FreeCalypso > hg > freecalypso-sw
view gsm-fw/riviera/tests/rv/rv_test_cfg.h @ 871:a5c8f48003cd
rvinterf: client programs can now selectively stop receiving packets of a
particular RVTMUX type
author | Space Falcon <falcon@ivan.Harhan.ORG> |
---|---|
date | Fri, 29 May 2015 06:29:38 +0000 |
parents | afceeeb2cba1 |
children |
line wrap: on
line source
/** * @file rv_test_cfg.h * * This file allows to set parameters used to perform tests. * * Parameters to set are: * - TEST_INIT (to set parameters statically or dynamically) * - TEST_TYPE * - TEST_LEVEL * - TEST_NUMBER * - TEST_CFG (non regression) * - TEST_TABLE (non regression) * - NB_OF_TEST_TO_PASS (non regression) * - TEST_OCC (non regression) * * It is also possible to set bd_addr used for the tests by * setting BD_ADDR_LOC and BD_ADDR_REM values at the end of this file. * * IMPORTANT: Copy contents of rv_test_cfg_template.h * file into this file before building. * * @author Cedric Baudelet * @author Vincent Oberle */ #ifndef _RV_TEST_CFG_H_ #define _RV_TEST_CFG_H_ #include "rv_test_regr.h" /** * * Define TEST_INIT parameter. * * TEST_INIT parameter's available values are: * * -> COMP: Set testing parameters statically during compilation using * rv_test_cfg file. * -> EXEC: Set testing parameters dynamically during execution using LCD * and keypad. * */ #define TEST_INIT (EXEC) /* * Only with TEST_INIT = COMP * -------------------------- */ /** * * Define TEST_TYPE parameter. * * TEST_TYPE parameter's available values are: * * -> REGR: Execute NON REGRESSION tests. * -> CERTIF: Execute CERTIFICATION tests. * -> DEMO: Execute DEMONSTRATION events. * -> MISC: Execute MISCELLANEOUS tests. * -> UPF4: Execute UPF4 tests. * */ #define TEST_TYPE (MISC) /** * * Define TEST_LEVEL parameter. * * TEST_LEVEL parameter is TEST_XXX_SWE, where XXX can take one of the * following values: * * REGR: * | L2CAP RFCOMM SPP SDP SDAP ATP * | HS OBX OPP EXPL FFS SYN * | DAR PWR TUT * |______________________________________________________________ * * CERTIF: * | L2CAP SDP SPP * |______________________________________________________________ * * DEMO: * | HS EXPL RNET TUT R2D * |______________________________________________________________ * * MISC: * | BTE SDP HCI SPP BTCTRL DUN_GW * | ATP TCS FFS BMI SCM * | RTC AUDIO R2D KPD TUT MKS * | RGUI RNET UVM MSME * |______________________________________________________________ * * UPF4: * | L2CAP RFCOMM SDP SPP BTCTRL DUN_GW * | OPP FAX_GW * |______________________________________________________________ * */ #define TEST_LEVEL (TEST_MSME_SWE) /** * * Define TEST_NUMBER parameter. * * This parameter should not be used with REGR TEST_TYPE (except if * TEST_TABLE[] = {TEST_NUMBER, CONFIG_X, EOL}. * */ #define TEST_NUMBER (5) /* * Only with TEST_MISC = REGR * -------------------------- */ /** * * Define TEST_CFG parameter. * * TEST_CFG parameter's available values are: * * -> TEST_LIST: Execute all scenarios from TEST_TABLE[] sequentially. * -> TEST_LIST_RAND: Execute NB_OF_TEST_TO_PASS scenarios from TEST_TABLE[] randomly. * -> TEST_ALL: Execute all the scenarios sequentially using the two * regression configurations (CONFIG_A and CONFIG_B). * -> TEST_ALL_RAND: Execute NB_OF_TEST_TO_PASS scenarios randomly using the * two regression configurations (CONFIG_A and CONFIG_B). * * Note: * If TEST_INIT = EXEC, test_cfg parameter (defined in rv_test.c file) is * automatically set to TEST_ALL_RAND value. * */ #define TEST_CFG (TEST_ALL_RAND) /** * * Define TEST_TABLE parameter. * * T_RV_REGR_TEST_LIST type is: * -> T_RV_REGR_TEST_LIST_NBR: Scenario number. * -> T_RV_REGR_TEST_LIST_CFG: Test configuration (CONFIG_A or CONFIG_B) * * Note: * TEST_TABLE MUST contain EOL flag as its last element. * */ static const T_RV_REGR_TEST_LIST TEST_TABLE[] = {TEST_NUMBER, CONFIG_A, TEST_NUMBER, CONFIG_B, EOL}; /** * * Define NB_OF_TEST_TO_PASS parameter. * * This parameter is only used with REGR TEST_TYPE when TEST_CFG parameter is * set to TEST_LIST_RAND or TEST_ALL RAND. Else not used. * */ #define NB_OF_TEST_TO_PASS (1) /** * * Define TEST_OCC parameter. * * This parameter defines the number of occurence for each test. * * Note: * This parameter can't be set dynamically. * */ #define TEST_OCC (1) /* * Only with TEST LEVEL = AUDIO * ---------------------------- */ /** * * Define TEST_AUDIO parameter. * * TEST_AUDIO parameter's available values are: * -> LIST: to test all the Keybeep or Tones or Melody or Voice memo Tests * -> ONESHOT: to test just one audio test */ #define TEST_AUDIO (ONESHOT) /* * Only with BT devices * -------------------- */ /** * * bd_addr of BT devices used to execute tests. * * Note that in case where two separated devices are used, BD_ADDR_LOC and * BD_ADDR_REM values shouldn't depend on DEVICE_A or DEVICE_B. * */ #ifdef DEVICE_A #define BD_ADDR_LOC {0x00, 0xD0, 0xB7, 0x03, 0x17, 0x26} #define BD_ADDR_REM {0x00, 0xD0, 0xB7, 0x03, 0x17, 0x48} #endif #ifdef DEVICE_B #define BD_ADDR_LOC {0x00, 0xD0, 0xB7, 0x03, 0x17, 0x48} #define BD_ADDR_REM {0x00, 0xD0, 0xB7, 0x03, 0x17, 0x26} #endif #endif /* _RV_TEST_CFG_H_ */