FreeCalypso > hg > freecalypso-sw
view gsm-fw/ccd/README @ 654:95c433d8c274
gsm-fw/cdg: LoCosto version of cdginc regenerated
author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
---|---|
date | Thu, 25 Sep 2014 09:46:42 +0000 |
parents | 042735181793 |
children | c36fe9d1da7e |
line wrap: on
line source
CCD (Condat Coder and Decoder) is yet another component needed in order to produce a functional GSM/GPRS MS (mobile station) firmware image based on the TI/Condat architecture. We got the C source for this component from the LoCosto find. CCD code that went into TI's firmware builds (as opposed to TI/Condat's Windows-based tools etc) has two subdivisions: 1. The main CCD library - ccd_na7_db.lib in the case of our Leonardo reference firmware. The C modules compiled into this library must be very independent, as it's one of the "frozen" GPF libs - it appears that GPF was maintained by a separate group inside TI, and the builders of actual GSM/GPRS firmwares used that group's GPF (and CCD) binary lib deliverables as untouched blobs. 2. The ccddata component is meant to be compiled as part of the product firmware build process, in both TCS211 and LoCosto versions. Our Leonardo reference version has it in a binary lib too, but it's one of those "unprivileged customer" libs, and one can see from the makefiles that it was meant to be compiled the same way as L1 and L23 etc. The LoCosto version came with the full source for all of CCD, but the build system is set up to only compile ccddata, whereas the rest of CCD is used in the form of an imported GPF binary lib, just like GPF proper, just like in TCS211. It appears, however, that the C source for both above-listed parts of CCD has always been maintained in a single directory, and that is how it appears in the LoCosto find. For our use in FreeCalypso we shall compile all of CCD (both subdivisions) into a single library in this directory - in this project we always compile everything from source anyway, so we may as well simplify the build process in this regard.