /* to get dti lib */ #endif /* DTILIB */ #include "pei.h" /* to get PEI interface */ #ifdef FF_MULTI_PORT #include "gsi.h" /* to get definitions of serial driver */ #else /* FF_MULTI_PORT */ #ifdef _TARGET_ #include "../../serial/serialswitch.h" #include "../../serial/traceswitch.h" #else /* _TARGET_ */ #include "serial_dat.h" /* to get definitions of serial driver */ #endif /* _TARGET_ */ #endif /* FF_MULTI_PORT */ #include "uart.h" /* to get the global entity definitions */ #include "uart_kerf.h" /* to get ker functions */ #include "uart_kers.h" /* to get ker signals */ #include "uart_drxs.h" /* to get drx signals */ #include "uart_dtxs.h" /* to get dtx signals */ #include "uart_rts.h" /* to get rt signals */ #ifdef FF_MULTI_PORT #include "uart_prxs.h" /* to get rx signals */ #include "uart_ptxs.h" /* to get tx signals */ #else /* FF_MULTI_PORT */ #include "uart_rxs.h" /* to get rx signals */ #include "uart_txs.h" /* to get tx signals */ #endif /* FF_MULTI_PORT */ /*==== CONST ================================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : ker_uart_parameters_req +------------------------------------------------------------------------------ | Description : Handles the primitive UART_PARAMETERS_REQ | | Parameters : *uart_parameters_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void ker_uart_parameters_req ( T_UART_PARAMETERS_REQ *uart_parameters_req) { UBYTE i; T_DLC* dlc; TRACE_FUNCTION( "ker_uart_parameters_req" ); #ifdef UART_RANGE_CHECK if(uart_parameters_req EQ NULL) { TRACE_EVENT("ERROR: uart_parameters_req is NULL"); } else if((*((ULONG*)((UBYTE*)uart_parameters_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0) { TRACE_EVENT_P1("ERROR: uart_parameters_req=%08x is not allocated", uart_parameters_req); } else if(uart_parameters_req->device >= UART_INSTANCES) { TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d", uart_parameters_req->device, UART_INSTANCES); } #endif /* UART_RANGE_CHECK */ /* * set UART instance */ uart_data = &uart_data_base[uart_parameters_req->device]; #ifdef FF_MULTI_PORT /* * set new baud rate */ switch (uart_parameters_req->comPar.speed) { case UART_IO_SPEED_AUTO: uart_data->ker.act_dcb.Baud = GSI_BAUD_AUTO; break; case UART_IO_SPEED_75: uart_data->ker.act_dcb.Baud = GSI_BAUD_75; break; case UART_IO_SPEED_150: uart_data->ker.act_dcb.Baud = GSI_BAUD_150; break; case UART_IO_SPEED_300: uart_data->ker.act_dcb.Baud = GSI_BAUD_300; break; case UART_IO_SPEED_600: uart_data->ker.act_dcb.Baud = GSI_BAUD_600; break; case UART_IO_SPEED_1200: uart_data->ker.act_dcb.Baud = GSI_BAUD_1200; break; case UART_IO_SPEED_2400: uart_data->ker.act_dcb.Baud = GSI_BAUD_2400; break; case UART_IO_SPEED_4800: uart_data->ker.act_dcb.Baud = GSI_BAUD_4800; break; case UART_IO_SPEED_7200: uart_data->ker.act_dcb.Baud = GSI_BAUD_7200; break; case UART_IO_SPEED_9600: uart_data->ker.act_dcb.Baud = GSI_BAUD_9600; break; case UART_IO_SPEED_14400: uart_data->ker.act_dcb.Baud = GSI_BAUD_14400; break; case UART_IO_SPEED_19200: uart_data->ker.act_dcb.Baud = GSI_BAUD_19200; break; case UART_IO_SPEED_28800: uart_data->ker.act_dcb.Baud = GSI_BAUD_28800; break; case UART_IO_SPEED_33900: uart_data->ker.act_dcb.Baud = GSI_BAUD_33900; break; case UART_IO_SPEED_38400: uart_data->ker.act_dcb.Baud = GSI_BAUD_38400; break; case UART_IO_SPEED_57600: uart_data->ker.act_dcb.Baud = GSI_BAUD_57600; break; case UART_IO_SPEED_115200: uart_data->ker.act_dcb.Baud = GSI_BAUD_115200; break; case UART_IO_SPEED_203125: uart_data->ker.act_dcb.Baud = GSI_BAUD_203125; break; case UART_IO_SPEED_406250: uart_data->ker.act_dcb.Baud = GSI_BAUD_406250; break; case UART_IO_SPEED_812500: uart_data->ker.act_dcb.Baud = GSI_BAUD_812500; break; case UART_IO_SPEED_UNDEF: /* unchanged */ break; default: TRACE_ERROR( "UART_PARAMETERS_REQ: baudrate unexpected" ); break; } /* * set new bits per character */ switch (uart_parameters_req->comPar.bpc) { case UART_IO_BPC_7: uart_data->ker.act_dcb.DataBits = GSI_CHAR7; break; case UART_IO_BPC_8: uart_data->ker.act_dcb.DataBits = GSI_CHAR8; break; case UART_IO_BPC_UNDEF: /* unchanged */ break; default: TRACE_ERROR( "UART_PARAMETERS_REQ: bpc unexpected" ); break; } /* * set new stop bit */ switch (uart_parameters_req->comPar.nsb) { case UART_IO_SB_1: uart_data->ker.act_dcb.StopBits = GSI_STOP1; break; case UART_IO_SB_2: uart_data->ker.act_dcb.StopBits = GSI_STOP2; break; case UART_IO_SB_UNDEF: /* unchanged */ break; default: TRACE_ERROR( "UART_PARAMETERS_REQ: stop bits unexpected" ); break; } /* * set new parity */ switch (uart_parameters_req->comPar.parity) { case UART_IO_PA_NONE: uart_data->ker.act_dcb.Parity = GSI_PARITYNO; break; case UART_IO_PA_EVEN: uart_data->ker.act_dcb.Parity = GSI_PARITYEVEN; break; case UART_IO_PA_ODD: uart_data->ker.act_dcb.Parity = GSI_PARITYODD; break; case UART_IO_PA_SPACE: uart_data->ker.act_dcb.Parity = GSI_PARITYSPACE; break; case UART_IO_PA_UNDEF: /* unchanged */ break; default: TRACE_ERROR( "UART_PARAMETERS_REQ: parity unexpected" ); break; } /* * set new RX flow control */ switch (uart_parameters_req->comPar.flow_rx) { case UART_IO_FC_RX_NONE: uart_data->ker.act_dcb.RxFlowControl = GSI_FLOWNO; break; case UART_IO_FC_RX_RTS: uart_data->ker.act_dcb.RxFlowControl = GSI_FLOWHW; break; case UART_IO_FC_RX_XOFF: uart_data->ker.act_dcb.RxFlowControl = GSI_FLOWSW; break; case UART_IO_FC_RX_UNDEF: /* unchanged */ break; default: TRACE_ERROR( "UART_PARAMETERS_REQ: RX flow control unexpected" ); break; } /* * set new TX flow control */ switch (uart_parameters_req->comPar.flow_tx) { case UART_IO_FC_TX_NONE: uart_data->ker.act_dcb.TxFlowControl = GSI_FLOWNO; break; case UART_IO_FC_TX_RTS: uart_data->ker.act_dcb.TxFlowControl = GSI_FLOWHW; break; case UART_IO_FC_TX_XOFF: uart_data->ker.act_dcb.TxFlowControl = GSI_FLOWSW; break; case UART_IO_FC_TX_UNDEF: /* unchanged */ break; default: TRACE_ERROR( "UART_PARAMETERS_REQ: TX flow control unexpected" ); break; } /* * set new XON / XOFF values */ if(uart_parameters_req->comPar.xon_valid EQ UART_IO_XON_VALID) uart_data->ker.act_dcb.XON = uart_parameters_req->comPar.xon; if(uart_parameters_req->comPar.xoff_valid EQ UART_IO_XOFF_VALID) uart_data->ker.act_dcb.XOFF = uart_parameters_req->comPar.xoff; #else /* FF_MULTI_PORT */ /* * set new baud rate */ switch (uart_parameters_req->comPar.speed) { case UART_IO_SPEED_AUTO: uart_data->ker.act_br = UF_BAUD_AUTO; break; case UART_IO_SPEED_75: uart_data->ker.act_br = UF_BAUD_75; break; case UART_IO_SPEED_150: uart_data->ker.act_br = UF_BAUD_150; break; case UART_IO_SPEED_300: uart_data->ker.act_br = UF_BAUD_300; break; case UART_IO_SPEED_600: uart_data->ker.act_br = UF_BAUD_600; break; case UART_IO_SPEED_1200: uart_data->ker.act_br = UF_BAUD_1200; break; case UART_IO_SPEED_2400: uart_data->ker.act_br = UF_BAUD_2400; break; case UART_IO_SPEED_4800: uart_data->ker.act_br = UF_BAUD_4800; break; case UART_IO_SPEED_7200: uart_data->ker.act_br = UF_BAUD_7200; break; case UART_IO_SPEED_9600: uart_data->ker.act_br = UF_BAUD_9600; break; case UART_IO_SPEED_14400: uart_data->ker.act_br = UF_BAUD_14400; break; case UART_IO_SPEED_19200: uart_data->ker.act_br = UF_BAUD_19200; break; case UART_IO_SPEED_28800: uart_data->ker.act_br = UF_BAUD_28800; break; case UART_IO_SPEED_33900: uart_data->ker.act_br = UF_BAUD_33900; break; case UART_IO_SPEED_38400: uart_data->ker.act_br = UF_BAUD_38400; break; case UART_IO_SPEED_57600: uart_data->ker.act_br = UF_BAUD_57600; break; case UART_IO_SPEED_115200: uart_data->ker.act_br = UF_BAUD_115200; break; case UART_IO_SPEED_203125: uart_data->ker.act_br = UF_BAUD_203125; break; case UART_IO_SPEED_406250: uart_data->ker.act_br = UF_BAUD_406250; break; case UART_IO_SPEED_812500: uart_data->ker.act_br = UF_BAUD_812500; break; case UART_IO_SPEED_UNDEF: /* unchanged */ break; default: TRACE_ERROR( "UART_PARAMETERS_REQ: baudrate unexpected" ); break; } /* * set new RX flow control */ switch (uart_parameters_req->comPar.flow_rx) { case UART_IO_FC_RX_NONE: uart_data->ker.act_fc_rx = fc_none; break; case UART_IO_FC_RX_RTS: uart_data->ker.act_fc_rx = fc_rts; break; case UART_IO_FC_RX_XOFF: uart_data->ker.act_fc_rx = fc_xoff; break; case UART_IO_FC_RX_UNDEF: /* unchanged */ break; default: TRACE_ERROR( "UART_PARAMETERS_REQ: RX flow control unexpected" ); break; } /* * set new TX flow control */ switch (uart_parameters_req->comPar.flow_tx) { case UART_IO_FC_TX_NONE: uart_data->ker.act_fc_tx = fc_none; break; case UART_IO_FC_TX_RTS: uart_data->ker.act_fc_tx = fc_rts; break; case UART_IO_FC_TX_XOFF: uart_data->ker.act_fc_tx = fc_xoff; break; case UART_IO_FC_TX_UNDEF: /* unchanged */ break; default: TRACE_ERROR( "UART_PARAMETERS_REQ: TX flow control unexpected" ); break; } /* * set new bits per character */ switch (uart_parameters_req->comPar.bpc) { case UART_IO_BPC_7: uart_data->ker.act_bpc = bpc_7; break; case UART_IO_BPC_8: uart_data->ker.act_bpc = bpc_8; break; case UART_IO_BPC_UNDEF: /* unchanged */ break; default: TRACE_ERROR( "UART_PARAMETERS_REQ: bpc unexpected" ); break; } /* * set new stop bit */ switch (uart_parameters_req->comPar.nsb) { case UART_IO_SB_1: uart_data->ker.act_sb = sb_1; break; case UART_IO_SB_2: uart_data->ker.act_sb = sb_2; break; case UART_IO_SB_UNDEF: /* unchanged */ break; default: TRACE_ERROR( "UART_PARAMETERS_REQ: stop bits unexpected" ); break; } /* * set new parity */ switch (uart_parameters_req->comPar.parity) { case UART_IO_PA_NONE: uart_data->ker.act_par = pa_none; break; case UART_IO_PA_EVEN: uart_data->ker.act_par = pa_even; break; case UART_IO_PA_ODD: uart_data->ker.act_par = pa_odd; break; case UART_IO_PA_SPACE: uart_data->ker.act_par = pa_space; break; case UART_IO_PA_UNDEF: /* unchanged */ break; default: TRACE_ERROR( "UART_PARAMETERS_REQ: parity unexpected" ); break; } /* * set new XON / XOFF values */ if(uart_parameters_req->comPar.xon_valid EQ UART_IO_XON_VALID) uart_data->ker.act_xon = uart_parameters_req->comPar.xon; if(uart_parameters_req->comPar.xoff_valid EQ UART_IO_XOFF_VALID) uart_data->ker.act_xoff = uart_parameters_req->comPar.xoff; #endif /* FF_MULTI_PORT */ /* * set new escape detection values */ if(uart_parameters_req->comPar.esc_valid EQ UART_IO_ESC_VALID) { #ifdef FF_MULTI_PORT uart_data->ker.act_dcb.EscChar = uart_parameters_req->comPar.esc_char; uart_data->ker.act_dcb.GuardPeriod = uart_parameters_req->comPar.esc_gp; #else /* FF_MULTI_PORT */ uart_data->ker.act_ec = uart_parameters_req->comPar.esc_char; uart_data->ker.act_gp = uart_parameters_req->comPar.esc_gp; #endif /* FF_MULTI_PORT */ } /* * free the received primitive */ PFREE(uart_parameters_req); switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_READY: /* * flush all still to send data */ uart_data->ker.received_prim|= UART_PARAMETERS_REQ_MASK; uart_data->ker.flush_state = UART_KER_DRX_FLUSH; dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE]; dlc->flushed = FALSE; uart_data->drx = dlc->drx; sig_ker_drx_flush_req(); break; case KER_MUX: case KER_MUX_ESTABLISH: case KER_MUX_DLC_CLOSING: case KER_MUX_CLOSING: case KER_MUX_CLOSED: /* * flush all still to send data */ uart_data->ker.received_prim|= UART_PARAMETERS_REQ_MASK; uart_data->ker.flush_state = UART_KER_DRX_FLUSH; /* * mark all to flush DLCs */ for(i = 0; i < UART_MAX_NUMBER_OF_CHANNELS; i++) { dlc = &uart_data->dlc_table[i]; if((i EQ UART_CONTROL_INSTANCE) || (dlc->connection_state EQ UART_CONNECTION_OPEN)) { dlc->flushed = FALSE; } } /* * initiate flush in all to flushed DLCs */ for(i = 0; i < UART_MAX_NUMBER_OF_CHANNELS; i++) { dlc = &uart_data->dlc_table[i]; if(dlc->flushed NEQ TRUE) { if(i EQ UART_CONTROL_INSTANCE) { if(uart_data->ker.tx_data_desc EQ NULL) sig_any_ker_flushed_ind(UART_CONTROL_INSTANCE); } else { uart_data->drx = dlc->drx; sig_ker_drx_flush_req(); } } } break; case KER_DEAD: /* * set new UART parameters */ ker_setupUart(); #ifdef FF_MULTI_PORT uart_data->ker.act_ec = uart_data->ker.act_dcb.EscChar; uart_data->ker.act_gp = uart_data->ker.act_dcb.GuardPeriod; #endif /* FF_MULTI_PORT */ /* * send confirm primitive */ { PALLOC (uart_parameters_cnf, UART_PARAMETERS_CNF); uart_parameters_cnf->device = uart_data->device; PSEND (hCommMMI, uart_parameters_cnf); } break; default: TRACE_ERROR( "UART_PARAMETERS_REQ unexpected" ); break; } } /* ker_uart_parameters_req() */ /* +------------------------------------------------------------------------------ | Function : ker_uart_dti_req +------------------------------------------------------------------------------ | Description : Handles the primitive UART_DTI_REQ | | Parameters : *uart_dti_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void ker_uart_dti_req ( T_UART_DTI_REQ *uart_dti_req ) { T_DLC* dlc; UBYTE dlc_instance; /* dlc_instance is used as the channel number for dtilib */ #ifdef DTILIB U8 isOK; #else /* DTILIB */ T_HANDLE hCommUPLINK; #endif /* DTILIB */ TRACE_FUNCTION( "ker_uart_dti_req" ); #ifdef UART_RANGE_CHECK if(uart_dti_req EQ NULL) { TRACE_EVENT("ERROR: uart_dti_req is NULL"); } else if((*((ULONG*)((UBYTE*)uart_dti_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0) { TRACE_EVENT_P1("ERROR: uart_dti_req=%08x is not allocated", uart_dti_req); } else if(uart_dti_req->device >= UART_INSTANCES) { TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d", uart_dti_req->device, UART_INSTANCES); } #endif /* UART_RANGE_CHECK */ /* * set UART instance */ uart_data = &uart_data_base[uart_dti_req->device]; switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX: case KER_MUX_DLC_CLOSING: dlc_instance = uart_data->dlc_instance[uart_dti_req->dlci]; break; default: dlc_instance = UART_CONTROL_INSTANCE; break; } dlc = &uart_data->dlc_table[dlc_instance]; /* * close communication channel * if it is already closed, silently discard primitive */ if(dlc->dti_state NEQ DTI_CLOSED) { dti_close( uart_hDTI, uart_data->device, UART_DTI_UP_INTERFACE, dlc_instance, FALSE ); dlc->dti_state = DTI_CLOSED; /* * no reopen */ if (uart_dti_req->dti_conn EQ UART_DISCONNECT_DTI) { PALLOC (uart_dti_cnf, UART_DTI_CNF); uart_data->drx = dlc->drx; uart_data->dtx = dlc->dtx; sig_ker_drx_disconnected_mode_req(); sig_ker_dtx_disconnected_mode_req(); /* * send confirm primitive */ uart_dti_cnf->device = uart_data->device; uart_dti_cnf->dlci = uart_data->dlc_table[dlc_instance].dlci; /* EQ dlci */ uart_dti_cnf->dti_conn = UART_DISCONNECT_DTI; PSEND (hCommMMI, uart_dti_cnf); return; } } #ifdef DTILIB if( GET_STATE( UART_SERVICE_KER ) EQ KER_DEAD ) { /* * set dlc values - this has to happen before * the call of dti_open, because within that call * a callback-function may be called which makes * use of them.. */ dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE]; dlc->drx = &uart_data->drx_base[0]; dlc->dtx = &uart_data->dtx_base[0]; dlc->dlci = 0; uart_data->dlc_instance[0] = UART_CONTROL_INSTANCE; dlc->priority = 0; dlc->lines = 0; } /* * set DTI connection */ dlc->dti_state = DTI_SETUP; uart_data->drx = dlc->drx; uart_data->dtx = dlc->dtx; #endif /* DTILIB */ #ifdef _SIMULATION_ /* * !!! Problem with entity_name which is a pointer in new SAP * !!! therefore we set the peer entity simply to "MMI". * !!! This should be corrected in order to allow test case simulations * !!! with other peer entities. */ #ifdef DTILIB isOK = dti_open( uart_hDTI, uart_data->device, UART_DTI_UP_INTERFACE, dlc_instance, UART_UPLINK_QUEUE_SIZE, uart_dti_req->direction, DTI_QUEUE_UNUSED, DTI_VERSION_10, "MMI", uart_dti_req->link_id ); #else /* DTILIB */ hCommUPLINK = vsi_c_open (VSI_CALLER "MMI"); #endif /* DTILIB */ #else /* _SIMULATION_ */ /* * open new communication channel */ #ifdef DTILIB isOK = dti_open( uart_hDTI, uart_data->device, UART_DTI_UP_INTERFACE, dlc_instance, UART_UPLINK_QUEUE_SIZE, uart_dti_req->direction, DTI_QUEUE_UNUSED, DTI_VERSION_10, (U8*)(uart_dti_req->entity_name), uart_dti_req->link_id ); #else /* DTILIB */ hCommUPLINK = vsi_c_open (VSI_CALLER (char *)(uart_dti_req->entity_name)); #endif /* DTILIB */ #endif /* _SIMULATION_ */ #ifdef DTILIB if(!isOK) /* error?! */ /* * NOTE: internal initialization of the new communication channel * is done in sig_dti_ker_connection_opened() when using DTILIB * * when debugging the below code, please also have a look there!! */ #else /* DTILIB */ uart_data->tui_uart = uart_dti_req->tui_uart; if(hCommUPLINK >= VSI_OK) { PALLOC (uart_dti_cnf, UART_DTI_CNF); /* * send confirm primitive */ uart_dti_cnf->device = uart_data->device; uart_dti_cnf->dlci = uart_dti_req->dlci; uart_dti_cnf->dti_conn = UART_CONNECT_DTI; PSEND (hCommMMI, uart_dti_cnf); /* * initialize new communication channel */ switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_DEAD: SET_STATE( UART_SERVICE_KER, KER_READY ); /* * enable UART */ #ifdef _SIMULATION_ { /* * send DTI_GETDATA_REQ */ PALLOC (dti_getdata_req, DTI2_GETDATA_REQ); dti_getdata_req->tui = 2; /* for enable */ dti_getdata_req->c_id = 0; dti_getdata_req->op_ack = 0; PSEND (hCommMMI, dti_getdata_req); } #else /* _SIMULATION_ */ #ifndef FF_MULTI_PORT if((ret=UF_Enable (uart_data->device, TRUE)) NEQ UF_OK) { TRACE_ERROR_P2("UF Driver: Can't enable UART, [%d], uart_kerp.c(%d)", ret,__LINE__); } #endif /* !FF_MULTI_PORT */ #endif /* _SIMULATION */ /* * set dlc values */ dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE]; dlc->drx = &uart_data->drx_base[0]; dlc->dtx = &uart_data->dtx_base[0]; dlc->dlci = 0; dlc->priority = 0; dlc->lines = 0; /* * set RX and TX in ready mode */ sig_ker_rx_ready_mode_req(); sig_ker_tx_ready_mode_req(); /* * set DTI connection */ dlc->hCommUPLINK = hCommUPLINK; uart_data->drx = dlc->drx; uart_data->dtx = dlc->dtx; sig_ker_drx_ready_mode_req(UART_CONTROL_INSTANCE); sig_ker_dtx_ready_mode_req(UART_CONTROL_INSTANCE); sig_ker_drx_set_dti_peer_req(uart_dti_req->tui_peer, hCommUPLINK, uart_dti_req->c_id); sig_ker_dtx_set_dti_peer_req(uart_dti_req->tui_peer, hCommUPLINK, uart_dti_req->c_id); break; case KER_READY: case KER_MUX: dlc->hCommUPLINK = hCommUPLINK; uart_data->drx = dlc->drx; uart_data->dtx = dlc->dtx; sig_ker_drx_set_dti_peer_req(uart_dti_req->tui_peer, hCommUPLINK, uart_dti_req->c_id); sig_ker_dtx_set_dti_peer_req(uart_dti_req->tui_peer, hCommUPLINK, uart_dti_req->c_id); break; default: TRACE_ERROR( "UART_DTI_REQ unexpected" ); break; } } else /* UPLINK OK */ #endif /* DTILIB */ { /* * send error primitive if communication channel is not opened */ PALLOC (uart_error_ind, UART_ERROR_IND); uart_error_ind->device = uart_data->device; uart_error_ind->dlci = uart_dti_req->dlci; uart_error_ind->error = UART_ERROR_NO_CHANNEL; PSEND (hCommMMI, uart_error_ind); } /* * free the received primitive */ PFREE(uart_dti_req); } /* ker_uart_dti_req() */ /* +------------------------------------------------------------------------------ | Function : ker_uart_disable_req +------------------------------------------------------------------------------ | Description : Handles the primitive UART_DISABLE_REQ | | Parameters : *uart_disable_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void ker_uart_disable_req ( T_UART_DISABLE_REQ *uart_disable_req ) { UBYTE i; T_DLC* dlc; TRACE_FUNCTION( "ker_uart_disable_req" ); #ifdef UART_RANGE_CHECK if(uart_disable_req EQ NULL) { TRACE_EVENT("ERROR: uart_disable_req is NULL"); } else if((*((ULONG*)((UBYTE*)uart_disable_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0) { TRACE_EVENT_P1("ERROR: uart_disable_req=%08x is not allocated", uart_disable_req); } else if(uart_disable_req->device >= UART_INSTANCES) { TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d", uart_disable_req->device, UART_INSTANCES); } #endif /* UART_RANGE_CHECK */ /* * set UART instance */ uart_data = &uart_data_base[uart_disable_req->device]; /* * free the received primitive */ PFREE(uart_disable_req); switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_READY: /* * flush all still to send data */ uart_data->ker.received_prim|= UART_DISABLE_REQ_MASK; uart_data->ker.flush_state = UART_KER_DRX_FLUSH; dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE]; dlc->flushed = FALSE; uart_data->drx = dlc->drx; sig_ker_drx_flush_req(); break; case KER_MUX: case KER_MUX_ESTABLISH: case KER_MUX_DLC_CLOSING: case KER_MUX_CLOSING: case KER_MUX_CLOSED: /* * flush all still to send data */ uart_data->ker.received_prim|= UART_DISABLE_REQ_MASK; uart_data->ker.flush_state = UART_KER_DRX_FLUSH; /* * mark all to flush DLCs */ for(i = 0; i < UART_MAX_NUMBER_OF_CHANNELS; i++) { dlc = &uart_data->dlc_table[i]; if((i EQ UART_CONTROL_INSTANCE) || (dlc->connection_state EQ UART_CONNECTION_OPEN)) { dlc->flushed = FALSE; } } /* * initiate flush in all to flushed DLCs */ for(i = 0; i < UART_MAX_NUMBER_OF_CHANNELS; i++) { dlc = &uart_data->dlc_table[i]; if(dlc->flushed NEQ TRUE) { if(i EQ UART_CONTROL_INSTANCE) { if(uart_data->ker.tx_data_desc EQ NULL) sig_any_ker_flushed_ind(UART_CONTROL_INSTANCE); } else { uart_data->drx = dlc->drx; sig_ker_drx_flush_req(); } } } break; case KER_DEAD: /* * send confirm primitive */ { PALLOC (uart_disable_cnf, UART_DISABLE_CNF); uart_disable_cnf->device = uart_data->device; PSEND (hCommMMI, uart_disable_cnf); } break; default: TRACE_ERROR( "UART_DISABLE_REQ unexpected" ); break; } } /* ker_uart_disable_req() */ /* +------------------------------------------------------------------------------ | Function : ker_uart_ring_req +------------------------------------------------------------------------------ | Description : Handles the primitive UART_RING_REQ | | Parameters : *uart_ring_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void ker_uart_ring_req ( T_UART_RING_REQ *uart_ring_req ) { T_DLC* dlc; TRACE_FUNCTION( "ker_uart_ring_req" ); #ifdef UART_RANGE_CHECK if(uart_ring_req EQ NULL) { TRACE_EVENT("ERROR: uart_ring_req is NULL"); } else if((*((ULONG*)((UBYTE*)uart_ring_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0) { TRACE_EVENT_P1("ERROR: uart_ring_req=%08x is not allocated", uart_ring_req); } else if(uart_ring_req->device >= UART_INSTANCES) { TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d", uart_ring_req->device, UART_INSTANCES); } #endif /* UART_RANGE_CHECK */ /* * set UART instance */ uart_data = &uart_data_base[uart_ring_req->device]; /* * set DLC instance */ if((GET_STATE( UART_SERVICE_KER )) EQ KER_READY) dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE]; else dlc = &uart_data->dlc_table[uart_data-> dlc_instance[uart_ring_req->dlci]]; /* * store new line states */ if(uart_ring_req->line_state EQ UART_LINE_ON) { TRACE_EVENT_P1("RING: on - DLCI=%d", uart_ring_req->dlci); dlc->lines|= UART_RI_MASK; } else { TRACE_EVENT_P1("RING: off - DLCI=%d", uart_ring_req->dlci); dlc->lines&= ~(UART_RI_MASK); } /* * free the received primitive */ PFREE(uart_ring_req); switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_READY: case KER_MUX: /* * flush all still to send data */ dlc->received_prim |= UART_RING_REQ_MASK; uart_data->ker.flush_state = UART_KER_DRX_FLUSH; dlc->flushed = FALSE; uart_data->drx = dlc->drx; sig_ker_drx_flush_req(); break; default: TRACE_ERROR( "UART_RING_REQ unexpected" ); break; } } /* ker_uart_ring_req() */ /* +------------------------------------------------------------------------------ | Function : ker_uart_dcd_req +------------------------------------------------------------------------------ | Description : Handles the primitive UART_DCD_REQ | | Parameters : *uart_dcd_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void ker_uart_dcd_req ( T_UART_DCD_REQ *uart_dcd_req ) { T_DLC* dlc; TRACE_FUNCTION( "ker_uart_dcd_req" ); #ifdef UART_RANGE_CHECK if(uart_dcd_req EQ NULL) { TRACE_EVENT("ERROR: uart_dcd_req is NULL"); } else if((*((ULONG*)((UBYTE*)uart_dcd_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0) { TRACE_EVENT_P1("ERROR: uart_dcd_req=%08x is not allocated", uart_dcd_req); } else if(uart_dcd_req->device >= UART_INSTANCES) { TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d", uart_dcd_req->device, UART_INSTANCES); } #endif /* UART_RANGE_CHECK */ /* * set UART instance */ uart_data = &uart_data_base[uart_dcd_req->device]; /* * set DLC instance */ if((GET_STATE( UART_SERVICE_KER )) EQ KER_READY) dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE]; else dlc = &uart_data->dlc_table[uart_data-> dlc_instance[uart_dcd_req->dlci]]; /* * store new line states */ if(uart_dcd_req->line_state EQ UART_LINE_ON) { TRACE_EVENT_P1("DCD: on - DLCI=%d", uart_dcd_req->dlci); dlc->lines&= ~(UART_DCD_MASK); } else { TRACE_EVENT_P1("DCD: off - DLCI=%d", uart_dcd_req->dlci); dlc->lines|= UART_DCD_MASK; } /* * free the received primitive */ PFREE(uart_dcd_req); switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_READY: case KER_MUX: /* * flush all still to send data */ dlc->received_prim |= UART_DCD_REQ_MASK; uart_data->ker.flush_state = UART_KER_DRX_FLUSH; dlc->flushed = FALSE; uart_data->drx = dlc->drx; sig_ker_drx_flush_req(); break; default: TRACE_ERROR( "UART_DCD_REQ unexpected" ); break; } } /* ker_uart_dcd_req() */ /* +------------------------------------------------------------------------------ | Function : ker_uart_escape_req +------------------------------------------------------------------------------ | Description : Handles the primitive UART_ESCAPE_REQ | | Parameters : *uart_escape_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void ker_uart_escape_req ( T_UART_ESCAPE_REQ *uart_escape_req ) { TRACE_FUNCTION( "ker_uart_escape_req" ); #ifdef UART_RANGE_CHECK if(uart_escape_req EQ NULL) { TRACE_EVENT("ERROR: uart_escape_req is NULL"); } else if((*((ULONG*)((UBYTE*)uart_escape_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0) { TRACE_EVENT_P1("ERROR: uart_escape_req=%08x is not allocated", uart_escape_req); } else if(uart_escape_req->device >= UART_INSTANCES) { TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d", uart_escape_req->device, UART_INSTANCES); } #endif /* UART_RANGE_CHECK */ /* * set UART instance */ uart_data = &uart_data_base[uart_escape_req->device]; /* * set DLC instance */ /* Following part of code is not required so put under comment ,but may be used * in future */ /* if((GET_STATE( UART_SERVICE_KER )) EQ KER_READY) dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE]; else dlc = &uart_data->dlc_table[uart_data-> dlc_instance[uart_escape_req->dlci]]; */ /* * Send confirmation to ACI */ { PALLOC (uart_escape_cnf, UART_ESCAPE_CNF); uart_escape_cnf->device = uart_escape_req->device; uart_escape_cnf->dlci = uart_escape_req->dlci; PSEND (hCommMMI, uart_escape_cnf); } /* * TODO: Set escape on/off parameter in dtx, * Call UF_SetEscape and handle/stop ongoing * escape sequence detection if required */ /* * free the received primitive */ PFREE(uart_escape_req); switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_READY: case KER_MUX: break; default: TRACE_ERROR( "UART_ESCAPE_REQ unexpected" ); break; } } /* ker_uart_escape_req() */ /* +------------------------------------------------------------------------------ | Function : ker_uart_mux_start_req +------------------------------------------------------------------------------ | Description : Handles the primitive UART_MUX_START_REQ | | Parameters : *uart_mux_start_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void ker_uart_mux_start_req ( T_UART_MUX_START_REQ *uart_mux_start_req ) { T_DLC* dlc; #ifndef _SIMULATION_ USHORT ret; #endif TRACE_FUNCTION( "ker_uart_mux_start_req" ); #ifdef UART_RANGE_CHECK if(uart_mux_start_req EQ NULL) { TRACE_EVENT("ERROR: uart_mux_start_req is NULL"); } else if((*((ULONG*)((UBYTE*)uart_mux_start_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0) { TRACE_EVENT_P1("ERROR: uart_mux_start_req=%08x is not allocated", uart_mux_start_req); } else if(uart_mux_start_req->device >= UART_INSTANCES) { TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d", uart_mux_start_req->device, UART_INSTANCES); } #endif /* UART_RANGE_CHECK */ /* * set UART instance */ uart_data = &uart_data_base[uart_mux_start_req->device]; /* * set parameters */ uart_data->n1 = uart_mux_start_req->n1; uart_data->ker.n2 = uart_mux_start_req->n2; sig_ker_rt_parameters_req(uart_mux_start_req->t1, uart_mux_start_req->t2, uart_mux_start_req->t3); /* * free the received primitive */ PFREE(uart_mux_start_req); switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_READY: /* * flush all still to send data */ uart_data->ker.received_prim|= UART_MUX_START_REQ_MASK; uart_data->ker.flush_state = UART_KER_DRX_FLUSH; dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE]; dlc->flushed = FALSE; uart_data->drx = dlc->drx; sig_ker_drx_flush_req(); break; case KER_DEAD: SET_STATE( UART_SERVICE_KER, KER_MUX_ESTABLISH ); #ifdef _SIMULATION_ { /* * send DTI_GETDATA_REQ */ PALLOC (dti_getdata_req, DTI2_GETDATA_REQ); #ifdef DTI2 dti_getdata_req->link_id = LINK_ENABLE_PORT_1; /* for enable */ #else /* DTI2 */ dti_getdata_req->tui = 2; /* for enable */ dti_getdata_req->c_id = 0; dti_getdata_req->op_ack = 0; #endif /* DTI2 */ PSEND (hCommMMI, dti_getdata_req); } #else /* _SIMULATION_ */ #ifndef FF_MULTI_PORT if((ret = UF_Enable (uart_data->device, TRUE)) NEQ UF_OK) { TRACE_ERROR_P2("UF Driver: Can't enable UART, [%d], uart_kerp.c(%d)", ret,__LINE__); } #endif /* !FF_MULTI_PORT */ #endif /* _SIMULATION */ /* * set RX and TX service in mux mode */ sig_ker_rx_mux_mode_req(); sig_ker_tx_mux_mode_req(); /* * start reception */ MALLOC(uart_data->ker.rx_data_desc, (USHORT)(sizeof(T_desc2) - 1 + uart_data->n1 + 2)); uart_data->ker.rx_data_desc->next = (ULONG)NULL; uart_data->ker.rx_data_desc->len = 0; sig_ker_rx_ready_to_receive_req(uart_data->ker.rx_data_desc, 0, (USHORT)(uart_data->n1 + 2)); /* * start timer */ sig_ker_rt_start_t3_req(); /* * send confirm primitive */ { PALLOC (uart_mux_start_cnf, UART_MUX_START_CNF); uart_mux_start_cnf->device = uart_data->device; PSEND (hCommMMI, uart_mux_start_cnf); } break; default: TRACE_ERROR( "UART_MUX_START_REQ unexpected" ); break; } } /* ker_uart_mux_start_req() */ /* +------------------------------------------------------------------------------ | Function : ker_uart_mux_dlc_establish_res +------------------------------------------------------------------------------ | Description : Handles the primitive UART_MUX_DLC_ESTABLISH_RES | | Parameters : *uart_mux_dlc_establish_res - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void ker_uart_mux_dlc_establish_res ( T_UART_MUX_DLC_ESTABLISH_RES *uart_mux_dlc_establish_res ) { T_desc2* temp_desc; T_DLC* dlc; TRACE_FUNCTION( "uart_mux_dlc_establish_res" ); #ifdef UART_RANGE_CHECK if(uart_mux_dlc_establish_res EQ NULL) { TRACE_EVENT("ERROR: uart_mux_dlc_establish_res is NULL"); } else if((*((ULONG*)((UBYTE*)uart_mux_dlc_establish_res - sizeof(T_PRIM_HEADER) - 8))) NEQ 0) { TRACE_EVENT_P1("ERROR: uart_mux_dlc_establish_res=%08x is not allocated", uart_mux_dlc_establish_res); } else if(uart_mux_dlc_establish_res->device >= UART_INSTANCES) { TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d", uart_mux_dlc_establish_res->device, UART_INSTANCES); } #endif /* UART_RANGE_CHECK */ /* * set UART instance */ uart_data = &uart_data_base[uart_mux_dlc_establish_res->device]; switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX: dlc = &uart_data->dlc_table[uart_data-> dlc_instance[uart_mux_dlc_establish_res->dlci]]; dlc->connection_state = UART_CONNECTION_OPEN; /* * send UA response */ temp_desc = dlc->next_command; dlc->next_command = NULL; ker_mux_send_frame(temp_desc); /* * start Data services */ uart_data->drx = dlc->drx; uart_data->dtx = dlc->dtx; sig_ker_drx_ready_mode_req(uart_data-> dlc_instance[uart_mux_dlc_establish_res->dlci]); sig_ker_dtx_ready_mode_req(uart_data-> dlc_instance[uart_mux_dlc_establish_res->dlci]); break; default: TRACE_ERROR( "UART_MUX_DLC_ESTABLISH_RES unexpected" ); break; } /* * free the received primitive */ PFREE(uart_mux_dlc_establish_res); } /* uart_mux_dlc_establish_res() */ /* +------------------------------------------------------------------------------ | Function : ker_uart_mux_dlc_release_req +------------------------------------------------------------------------------ | Description : Handles the primitive UART_MUX_DLC_RELEASE_REQ | | Parameters : *ker_uart_mux_dlc_release_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void ker_uart_mux_dlc_release_req ( T_UART_MUX_DLC_RELEASE_REQ *uart_mux_dlc_release_req ) { T_desc2* temp_desc; T_DLC* dlc; UBYTE dlc_instance; /* channel */ TRACE_FUNCTION( "ker_uart_mux_dlc_release_req" ); #ifdef UART_RANGE_CHECK if(uart_mux_dlc_release_req EQ NULL) { TRACE_EVENT("ERROR: uart_mux_dlc_release_req is NULL"); } else if((*((ULONG*)((UBYTE*)uart_mux_dlc_release_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0) { TRACE_EVENT_P1("ERROR: uart_mux_dlc_release_req=%08x is not allocated", uart_mux_dlc_release_req); } else if(uart_mux_dlc_release_req->device >= UART_INSTANCES) { TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d", uart_mux_dlc_release_req->device, UART_INSTANCES); } #endif /* UART_RANGE_CHECK */ /* * set UART instance */ uart_data = &uart_data_base[uart_mux_dlc_release_req->device]; switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX: dlc_instance = uart_data->dlc_instance[uart_mux_dlc_release_req->dlci]; dlc = &uart_data->dlc_table[dlc_instance]; /* * close DTI connection */ uart_data->drx = dlc->drx; uart_data->dtx = dlc->dtx; sig_ker_drx_dead_mode_req(); sig_ker_dtx_dead_mode_req(); #ifdef DTILIB if(dlc->dti_state NEQ DTI_CLOSED) { dti_close( uart_hDTI, uart_data->device, UART_DTI_UP_INTERFACE, dlc_instance, FALSE ); dlc->dti_state = DTI_CLOSED; } #else /* DTILIB */ if(dlc->hCommUPLINK NEQ VSI_ERROR) { vsi_c_close (VSI_CALLER dlc->hCommUPLINK); dlc->hCommUPLINK = VSI_ERROR; } #endif /* DTILIB */ switch(dlc->connection_state) { case UART_CONNECTION_SABM_RCVD: /* * negative response for an UART_MUX_DLC_ESTABLISH_IND * send DM response */ temp_desc = dlc->next_command; dlc->next_command = NULL; temp_desc->buffer[UART_OFFSET_CONTROL] = UART_DM_CONTROL_FRAME ;/*lint !e415 access of out-of-bounds pointer*/ ker_mux_send_frame(temp_desc); ker_mux_dlc_release(dlc_instance); break; case UART_CONNECTION_OPEN: dlc->connection_state = UART_CONNECTION_DISC_SENT; ker_send_disc_frame(uart_mux_dlc_release_req->dlci); break; case UART_CONNECTION_DEAD: break; default: TRACE_EVENT_P3("Warning: Unexpected DLC connection state: %d - \ %s(%d)", dlc->connection_state, __FILE__, __LINE__); break; } break; default: TRACE_ERROR( "UART_MUX_DLC_RELEASE_REQ unexpected" ); break; } /* * free the received primitive */ PFREE(uart_mux_dlc_release_req); } /* ker_uart_mux_dlc_release_req() */ /* +------------------------------------------------------------------------------ | Function : ker_uart_mux_sleep_req +------------------------------------------------------------------------------ | Description : Handles the primitive UART_MUX_SLEEP_REQ | | Parameters : *uart_mux_sleep_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void ker_uart_mux_sleep_req ( T_UART_MUX_SLEEP_REQ *uart_mux_sleep_req ) { TRACE_FUNCTION( "uart_mux_sleep_req" ); #ifdef UART_RANGE_CHECK if(uart_mux_sleep_req EQ NULL) { TRACE_EVENT("ERROR: uart_mux_sleep_req is NULL"); } else if((*((ULONG*)((UBYTE*)uart_mux_sleep_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0) { TRACE_EVENT_P1("ERROR: uart_mux_sleep_req=%08x is not allocated", uart_mux_sleep_req); } else if(uart_mux_sleep_req->device >= UART_INSTANCES) { TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d", uart_mux_sleep_req->device, UART_INSTANCES); } #endif /* UART_RANGE_CHECK */ /* * set UART instance */ uart_data = &uart_data_base[uart_mux_sleep_req->device]; /* * Primitive UART_MUX_SLEEP_REQ is not supported */ TRACE_ERROR( "UART_MUX_SLEEP_REQ unexpected" ); /* * free the received primitive */ PFREE(uart_mux_sleep_req); } /* ker_uart_mux_sleep_req() */ /* +------------------------------------------------------------------------------ | Function : ker_uart_mux_wakeup_req +------------------------------------------------------------------------------ | Description : Handles the primitive UART_MUX_WAKEUP_REQ | | Parameters : *uart_mux_wakeup_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void ker_uart_mux_wakeup_req ( T_UART_MUX_WAKEUP_REQ *uart_mux_wakeup_req ) { TRACE_FUNCTION( "ker_uart_mux_wakeup_req" ); #ifdef UART_RANGE_CHECK if(uart_mux_wakeup_req EQ NULL) { TRACE_EVENT("ERROR: uart_mux_wakeup_req is NULL"); } else if((*((ULONG*)((UBYTE*)uart_mux_wakeup_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0) { TRACE_EVENT_P1("ERROR: uart_mux_wakeup_req=%08x is not allocated", uart_mux_wakeup_req); } else if(uart_mux_wakeup_req->device >= UART_INSTANCES) { TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d", uart_mux_wakeup_req->device, UART_INSTANCES); } #endif /* UART_RANGE_CHECK */ /* * set UART instance */ uart_data = &uart_data_base[uart_mux_wakeup_req->device]; /* * Primitive UART_MUX_WAKEUP_REQ is not supported */ TRACE_ERROR( "UART_MUX_WAKEUP_REQ unexpected" ); /* * free the received primitive */ PFREE(uart_mux_wakeup_req); } /* ker_uart_mux_wakeup_req() */ /* +------------------------------------------------------------------------------ | Function : ker_uart_mux_close_req +------------------------------------------------------------------------------ | Description : Handles the primitive UART_MUX_CLOSE_REQ | | Parameters : *uart_mux_close_req - Ptr to primitive payload | +------------------------------------------------------------------------------ */ GLOBAL void ker_uart_mux_close_req ( T_UART_MUX_CLOSE_REQ *uart_mux_close_req ) { UBYTE i; T_DLC* dlc; T_desc2* temp_desc; BOOL continuous; TRACE_FUNCTION( "ker_uart_mux_close_req" ); #ifdef UART_RANGE_CHECK if(uart_mux_close_req EQ NULL) { TRACE_EVENT("ERROR: uart_mux_close_req is NULL"); } else if((*((ULONG*)((UBYTE*)uart_mux_close_req - sizeof(T_PRIM_HEADER) - 8))) NEQ 0) { TRACE_EVENT_P1("ERROR: uart_mux_close_req=%08x is not allocated", uart_mux_close_req); } else if(uart_mux_close_req->device >= UART_INSTANCES) { TRACE_EVENT_P2("ERROR: device=%d is greater than UART_INSTANCES=%d", uart_mux_close_req->device, UART_INSTANCES); } #endif /* UART_RANGE_CHECK */ /* * set UART instance */ uart_data = &uart_data_base[uart_mux_close_req->device]; switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX_ESTABLISH: SET_STATE( UART_SERVICE_KER, KER_MUX_CLOSED ); /* * stop timers and * remove all DLC instances */ ker_mux_close_down(); if(uart_data->ker.tx_data_desc EQ NULL) { uart_data->ker.received_prim|= UART_MUX_CLOSE_REQ_MASK; if(uart_data->ker.flush_state EQ UART_KER_NOT_FLUSHING) { uart_data->ker.flush_state = UART_KER_TX_FLUSH; sig_ker_tx_flush_req(); } } break; case KER_MUX: SET_STATE( UART_SERVICE_KER, KER_MUX_DLC_CLOSING ); /* * close all VSI channels and Data services */ continuous = TRUE; for(i = 0; i <= UART_MAX_NUMBER_OF_CHANNELS; i++) { dlc = &uart_data->dlc_table[i]; /* * close all DLC channels except Control channel */ if(i NEQ UART_CONTROL_INSTANCE) { switch(dlc->connection_state) { case UART_CONNECTION_SABM_RCVD: /* * send DM response */ temp_desc = dlc->next_command; dlc->next_command = NULL; temp_desc->buffer[UART_OFFSET_CONTROL] = UART_DM_CONTROL_FRAME ;/*lint !e415 access of out-of-bounds pointer*/ ker_mux_send_frame(temp_desc); ker_mux_dlc_release(i); break; case UART_CONNECTION_OPEN: dlc->connection_state = UART_CONNECTION_DISC_SENT; ker_send_disc_frame(dlc->dlci); continuous = FALSE; break; case UART_CONNECTION_DISC_SENT: continuous = FALSE; break; case UART_CONNECTION_DEAD: break; default: TRACE_EVENT_P3("Warning: Unexpected DLC connection state: %d - \ %s(%d)",dlc->connection_state,__FILE__, __LINE__); break; } } } if(continuous EQ TRUE) { SET_STATE( UART_SERVICE_KER, KER_MUX_CLOSING ); /* * build and send CLD command frame: */ ker_mux_send_close_down(); /* * start timer */ sig_ker_rt_start_t3_req(); } break; case KER_MUX_DLC_CLOSING: case KER_MUX_CLOSING: case KER_MUX_CLOSED: break; default: TRACE_ERROR( "UART_MUX_CLOSE_REQ unexpected" ); break; } /* * free the received primitive */ PFREE(uart_mux_close_req); } /* ker_uart_mux_close_req() */ #ifdef DTILIB /* +------------------------------------------------------------------------------ | Function : sig_dti_ker_connection_opened_ind +------------------------------------------------------------------------------ | Description : Handles the DTILIB callback call DTI_REASON_CONNECTION_OPENED | | This signal means that a dti connection has been successfully opened. | | Parameter : dlc_instance | +------------------------------------------------------------------------------ */ GLOBAL void sig_dti_ker_connection_opened_ind (UBYTE dlc_instance) { #ifndef _SIMULATION_ USHORT ret; #endif PALLOC (uart_dti_cnf, UART_DTI_CNF); TRACE_FUNCTION( "sig_dti_ker_connection_opened_ind" ); /* * send confirm primitive */ uart_dti_cnf->device = uart_data->device; uart_dti_cnf->dlci = uart_data->dlc_table[dlc_instance].dlci; /* EQ dlci */ uart_dti_cnf->dti_conn = UART_CONNECT_DTI; PSEND (hCommMMI, uart_dti_cnf); /* * initialize new communication channel */ switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_DEAD: SET_STATE( UART_SERVICE_KER, KER_READY ); /* * enable UART */ #ifdef _SIMULATION_ { /* * send DTI_GETDATA_REQ */ PALLOC (dti_getdata_req, DTI2_GETDATA_REQ); #ifdef DTI2 dti_getdata_req->link_id = LINK_ENABLE_PORT_1; /* for enable */ #else /* DTI2 */ dti_getdata_req->tui = 2; /* for enable */ dti_getdata_req->c_id = 0; dti_getdata_req->op_ack = 0; #endif /* DTI2 */ PSEND (hCommMMI, dti_getdata_req); } #else /* _SIMULATION_ */ if((ret = UF_Enable (uart_data->device, TRUE)) NEQ UF_OK) { TRACE_ERROR_P2("UF Driver: Can't enable UART, [%d], uart_kerp.c(%d)", ret,__LINE__); } #endif /* _SIMULATION */ /* * set RX and TX in ready mode */ sig_ker_rx_ready_mode_req(); sig_ker_tx_ready_mode_req(); /* * set DTI connection */ sig_ker_drx_ready_mode_req(UART_CONTROL_INSTANCE); sig_ker_dtx_ready_mode_req(UART_CONTROL_INSTANCE); sig_ker_drx_set_dtilib_peer_req(); sig_ker_dtx_set_dtilib_peer_req(); break; case KER_READY: case KER_MUX: sig_ker_drx_set_dtilib_peer_req(); sig_ker_dtx_set_dtilib_peer_req(); break; default: TRACE_ERROR( "UART_DTI_REQ unexpected" ); break; } } /* sig_dti_ker_connection_opened_ind */ /* +------------------------------------------------------------------------------ | Function : sig_dti_ker_connection_closed_ind +------------------------------------------------------------------------------ | Description : Handles the DTILIB callback call DTI_REASON_CONNECTION_CLOSED | | This signal means that a dti connection has been closed by | the neighbour entity. | | Parameters : dlc_instance - affected dlc instance | +------------------------------------------------------------------------------ */ GLOBAL void sig_dti_ker_connection_closed_ind (U8 dlc_instance) { T_DLC *dlc; TRACE_FUNCTION( "sig_dti_ker_connection_closed_ind" ); /* * set DLC */ dlc = &uart_data->dlc_table[dlc_instance]; uart_data->drx = dlc->drx; uart_data->dtx = dlc->dtx; /* * set DTI connection to closed state * if it is already closed, do nothing */ if(dlc->dti_state NEQ DTI_CLOSED) { dlc->dti_state = DTI_CLOSED; sig_ker_drx_disconnected_mode_req(); sig_ker_dtx_disconnected_mode_req(); /* * inform MMI */ { PALLOC (uart_dti_ind, UART_DTI_IND); uart_dti_ind->device = uart_data->device; uart_dti_ind->dlci = dlc->dlci; uart_dti_ind->dti_conn = UART_DISCONNECT_DTI; PSEND (hCommMMI, uart_dti_ind); } } } /* sig_dti_ker_connection_closed_ind */ #endif /* DTILIB */