FreeCalypso > hg > freecalypso-sw
view gsm-fw/bsp/abb+spi/abb.h @ 687:95608d9c90de
gsm-fw/g23m-gsm/alr/Makefile: link xipcode.o
author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
---|---|
date | Mon, 29 Sep 2014 23:42:53 +0000 |
parents | cc0944d35698 |
children |
line wrap: on
line source
/******************************************************************************/ /* TEXAS INSTRUMENTS INCORPORATED PROPRIETARY INFORMATION */ /* */ /* Property of Texas Instruments -- For Unrestricted Internal Use Only */ /* Unauthorized reproduction and/or distribution is strictly prohibited. This*/ /* product is protected under copyright law and trade secret law as an*/ /* unpublished work. Created 1987, (C) Copyright 1997 Texas Instruments. All*/ /* rights reserved. */ /* */ /* */ /* Filename : abb.h */ /* */ /* Description : Analog BaseBand registers and bits definition. */ /* Functions to drive the ABB device. */ /* The Serial Port Interface is used to connect the TI */ /* Analog BaseBand (ABB). */ /* It is assumed that the ABB is connected as the SPI */ /* device 0. */ /* */ /* Author : Pascal PUEL */ /* */ /* Version number : 1.3 */ /* */ /* Date and time : 08/22/03 */ /* */ /* Previous delta : Creation */ /* */ /******************************************************************************/ #ifndef __ABB_H__ #define __ABB_H__ #include "../../include/config.h" #include "../../include/sys_types.h" #ifndef _WINDOWS /*------------------------------------*/ /* SYREN PG Definition */ /*------------------------------------*/ #if (ANALOG == 3) // SYREN #define S_PG_10 1 #define S_PG_20 2 #endif // (ANALOG == 3) // DEFINITIONS FOR OMEGA/NAUSICA #if (ANALOG == 1) // ABB PAGE #define PAGE0 0x0001 #define PAGE1 0x0002 // ABB REGISTERS //=== PAGE 0 ======= #define PAGEREG (1 << 1) #define APCDEL1 (2 << 1) #define BULDATA1_2 (3 << 1) #define TOGBR1 (4 << 1) #define TOGBR2 (5 << 1) #define VBDCTRL (6 << 1) #define AUXAFC1 (7 << 1) #define AUXAFC2 (8 << 1) #define AUXAPC (9 << 1) #define APCRAM (10 << 1) #define APCOFF (11 << 1) #define AUXDAC (12 << 1) #define MADCCTRL1 (13 << 1) #define MADCCTRL2 (14 << 1) #define VBATREG (15 << 1) #define VCHGREG (16 << 1) #define ICHGREG (17 << 1) #define VBKPREG (18 << 1) #define ADIN1REG (19 << 1) #define ADIN2REG (20 << 1) #define ADIN3REG (21 << 1) #define ADIN4XREG (22 << 1) #define ADIN5YREG (23 << 1) #define MADCSTAT (24 << 1) #define CHGREG (25 << 1) #define ITMASK (26 << 1) #define ITSTATREG (27 << 1) #define BCICTL1 (28 << 1) #define BCICTL2 (29 << 1) #define VRPCCTL2 (30 << 1) #define VRPCSTS (31 << 1) //=== PAGE 1 ======= #define PAGEREG (1 << 1) #define BULIOFF (2 << 1) #define BULQOFF (3 << 1) #define BULQDAC (4 << 1) #define BULIDAC (5 << 1) #define BBCTRL (6 << 1) #define VBUCTRL (7 << 1) #define VBCTRL (8 << 1) #define PWDNRG (9 << 1) #define TSC_TIMER (10 << 1) #define VRPCCTRL3 (11 << 1) #define APCOUT (12 << 1) #define VRPCBGT (18 << 1) #define TAPCTRL (19 << 1) #define TAPREG (20 << 1) #define AFCCTLADD (21 << 1) #define AFCOUT (22 << 1) #define VRPCCTRL1 (23 << 1) #define VRPCCTRL4 (24 << 1) #define APCDEL2 (26 << 1) #define ITSTATREG (27 << 1) // Registers bit definitions // ABB device bits definition of register VBCTRL #define VDLAUX 0x001 #define VDLEAR 0x002 #define VBUZ 0x004 #define VULSWITCH 0x008 #define MICBIAS 0x010 #define VALOOP 0x020 #define VCLKMODE 0x040 #define VSYNC 0x080 #define VBDFAUXG 0x100 #define VFBYP 0x200 // ABB device bits definition of register VBUCTRL #define DXEN 0x200 // ABB device bits definition of register VRPCSTS #define ONBSTS 0x01 // ON Button push flag #define ONRSTS 0x02 // Remote ON flag #define ITWSTS 0x04 // Wake-up IT flag #define CHGSTS 0x08 // Charger plug flag #define ONREFLT 0x10 // ON Button current state #define ORMRFLT 0x20 // Remote ON current state #define CHGPRES 0x40 // Charger plug current state // ABB device bits definition of register ITSTATREG #define REMOT_IT_STS 0x02 #define PUSHOFF_IT_STS 0x04 #define CHARGER_IT_STS 0x08 #define ADCEND_IT_STS 0x20 // On Nausica, if the PWR key is pressed, the bit is set, and cleared when released #define PWR_OFF_KEY_PRESSED (ONREFLT) // ABB ADC Interrupts #define EOC_INTENA 0x03DF #define EOC_INTMASK 0x0020 // ABB ADC CHANNELS #define VBATCV 0x0001 #define VCHGCV 0x0002 #define ICHGCV 0x0004 #define VBKPCV 0x0008 #define ADIN1CV 0x0010 #define ADIN2CV 0x0020 #define ADIN3CV 0x0040 #define vADIN4XCV 0x0080 #define ADIN5XCV 0x0100 #define ALL 0x01FF #define NONE 0x0000 // ABB MODULES #define MADC 0x8000 #define AFC 0x2000 #define ADAC 0x0800 #define DCDC 0x0080 #define ALLOFF 0x0000 // Definitions of OMEGA test modes for baseband windows #define TSPTEST1 0x001d #define TSPTEST2 0x001e #define AFCTEST 0x0010 #define AFCNORM 0x0000 // DEFINITIONS FOR IOTA #elif (ANALOG == 2) // ABB PAGE #define PAGE0 0x0001 #define PAGE1 0x0002 #define PAGE2 0x0010 // ABB REGISTERS //=== PAGE 0 ======= #define PAGEREG (1 << 1) #define APCDEL1 (2 << 1) #define BULDATA1_2 (3 << 1) #define TOGBR1 (4 << 1) #define TOGBR2 (5 << 1) #define VBDCTRL (6 << 1) #define AUXAFC1 (7 << 1) #define AUXAFC2 (8 << 1) #define AUXAPC (9 << 1) #define APCRAM (10 << 1) #define APCOFF (11 << 1) #define AUXDAC (12 << 1) #define MADCCTRL (13 << 1) #define VBATREG (15 << 1) #define VCHGREG (16 << 1) #define ICHGREG (17 << 1) #define VBKPREG (18 << 1) #define ADIN1REG (19 << 1) #define ADIN2REG (20 << 1) #define ADIN3REG (21 << 1) #define ADIN4REG (22 << 1) #define MADCSTAT (24 << 1) #define CHGREG (25 << 1) #define ITMASK (26 << 1) #define ITSTATREG (27 << 1) #define BCICTL1 (28 << 1) #define BCICTL2 (29 << 1) #define VRPCDEV (30 << 1) #define VRPCSTS (31 << 1) //=== PAGE 1 ======= #define PAGEREG (1 << 1) #define BULIOFF (2 << 1) #define BULQOFF (3 << 1) #define BULQDAC (4 << 1) #define BULIDAC (5 << 1) #define BBCTRL (6 << 1) #define VBUCTRL (7 << 1) #define VBCTRL1 (8 << 1) #define PWDNRG (9 << 1) #define VBPOP (10 << 1) #define VBCTRL2 (11 << 1) #define APCOUT (12 << 1) #define BCICONF (13 << 1) #define BULGCAL (14 << 1) #define TAPCTRL (19 << 1) #define TAPREG (20 << 1) #define AFCCTLADD (21 << 1) #define AFCOUT (22 << 1) #define VRPCSIM (23 << 1) #define AUXLED (24 << 1) #define APCDEL2 (26 << 1) #define ITSTATREG (27 << 1) #define VRPCMSKABB (29 << 1) #define VRPCCFG (30 << 1) #define VRPCMSK (31 << 1) // Registers bit definitions // ABB device bits definition of register VBCTRL1 #define VDLAUX 0x001 #define VDLEAR 0x002 #define VBUZ 0x004 #define VULSWITCH 0x008 #define MICBIAS 0x010 #define VALOOP 0x020 #define VCLKMODE 0x040 #define VSYNC 0x080 #define VBDFAUXG 0x100 #define VFBYP 0x200 // ABB device bits definition of register VBCTRL2 #define MICBIASEL 0x001 #define VDLHSO 0x002 #define MICNAUX 0x004 // ABB device bits definition of register VBUCTRL #define DXEN 0x200 // ABB device bits definition of register VBPOP #define HSODIS 0x001 #define HSOCHG 0x002 #define HSOAUTO 0x004 #define EARDIS 0x008 #define EARCHG 0x010 #define EARAUTO 0x020 #define AUXDIS 0x040 #define AUXCHG 0x080 #define AUXAUTO 0x100 // ABB device bits definition of register VRPCSTS #define ONBSTS 0x01 // ON Button push flag #define ONRSTS 0x02 // Remote ON flag #define ITWSTS 0x04 // Wake-up IT flag #define CHGSTS 0x08 // Charger plug flag #define ONREFLT 0x10 // ON Button current state #define ORMRFLT 0x20 // Remote ON current state #define CHGPRES 0x40 // Charger plug current state // ABB device bits definition of register ITSTATREG #define REMOT_IT_STS 0x02 #define PUSHOFF_IT_STS 0x04 #define CHARGER_IT_STS 0x08 #define ADCEND_IT_STS 0x20 // On Iota, the bit is set when the key is released and set when the key is pressed #define PWR_OFF_KEY_PRESSED (0) // ABB ADC Interrupts #define EOC_INTENA 0x03DF #define EOC_INTMASK 0x0020 // ABB ADC CHANNELS #define VBATCV 0x0001 #define VCHGCV 0x0002 #define ICHGCV 0x0004 #define VBKPCV 0x0008 #define ADIN1CV 0x0010 #define ADIN2CV 0x0020 #define ADIN3CV 0x0040 #define ADIN4CV 0x0080 #define ALL 0x00FF #define NONE 0x0000 // ABB MODULES #define MADC 0x8000 #define AFC 0x2000 #define ADAC 0x0800 #define DCDC 0x0080 #define ALLOFF 0x0000 // Definitions of IOTA test modes #define TSPTEST1 0x001d #define TSPTEST2 0x001e #define AFCTEST 0x0010 #define AFCNORM 0x0000 // Definition for IOTA test modes #define TSPEN 0x001a #define MADCTEST 0x0012 #define TSPADC 0x0015 #define TSPUP 0x0017 #define TSPDN 0x0018 // Definition for IOTA Power Management //The duration of the SLPDLY counter must be greater than the process execution time: //DBB deep sleep routine included the IT check = DBB sleep routine and IT check //+ the seven 32Khz clock cycle interval needed to ABB in order to make effective the sleep abort write access in VRPCDEV ++ // register -> 7*T32Khz = = ABB IBIC propagation delay //+ 150us of short asynchronous wake-up time (approximately 4*T32Khz) = ULPD short sleep where Syren/IOTA aborts sleep and // write DEVSLEEP = 0 #define SLPDLY 0x001F // delay to set IOTA in sleep mode (unit: 20*T32Khz) #define MASK_SLEEP_MODE 0x0000 // set the regulators in low consumption in sleep mode // DEFINITIONS FOR SYREN #elif (ANALOG == 3) // ABB PAGE #define PAGE0 0x0001 #define PAGE1 0x0002 #define PAGE2 0x0010 // ABB REGISTERS //=== PAGE 0 ======= #define PAGEREG (1 << 1) #define APCDEL1 (2 << 1) #define BULDATA1_2 (3 << 1) #define TOGBR1 (4 << 1) #define TOGBR2 (5 << 1) #define VBDCTRL (6 << 1) #define AUXAFC1 (7 << 1) #define AUXAFC2 (8 << 1) #define AUXAPC (9 << 1) #define APCRAM (10 << 1) #define APCOFF (11 << 1) #define AUXDAC (12 << 1) #define MADCCTRL (13 << 1) #define CHGIREG (14 << 1) #define VBATREG (15 << 1) #define VCHGREG (16 << 1) #define ICHGREG (17 << 1) #define VBKPREG (18 << 1) #define ADIN1REG (19 << 1) #define ADIN2REG (20 << 1) #define ADIN3REG (21 << 1) #define ADIN4REG (22 << 1) #define ADIN5REG (23 << 1) #define MADCSTAT (24 << 1) #define CHGVREG (25 << 1) #define ITMASK (26 << 1) #define ITSTATREG (27 << 1) #define BCICTL1 (28 << 1) #define BCICTL2 (29 << 1) #define VRPCDEV (30 << 1) #define VRPCSTS (31 << 1) //=== PAGE 1 ======= #define PAGEREG (1 << 1) #define BULIOFF (2 << 1) #define BULQOFF (3 << 1) #define BULQDAC (4 << 1) #define BULIDAC (5 << 1) #define BBCTRL (6 << 1) #define VBUCTRL (7 << 1) #define VBCTRL1 (8 << 1) #define PWDNRG (9 << 1) #define VBPOP (10 << 1) #define VBCTRL2 (11 << 1) #define APCOUT (12 << 1) #define BCICONF (13 << 1) #define BULGCAL (14 << 1) #define VAUDCTRL (15 << 1) #define VAUSCTRL (16 << 1) #define VAUOCTRL (17 << 1) #define VAUDPLL (18 << 1) #define TAPCTRL (19 << 1) #define TAPREG (20 << 1) #define AFCCTLADD (21 << 1) #define AFCOUT (22 << 1) #define VRPCSIMR (23 << 1) #define BCIWDOG (24 << 1) #define NONE8 (25 << 1) #define APCDEL2 (26 << 1) #define ITSTATREG (27 << 1) #if (ANLG_PG == S_PG_20) // SYREN PG2.0 ON EVACONSO #define BBCFG (28 << 1) #else #define NONE9 (28 << 1) #endif #define VRPCMSKOFF (29 << 1) #define VRPCCFG (30 << 1) #define VRPCMSKSLP (31 << 1) //=== PAGE 2 ======= #if (ANLG_PG == S_PG_10) // SYREN PG1.0 ON ESAMPLE #define BBCFG (5 << 1) #endif #define VRPCABBTST (25 << 1) #define VRPCAUX (30 << 1) #define VRPCLDO (31 << 1) /* INSERT HERE OTHER DEVICES REGISTERS */ // Registers bit definitions /*** SYREN internal control bits ***/ /** For reg. VBCTRL1 **/ #define VULSWITCH 0x008 #define MICBIAS 0x010 #define VALOOP 0x020 #define VCLKMODE 0x040 #define VSYNC 0x080 #define VBDFAUXG 0x100 #define VFBYP 0x200 /** For reg. VBCTRL2 **/ #define HSMICSEL 0x001 #define MICBIASEL 0x004 #define SPKG 0x008 #define HSOVMID 0x010 #define HSDIF 0x020 /** For reg. VBUCTRL **/ #define DXEN 0x200 /** For reg. VBPOP **/ #define HSODIS 0x001 #define HSOCHG 0x002 #define HSOAUTO 0x004 #define EARDIS 0x008 #define EARCHG 0x010 #define EARAUTO 0x020 #define AUXFDIS 0x040 #define AUXAUTO 0x080 #define AUXFBYP 0x200 // ABB device bits definition of register VRPCCFG #define PWOND 0x20 // ON Button current state #define CHGPRES 0x40 // ABB device bits definition of register ITSTATREG #define REMOT_IT_STS 0x02 #define PUSHOFF_IT_STS 0x04 #define CHARGER_IT_STS 0x08 #define ADCEND_IT_STS 0x20 // ABB device bits definition of register VRPCSTS #define ITWSTS 0x10 // Wake-up IT flag #define PWONBSTS 0x20 // ON Button push flag #define CHGSTS 0x40 // Charger plug flag #define RPSTS 0x100 // Remote ON flag // ABB ADC Interrupts #define EOC_INTENA 0x03DF #define EOC_INTMASK 0x0020 // ABB ADC CHANNELS (reg. MADCCTRL) #define VBATCV 0x0001 #define VCHGCV 0x0002 #define ICHGCV 0x0004 #define VBKPCV 0x0008 #define ADIN1CV 0x0010 #define ADIN2CV 0x0020 #define ADIN3CV 0x0040 #define ADIN4CV 0x0080 #define ADIN5CV 0x0100 #define ALL 0x01FF #define NONE 0x0000 // ABB MODULES #define MADC 0x8000 #define AFC 0x2000 #define ADAC 0x0800 #define DCDC 0x0080 #define ALLOFF 0x0000 // Definitions of SYREN test modes #define TSPTEST1 0x001d #define TSPTEST2 0x001e #define AFCTEST 0x0010 #define AFCNORM 0x0000 #define TSPEN 0x001a #define MADCTEST 0x0012 #define TSPADC 0x0015 #define TSPUP 0x0017 #define TSPDN 0x0018 // Definition for SYREN Power Management //The duration of the SLPDLY counter must be greater than the process execution time: //DBB deep sleep routine included the IT check = DBB sleep routine and IT check //+ the seven 32Khz clock cycle interval needed to ABB in order to make effective the sleep abort write access in VRPCDEV ++ // register -> 7*T32Khz = = ABB IBIC propagation delay //+ 150us of short asynchronous wake-up time (approximately 4*T32Khz) = ULPD short sleep where Syren/IOTA aborts sleep and // write DEVSLEEP = 0 #define SLPDLY 0x001F // delay to set SYREN in sleep mode (unit: 20*T32Khz) #define MASK_SLEEP_MODE 0x0000 // set the regulators in low consumption in sleep mode #define LOCORE_SLEEP 0x01 #define NORMAL_SLEEP 0x00 #define MAIN_BG 0x01, #define SLEEP_BG 0x00 #endif // ANALOG == 1,2,3 // Define the level of semaphore protection for all accesses to the ABB // 0 for no protection // 1 for protection low // 2 for protection medium // 3 for protection high #if (OP_L1_STANDALONE == 1) #define ABB_SEMAPHORE_PROTECTION (0) #else #define ABB_SEMAPHORE_PROTECTION (1) #endif // PROTOTYPES #if (ABB_SEMAPHORE_PROTECTION) void ABB_Sem_Create(void); #endif void ABB_Wait_IBIC_Access(void); void ABB_Write_Register_on_page(SYS_UWORD16 page, SYS_UWORD16 reg_id, SYS_UWORD16 value); SYS_UWORD16 ABB_Read_Register_on_page(SYS_UWORD16 page, SYS_UWORD16 reg_id); void ABB_free_13M(void); void ABB_stop_13M(void); SYS_UWORD16 ABB_Read_Status(void); void ABB_Conf_ADC(SYS_UWORD16 Channels, SYS_UWORD16 ItVal); void ABB_Read_ADC(SYS_UWORD16 *Buff); void ABB_on(SYS_UWORD16 modules, SYS_UWORD8 bRecoveryFlag); SYS_UWORD32 ABB_sleep(SYS_UWORD8 sleep_performed, SYS_WORD16 afc); void ABB_wakeup(SYS_UWORD8 sleep_performed, SYS_WORD16 afc); void ABB_wa_VRPC(SYS_UWORD16 value); void ABB_Write_Uplink_Data(SYS_UWORD16 *TM_ul_data); #if (OP_L1_STANDALONE == 0) void ABB_Power_Off(void); #endif #if (ANALOG ==3) void Syren_Sleep_Config(SYS_UWORD16 sleep_type,SYS_UWORD16 bg_select, SYS_UWORD16 sleep_delay); #endif #else // _WINDOWS // DEFINITIONS FOR IOTA // ABB PAGE #define PAGE0 0x0001 #define PAGE1 0x0002 #define PAGE2 0x0010 // ABB REGISTERS //=== PAGE 0 ======= #define PAGEREG (1 << 1) #define APCDEL1 (2 << 1) #define BULDATA1_2 (3 << 1) #define TOGBR1 (4 << 1) #define TOGBR2 (5 << 1) #define VBDCTRL (6 << 1) #define AUXAFC1 (7 << 1) #define AUXAFC2 (8 << 1) #define AUXAPC (9 << 1) #define APCRAM (10 << 1) #define APCOFF (11 << 1) #define AUXDAC (12 << 1) #define MADCCTRL (13 << 1) #define VBATREG (15 << 1) #define VCHGREG (16 << 1) #define ICHGREG (17 << 1) #define VBKPREG (18 << 1) #define ADIN1REG (19 << 1) #define ADIN2REG (20 << 1) #define ADIN3REG (21 << 1) #define ADIN4REG (22 << 1) #define MADCSTAT (24 << 1) #define CHGREG (25 << 1) #define ITMASK (26 << 1) #define ITSTATREG (27 << 1) #define BCICTL1 (28 << 1) #define BCICTL2 (29 << 1) #define VRPCDEV (30 << 1) #define VRPCSTS (31 << 1) //=== PAGE 1 ======= #define PAGEREG (1 << 1) #define BULIOFF (2 << 1) #define BULQOFF (3 << 1) #define BULQDAC (4 << 1) #define BULIDAC (5 << 1) #define BBCTRL (6 << 1) #define VBUCTRL (7 << 1) #define VBCTRL1 (8 << 1) #define PWDNRG (9 << 1) #define VBPOP (10 << 1) #define VBCTRL2 (11 << 1) #define APCOUT (12 << 1) #define BCICONF (13 << 1) #define BULGCAL (14 << 1) #define TAPCTRL (19 << 1) #define TAPREG (20 << 1) #define AFCCTLADD (21 << 1) #define AFCOUT (22 << 1) #define VRPCSIM (23 << 1) #define AUXLED (24 << 1) #define APCDEL2 (26 << 1) #define ITSTATREG (27 << 1) #define VRPCMSKABB (29 << 1) #define VRPCCFG (30 << 1) #define VRPCMSK (31 << 1) // ABB device bits definition of register VBUCTRL #define DXEN 0x200 // ABB device bits definition of register VRPCSTS #define ONBSTS 0x01 // ON Button push flag #define ONRSTS 0x02 // Remote ON flag #define ITWSTS 0x04 // Wake-up IT flag #define CHGSTS 0x08 // Charger plug flag #define ONREFLT 0x10 // ON Button current state #define ORMRFLT 0x20 // Remote ON current state #define CHGPRES 0x40 // Charger plug current state // ABB device bits definition of register ITSTATREG #define REMOT_IT_STS 0x02 #define PUSHOFF_IT_STS 0x04 #define CHARGER_IT_STS 0x08 #define ADCEND_IT_STS 0x20 // PROTOTYPES void ABB_Write_Register_on_page(SYS_UWORD16 page, SYS_UWORD16 reg_id, SYS_UWORD32 value); SYS_UWORD16 ABB_Read_Register_on_page(SYS_UWORD16 page, SYS_UWORD16 reg_id); SYS_UWORD16 ABB_Read_Status(void); void ABB_Conf_ADC(SYS_UWORD16 Channels, SYS_UWORD16 ItVal); void ABB_Read_ADC(SYS_UWORD16 *Buff); #endif // _WINDOWS #endif // __ABB_H__