FreeCalypso > hg > freecalypso-sw
view gsm-fw/g23m-aci/aci/aci_bat_sim.c @ 992:a7b0b426f9ca
target-utils: boot ROM UART autodetection revamped
The new implementation should work with both the familiar Calypso C035
boot ROM version found in our regular targets as well as the older
Calypso F741979B version found on the vintage D-Sample board.
author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
---|---|
date | Wed, 30 Dec 2015 21:28:41 +0000 |
parents | eedbf248bac0 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ACI_BAT +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This BAT wrapper modul is ... | +----------------------------------------------------------------------------- */ #include "aci_all.h" /* includes prim.h, which includes p_bat.h */ #include "aci_cmh.h" /* prototypes of sAT_,qAT_,tAT_ */ #include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ #include "ati_cmd.h" #include "aci_cmd.h" #include "aci_bat.h" #include "psa.h" #include "cmh.h" #include "audio.h" #include "aci_ext_pers.h" #include "aci_slock.h" /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCPIN | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCPIN (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; char pinOld [MAX_PWD_LENGTH]={0}; char pinNew [MAX_PWD_LENGTH]={0}; char* p_pinNew; UBYTE slockBlocked = 0; TRACE_FUNCTION ("sBAT_PlusCPIN()"); p_pinNew = pinNew; memset(pinOld,0,MAX_PWD_LENGTH); memcpy(pinOld,cmd->params.ptr_set_plus_cpin->pin,cmd->params.ptr_set_plus_cpin->c_pin); if(cmd->params.ptr_set_plus_cpin->v_newpin) { memcpy(pinNew,cmd->params.ptr_set_plus_cpin->newpin,cmd->params.ptr_set_plus_cpin->c_newpin); } else { p_pinNew = NULL; } #ifdef SIM_PERS slockBlocked = AciSLockShrd.blocked; #endif ret = (T_ACI_BAT_RSLT)sAT_PlusCPIN ((T_ACI_CMD_SRC)src_infos_psi->srcId,pinOld,p_pinNew); switch((T_ACI_RETURN)ret) { case(AT_EXCT): case (AT_FAIL): { break; } case(AT_BUSY): { ACI_ERR_DESC(ACI_ERR_CLASS_Cme, CME_ERR_SimBusy); break; } case(AT_CMPL): { if (!slockBlocked) { ACI_ERR_DESC(ACI_ERR_CLASS_Cme, CME_ERR_Unknown); } break; } } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCPIN | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCPIN (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_ACI_CPIN_RSLT code; T_BAT_cmd_response resp; T_BAT_res_que_plus_cpin que_cpin_buffer; TRACE_FUNCTION ("qBAT_PlusCPIN()"); ret=(T_ACI_BAT_RSLT) qAT_PlusCPIN ((T_ACI_CMD_SRC)src_infos_psi->srcId,&code); resp.ctrl_response = BAT_RES_QUE_PLUS_CPIN; /*PIN status is requested*/ resp.response.ptr_que_plus_cpin = &que_cpin_buffer; switch ((T_ACI_RETURN)ret) { case(AT_CMPL): { resp.response.ptr_que_plus_cpin->code = (T_BAT_plus_cpin_code)code; aci_bat_send(src_infos_psi,&resp); break; } case(AT_EXCT): default : { break; } } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCPOL | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCPOL (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_plus_cpol_format format = BAT_CPOL_FORMAT_NOT_PRESENT ; SHORT index = (SHORT)BAT_PARAMETER_NOT_PRESENT; char op[20] = {0}; char* p_op; TRACE_FUNCTION ("sBAT_PlusCPOL()"); p_op = op; index = cmd->params.ptr_set_plus_cpol->index; format = cmd->params.ptr_set_plus_cpol->format; if(cmd->params.ptr_set_plus_cpol->v_oper) { memcpy(op,cmd->params.ptr_set_plus_cpol->oper,cmd->params.ptr_set_plus_cpol->c_oper); } else { p_op = NULL; } ret=(T_ACI_BAT_RSLT)sAT_PlusCPOL((T_ACI_CMD_SRC)src_infos_psi->srcId,index,(T_ACI_CPOL_FRMT)format,p_op, (SHORT)BAT_PARAMETER_NOT_PRESENT,CPOL_MOD_NotPresent); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : tBAT_PlusCPOL | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT tBAT_PlusCPOL (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; SHORT lastIdx=0,usdNtry=0; T_BAT_cmd_response resp; T_BAT_res_tst_plus_cpol tst_cpol_buffer; TRACE_FUNCTION ("tBAT_PlusCPOL()"); resp.ctrl_response = BAT_RES_TST_PLUS_CPOL; resp.response.ptr_tst_plus_cpol = &tst_cpol_buffer; ret =(T_ACI_BAT_RSLT) tAT_PlusCPOL((T_ACI_CMD_SRC)src_infos_psi->srcId,&lastIdx,&usdNtry); if (ret EQ ((T_ACI_BAT_RSLT)AT_CMPL)) { resp.response.ptr_tst_plus_cpol->index1 = 1; resp.response.ptr_tst_plus_cpol->index2 = lastIdx; aci_bat_send(src_infos_psi,&resp); } return ret; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCPOL | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCPOL (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { //T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_ACI_CPOL_LST plmnSelLst; T_BAT_cmd_response resp; T_BAT_res_que_plus_cpol que_cpol_buffer; SHORT startIdx=0,lastIdx=0; UBYTE idx; BOOL loop; TRACE_FUNCTION ("qBAT_PlusCPOL()"); resp.ctrl_response = BAT_RES_QUE_PLUS_CPOL; resp.response.ptr_que_plus_cpol = &que_cpol_buffer; switch (qAT_PlusCPOL ((T_ACI_CMD_SRC) src_infos_psi->srcId,1, &lastIdx,&plmnSelLst[0],CPOL_MOD_NotPresent)) { case AT_CMPL: { loop = TRUE; do { if( lastIdx EQ (SHORT)BAT_PARAMETER_NOT_PRESENT ) { break; } startIdx = lastIdx+1; for( idx=0; idx < MAX_OPER; idx++ ) { if( plmnSelLst[idx].index EQ (SHORT)BAT_PARAMETER_NOT_PRESENT ) { loop = FALSE; break; } resp.response.ptr_que_plus_cpol->format = (T_BAT_plus_cpol_format)plmnSelLst[idx].format; resp.response.ptr_que_plus_cpol->index = (U8)plmnSelLst[idx].index; resp.response.ptr_que_plus_cpol->c_oper = strlen(plmnSelLst[idx].oper); memcpy(resp.response.ptr_que_plus_cpol->oper,plmnSelLst[idx].oper,strlen(plmnSelLst[idx].oper)); aci_bat_send(src_infos_psi,&resp); } if( qAT_PlusCPOL((T_ACI_CMD_SRC)src_infos_psi->srcId, startIdx, &lastIdx, &plmnSelLst[0], CPOL_MOD_NotPresent) EQ AT_FAIL OR !loop) { break; } } while( loop ); return ACI_BAT_CMPL; } case AT_EXCT: { return ACI_BAT_EXCT; } default: { return ACI_BAT_FAIL; } } } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCNUM | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCNUM (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; TRACE_FUNCTION ("sBAT_PlusCNUM()"); if(qAT_PlusCNUM ((T_ACI_CMD_SRC) src_infos_psi->srcId, CNUM_MOD_NewRead) EQ AT_EXCT) { return ACI_BAT_EXCT; } return ret; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCFUN | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCFUN (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_plus_cfun_fun fun = BAT_CFUN_FUN_NOT_PRESENT; T_BAT_plus_cfun_rst rst = BAT_CFUN_RST_NOT_PRESENT; TRACE_FUNCTION ("sBAT_PlusCFUN()"); /* * This relies on T_BAT_VAL_plus_cfun_fun being identical to * T_ACI_CFUN_FUN and T_BAT_VAL_plus_cfun_rst being identical * to T_ACI_CFUN_RST. At the time of writing, they are. */ fun=cmd->params.ptr_set_plus_cfun->fun; rst=cmd->params.ptr_set_plus_cfun->rst; /* * Call the corresponding sAT function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)sAT_PlusCFUN((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_ACI_CFUN_FUN)fun,(T_ACI_CFUN_RST)rst); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCFUN | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCFUN (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_ACI_CFUN_FUN fun; TRACE_FUNCTION ("qBAT_PlusCFUN()"); /* * Call the corresponding sAT function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)qAT_PlusCFUN((T_ACI_CMD_SRC)src_infos_psi->srcId,&fun); /* * If the query completes, we must send a response. */ if (ret==ACI_BAT_CMPL) { T_BAT_cmd_response resp; T_BAT_res_que_plus_cfun cfun_data; resp.ctrl_response=BAT_RES_QUE_PLUS_CFUN; resp.response.ptr_que_plus_cfun=&cfun_data; /* * This relies on T_BAT_plus_cfun_fun being identical to * T_ACI_CFUN_FUN. */ cfun_data.fun=(T_BAT_plus_cfun_fun)fun; aci_bat_send(src_infos_psi,&resp); } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCIMI | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCIMI (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; CHAR imsi[MAX_IMSI_LEN+1]; T_BAT_cmd_response resp; T_BAT_res_set_plus_cimi set_cimi_buffer; TRACE_FUNCTION ("sBAT_PlusCIMI()"); resp.ctrl_response = BAT_RES_SET_PLUS_CIMI ; resp.response.ptr_set_plus_cimi = &set_cimi_buffer; ret =(T_ACI_BAT_RSLT) qAT_PlusCIMI((T_ACI_CMD_SRC)src_infos_psi->srcId, imsi); if (ret EQ ACI_BAT_CMPL) { resp.response.ptr_set_plus_cimi->c_imsi = strlen(imsi); memcpy(resp.response.ptr_set_plus_cimi->imsi,imsi,resp.response.ptr_set_plus_cimi->c_imsi); aci_bat_send(src_infos_psi,&resp); } return ret; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCRSM | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCRSM (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_plus_crsm_command command; UBYTE *data; SHORT fileId = (SHORT)BAT_PARAMETER_NOT_PRESENT, p1 = (SHORT)BAT_PARAMETER_NOT_PRESENT, p2 = (SHORT)BAT_PARAMETER_NOT_PRESENT, p3 = (SHORT)BAT_PARAMETER_NOT_PRESENT; TRACE_FUNCTION ("sBAT_PlusCRSM()"); command = cmd->params.ptr_set_plus_crsm->command; if(cmd->params.ptr_set_plus_crsm->fileid NEQ (S32)BAT_PARAMETER_NOT_PRESENT) { fileId = (SHORT)cmd->params.ptr_set_plus_crsm->fileid; } p1 = cmd->params.ptr_set_plus_crsm->p1; p2 = cmd->params.ptr_set_plus_crsm->p2; p3 = cmd->params.ptr_set_plus_crsm->p3; data = cmd->params.ptr_set_plus_crsm->data; ret=(T_ACI_BAT_RSLT)sAT_PlusCRSM( (T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CRSM_CMD)command, fileId, p1,p2,p3, (SHORT)cmd->params.ptr_set_plus_crsm->c_data, data); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCSIM | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCSIM (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; UBYTE *data; USHORT lenData = 0; TRACE_FUNCTION ("sBAT_PlusCSIM()"); data = cmd->params.ptr_set_plus_csim->command; lenData=(USHORT)cmd->params.ptr_set_plus_csim->c_command; if (lenData EQ 0) return ACI_BAT_FAIL; ret =(T_ACI_BAT_RSLT) sAT_PlusCSIM((T_ACI_CMD_SRC) src_infos_psi->srcId, lenData, data ); return ret; } #ifdef TI_PS_FF_AT_P_CMD_ATR /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentATR | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentATR (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; UBYTE phase; UBYTE atr_len; UBYTE atr_info[MAX_SIM_ATR]; T_BAT_cmd_response resp; T_BAT_res_que_percent_atr que_atr_buffer; TRACE_FUNCTION ("qBAT_PercentATR()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_ATR ; resp.response.ptr_que_percent_atr = &que_atr_buffer; ret =(T_ACI_BAT_RSLT) qAT_PercentATR((T_ACI_CMD_SRC) src_infos_psi->srcId, &phase, &atr_len, atr_info ); if(ret EQ ACI_BAT_CMPL) { resp.response.ptr_que_percent_atr->phase = (T_BAT_percent_atr_phase)phase ; resp.response.ptr_que_percent_atr->c_atr = atr_len; memcpy(resp.response.ptr_que_percent_atr->atr,atr_info,resp.response.ptr_que_percent_atr->c_atr); aci_bat_send(src_infos_psi,&resp); } return(ret); } #endif /* TI_PS_FF_AT_P_CMD_ATR */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentPVRF | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentPVRF (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; CHAR pin[10]; CHAR newpin[10]; CHAR* p_newpin; TRACE_FUNCTION ("sBAT_PercentPVRF()"); p_newpin = newpin; memset(pin,0,sizeof(pin)); if (cmd->params.ptr_set_percent_pvrf->type <= BAT_P_PVRF_TYPE_PUK2)/*lint !e685 (Warning : always evaluates to false)*/ { memcpy(pin,cmd->params.ptr_set_percent_pvrf->pin,cmd->params.ptr_set_percent_pvrf->c_pin); if(cmd->params.ptr_set_percent_pvrf->v_newpin) { memcpy(newpin,cmd->params.ptr_set_percent_pvrf->newpin,cmd->params.ptr_set_percent_pvrf->c_newpin); } else { p_newpin = NULL; } ret =(T_ACI_BAT_RSLT) sAT_PercentPVRF ((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_ACI_PVRF_TYPE)cmd->params.ptr_set_percent_pvrf->type, pin, p_newpin); return(ret); } else { ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_OpNotAllow); return (ACI_BAT_FAIL); } } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentPVRF | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentPVRF (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_BAT_cmd_response resp; T_BAT_res_que_percent_pvrf que_pvrf_buffer; SHORT pn2cnt = 0; SHORT pk1cnt = 0; SHORT pk2cnt = 0; T_BAT_percent_pvrf_ps1 ps1 = BAT_P_PVRF_PS1_NOT_PRESENT ; T_BAT_percent_pvrf_ps2 ps2 = BAT_P_PVRF_PS2_NOT_PRESENT ; TRACE_FUNCTION ("qBAT_PercentPVRF()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_PVRF ; resp.response.ptr_que_percent_pvrf = &que_pvrf_buffer; resp.response.ptr_que_percent_pvrf->pn2cnt = pn2cnt; resp.response.ptr_que_percent_pvrf->pk1cnt = pk1cnt; resp.response.ptr_que_percent_pvrf->pk2cnt = pk2cnt; resp.response.ptr_que_percent_pvrf->ps1 = ps1; resp.response.ptr_que_percent_pvrf->ps2 = ps2; aci_bat_send(src_infos_psi,&resp); return (ACI_BAT_CMPL); } #ifdef TI_PS_FF_AT_P_CMD_CUST /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentCUST | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentCUST (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { TRACE_FUNCTION ("sBAT_PercentCUST()"); switch(cmd->params.ptr_set_percent_cust->mode) { case(BAT_P_CUST_MODE_NORMAL): case(BAT_P_CUST_MODE_BEHAVIOUR_1): { if (sAT_PercentCUST((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_CUST_MOD)(cmd->params.ptr_set_percent_cust->mode)) EQ AT_FAIL) { return (ACI_BAT_FAIL); } break; } default: { ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown); return (ACI_BAT_FAIL); } } return ACI_BAT_CMPL; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentCUST | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentCUST (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_percent_cust_mode mode; T_BAT_cmd_response resp; T_BAT_res_que_percent_cust que_cust_buffer; TRACE_FUNCTION ("qBAT_PercentCUST()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_CUST; resp.response.ptr_que_percent_cust = &que_cust_buffer; ret = (T_ACI_BAT_RSLT)qAT_PercentCUST((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_CUST_MOD *)&mode); if (ret NEQ ACI_BAT_CMPL) { return (ACI_BAT_FAIL); } resp.response.ptr_que_percent_cust->mode = mode; aci_bat_send(src_infos_psi,&resp); return(ret); } #endif /* TI_PS_FF_AT_P_CMD_CUST */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentSATCC | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentSATCC (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; TRACE_FUNCTION ("sBAT_PercentSATCC()"); ret = (T_ACI_BAT_RSLT)sAT_PercentSATCC((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_SAT_CC_MOD)cmd->params.ptr_set_percent_satcc->mode); return ret; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentSATCC | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentSATCC (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_percent_satcc_mode mode; T_BAT_cmd_response resp; T_BAT_res_que_percent_satcc que_satcc_buffer; TRACE_FUNCTION ("qBAT_PercentSATCC()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_SATCC; resp.response.ptr_que_percent_satcc = &que_satcc_buffer; ret = (T_ACI_BAT_RSLT)qAT_PercentSATCC((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_SAT_CC_MOD *)&mode); if(ret EQ ACI_BAT_CMPL) { resp.response.ptr_que_percent_satcc->mode = mode; aci_bat_send(src_infos_psi,&resp); } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusEFRSLT | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentEFRSLT (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_EFRSLT_RES result; T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PercentEFRSLT()"); /* * This relies on T_BAT_percent_efrslt_result being identical to * T_ACI_EFRSLT_RES. */ result=(T_ACI_EFRSLT_RES)cmd->params.ptr_set_percent_efrslt->result; /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)sAT_PercentEFRSLT((T_ACI_CMD_SRC)src_infos_psi->srcId,result); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentSIMEF | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentSIMEF (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_SIMEF_MODE mode; T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PercentSIMEF()"); /* * This relies on T_BAT_percent_simef_mode being identical to * T_ACI_SIMEF_MODE. */ mode=(T_ACI_SIMEF_MODE)cmd->params.ptr_set_percent_simef->mode; /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)sAT_PercentSIMEF((T_ACI_CMD_SRC)src_infos_psi->srcId,mode); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentSIMEF | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentSIMEF (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; T_BAT_percent_simef_mode mode; T_BAT_cmd_response resp; T_BAT_res_que_percent_simef que_simef_buffer; TRACE_FUNCTION ("qBAT_PercentSIMEF()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_SIMEF; resp.response.ptr_res_que_percent_simef = &que_simef_buffer; ret = (T_ACI_BAT_RSLT)qAT_PercentSIMEF((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_ACI_SIMEF_MODE *)&mode); if(ret EQ ACI_BAT_CMPL) { resp.response.ptr_res_que_percent_simef->mode = mode; aci_bat_send(src_infos_psi,&resp); } return(ret); }