FreeCalypso > hg > freecalypso-sw
view gsm-fw/g23m-gsm/mm/cus_mm.h @ 992:a7b0b426f9ca
target-utils: boot ROM UART autodetection revamped
The new implementation should work with both the familiar Calypso C035
boot ROM version found in our regular targets as well as the older
Calypso F741979B version found on the vintage D-Sample board.
author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
---|---|
date | Wed, 30 Dec 2015 21:28:41 +0000 |
parents | 2f7df7a314f8 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (8410) | Modul : CUS_MM +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Custom dependent definitions for MM of the | mobile station | | Use this header for definitions to integrate the | protocol stack entity MM in your target system ! +----------------------------------------------------------------------------- */ #ifndef CUS_MM_H #define CUS_MM_H /*==== CONSTANTS ==================================================*/ /* * TIMER_VALUES * * Description : The constants define the timer values * for the MM timer TXXX depending on the various * channel types and service access point identifiers. * If your target system uses other units please * change the values. */ #if defined (NEW_FRAME) /* * all timer values in milliseconds */ #define T_3210_VALUE 20000 #define T_3211_VALUE 15000 #define T_3213_VALUE 4000 #define T_3220_VALUE 5000 #define T_3230_VALUE 15000 #define T_3240_VALUE 10000 #ifdef REL99 #define T_3241_VALUE 300000 #endif #define T_REG_VALUE 360000 #define T_T3212_TIC_VALUE 10000 #define TICS_PER_DECIHOURS (1000*60*6) #else #if defined (_TMS470) /* * Unit is 4.615 ms (TDMA frame) */ #define T_3210_VALUE 4337 #define T_3211_VALUE 3250 #define T_3213_VALUE 867 #define T_3220_VALUE 1083 #define T_3230_VALUE 3250 #define T_3240_VALUE 2167 #ifdef REL99 #define T_3241_VALUE 65005 #endif #define T_REG_VALUE 78006 #define T_T3212_TIC_VALUE 2168 #define TICS_PER_DECIHOURS (216*60*6) #else /* * Unit is ca. 50 ms */ #define T_3210_VALUE 400 #define T_3211_VALUE 300 #define T_3213_VALUE 80 #define T_3220_VALUE 100 #define T_3230_VALUE 300 #define T_3240_VALUE 200 #ifdef REL99 #define T_3241_VALUE 6000 #endif #define T_REG_VALUE 7200 #define T_T3212_TIC_VALUE 200 #define TICS_PER_DECIHOURS (20*60*6) #endif /* _TMS470 */ #endif /* NEW_FRAME */ /* * TIMER IDENTIFIER * * Description : The constants define the identifier of the * timer resources of MM. */ #define T_REG_NAME "T_REG" #define T3210_NAME "T3210" #define T3211_NAME "T3211" #define T3212_NAME "T3212" #define T3213_NAME "T3213" #define T3220_NAME "T3220" #define T3230_NAME "T3230" #define T3240_NAME "T3240" #ifdef REL99 #define T3241_NAME "T3241" #endif #define T_HPLMN_NAME "T_HPLMN" /* * MAX_MM_TIMER * * Description : The constant define the number of timer * available in the timer pool. * * NOTE: This constant is only used for old frame. */ #define MAX_MM_TIMER 5 /* * MAX_STORE_ENTRIES * * Description : The constant defines the number of store * entries of the call establishment and timeout * administration in MM. * available in the timer pool. */ #define MAX_STORE_ENTRIES 10 /* * INTERNAL REDIAL * * Description : If no test SIM card is inserted, but a SIM card an * internal redial is tried if the connection establishment * has failed due to random access failed. The constant * define the number of reattempts. */ #define INTERNAL_REDIAL 1 /* * VERSION * * Description : The constants define the type and the value * of a version identification. The version * is part of the monitor struct. */ #define T_VERSION char #define VERSION_MM "MM 1.0" /* * VSI_CALLER * * Description : For multithread applications the constant VSI_CALLER * must be defined to identify the calling thread of the * VSI-Interface. This must be done correponding to the * type of T_VSI_CALLER in VSI.H. The comma symbol is * neccessary because the vsi-functions are called * like this vsi_xxx (VSI_CALLER par2, par3 ...) */ #if defined (NEW_FRAME) #ifdef OPTION_MULTITHREAD #define VSI_CALLER mm_handle, #define VSI_CALLER_SINGLE mm_handle #else #define VSI_CALLER #define VSI_CALLER_SINGLE #endif #else #ifdef OPTION_MULTITHREAD #define VSI_CALLER MM_NAME, #define VSI_CALLER_SINGLE MM_NAME #else #define VSI_CALLER #define VSI_CALLER_SINGLE #endif #endif /*NEW_FRAME */ #endif