FreeCalypso > hg > freecalypso-sw
view gsm-fw/g23m-aci/aci/aci_bat_mm.c @ 934:a8fc7526935e
gsm-fw/sysglue/flashboot.S, C139 configuration: the interface between the
hacked-up bootloader and the main fw has been changed to match TCS211.
author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 31 Oct 2015 03:47:18 +0000 |
parents | eedbf248bac0 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : ACI_BAT +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This BAT wrapper modul is ... | +----------------------------------------------------------------------------- */ #include "aci_all.h" /* includes prim.h, which includes p_bat.h */ #include "aci_cmh.h" /* prototypes of sAT_,qAT_,tAT_ */ #include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ #ifdef FF_ATI_BAT #include "typedefs.h" #include "gdd.h" #include "bat.h" #include "aci_bat.h" #endif /* FF_ATI_BAT */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCOPS | +--------------------------------------------------------------------+ PURPOSE : */ #undef min #define min(a,b) ((a) < (b) ? (a) : (b)) /* from gpf\inc\vcms */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; U8 c_oper = cmd->params.ptr_set_plus_cops->c_oper; CHAR op[MAX_ALPHA_OPER_LEN] = {0}; TRACE_FUNCTION ("sBAT_PlusCOPS()"); c_oper = min(c_oper, MAX_ALPHA_OPER_LEN); if (cmd->params.ptr_set_plus_cops->v_oper EQ TRUE) memcpy(op, cmd->params.ptr_set_plus_cops->oper, c_oper); ret =(T_ACI_BAT_RSLT) sAT_PlusCOPS ((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_COPS_MOD)cmd->params.ptr_set_plus_cops->mode, (T_ACI_COPS_FRMT)cmd->params.ptr_set_plus_cops->format, op); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCOPS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; CHAR op[MAX_ALPHA_OPER_LEN] = {0}; T_ACI_COPS_MOD mode = COPS_MOD_NotPresent; T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent; T_BAT_cmd_response resp; T_BAT_res_que_plus_cops cops; TRACE_FUNCTION ("qBAT_PlusCOPS()"); resp.ctrl_response = BAT_RES_QUE_PLUS_COPS; resp.response.ptr_que_plus_cops = &cops; ret =(T_ACI_BAT_RSLT) qAT_PlusCOPS((T_ACI_CMD_SRC)src_infos_psi->srcId, &mode, &format, op); cops.mode = (T_BAT_plus_cops_mode)mode; cops.format = (T_BAT_plus_cops_format)format; cops.c_oper = strlen(op); cops.v_oper = cops.c_oper ? TRUE : FALSE; if (cops.v_oper) { memcpy(cops.oper, op, cops.c_oper); } aci_bat_send(src_infos_psi, &resp); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : tBAT_PlusCOPS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT tBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_COPS_LST operLst; T_BAT_cmd_response resp; T_BAT_res_tst_plus_cops *pTPC; SHORT startIdx = 0, lastIdx = 0; BOOL END_OF_LIST = FALSE; TRACE_FUNCTION ("tBAT_PlusCOPS()"); memset(&resp, 0x00, sizeof(T_BAT_cmd_response)); pTPC = resp.response.ptr_tst_plus_cops; resp.ctrl_response = BAT_RES_TST_PERCENT_COPS; do { int i; startIdx += lastIdx; ret =(T_ACI_BAT_RSLT) tAT_PlusCOPS((T_ACI_CMD_SRC)src_infos_psi->srcId, startIdx, &lastIdx, &operLst[0]); if (ret NEQ ACI_BAT_CMPL) return (ret); for (i = 0; i < lastIdx; i++) { if ((operLst[i].status EQ COPS_STAT_NotPresent) AND (*operLst[i].numOper EQ 0)) { END_OF_LIST = TRUE; break; } /* Fill BAT resp structs */ pTPC->status = (T_BAT_plus_cops_status)operLst[i].status; pTPC->c_short_oper = strlen(operLst[i].shortOper); pTPC->c_long_oper = strlen(operLst[i].longOper); pTPC->c_num_oper = strlen(operLst[i].numOper); /* Check if there is long operator name, set valid flag and store it. */ if(pTPC->c_long_oper) { pTPC->v_long_oper = TRUE; strncpy((CHAR*)pTPC->long_oper, operLst[i].longOper, pTPC->c_long_oper); } /* Check if there is short operator name, set valid flag and store it. */ if(pTPC->c_short_oper) { pTPC->v_short_oper = TRUE; strncpy((CHAR*)pTPC->short_oper, operLst[i].shortOper, pTPC->c_short_oper); } /* Check if there is num operator name, set valid flag and store it. */ if(pTPC->c_num_oper) { pTPC->v_num_oper = TRUE; strncpy((CHAR*)pTPC->num_oper, operLst[i].numOper, pTPC->c_num_oper); } aci_bat_send(src_infos_psi, &resp); } return (ACI_BAT_CMPL); } while(!END_OF_LIST); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentCOPS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; U8 c_oper = cmd->params.ptr_set_percent_cops->c_oper; CHAR op[MAX_ALPHA_OPER_LEN] = {0}; TRACE_FUNCTION ("sBAT_PercentCOPS()"); c_oper = min(c_oper, MAX_ALPHA_OPER_LEN); if (cmd->params.ptr_set_percent_cops->v_oper EQ TRUE) memcpy(op, cmd->params.ptr_set_percent_cops->oper, c_oper); ret =(T_ACI_BAT_RSLT) sAT_PercentCOPS ((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_COPS_MOD)cmd->params.ptr_set_percent_cops->mode, (T_ACI_COPS_FRMT)cmd->params.ptr_set_percent_cops->format, op); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : tBAT_PercentCOPS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT tBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_COPS_LST operLst; T_BAT_cmd_response resp; T_BAT_res_tst_percent_cops cops; SHORT startIdx = 0, lastIdx = 0; BOOL END_OF_LIST = FALSE; TRACE_FUNCTION ("tBAT_PercentCOPS()"); resp.ctrl_response = BAT_RES_TST_PERCENT_COPS; resp.response.ptr_tst_percent_cops = &cops; do { int i; startIdx += lastIdx; ret =(T_ACI_BAT_RSLT) tAT_PlusCOPS((T_ACI_CMD_SRC)src_infos_psi->srcId, startIdx, &lastIdx, &operLst[0]); if (ret NEQ ACI_BAT_CMPL) return (ret); for (i = 0; i < lastIdx; i++) { if ((operLst[i].status EQ COPS_STAT_NotPresent) AND (*operLst[i].numOper EQ 0)) { END_OF_LIST = TRUE; break; } /* Fill BAT resp structs */ cops.status = (T_BAT_percent_cops_status)operLst[i].status; cops.c_short_oper = strlen(operLst[i].shortOper); cops.c_long_oper = strlen(operLst[i].longOper); cops.c_num_oper = strlen(operLst[i].numOper); /* Check if there is long operator name, set valid flag and store it. */ if(cops.c_long_oper) { cops.v_long_oper = TRUE; strncpy((CHAR*)cops.long_oper, operLst[i].longOper, cops.c_long_oper); } /* Check if there is short operator name, set valid flag and store it. */ if(cops.c_short_oper) { cops.v_short_oper = TRUE; strncpy((CHAR*)cops.short_oper, operLst[i].shortOper, cops.c_short_oper); } /* Check if there is num operator name, set valid flag and store it. */ if(cops.c_num_oper) { cops.v_num_oper = TRUE; strncpy((CHAR*)cops.num_oper, operLst[i].numOper, cops.c_num_oper); } aci_bat_send(src_infos_psi, &resp); } return (ACI_BAT_CMPL); } while(!END_OF_LIST); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentCOPS | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; CHAR op[MAX_ALPHA_OPER_LEN] = {0}; T_ACI_COPS_MOD mode = COPS_MOD_NotPresent; T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent; T_ACI_COPS_SVST svrStatus = COPS_SVST_NotPresent; T_BAT_cmd_response resp; T_BAT_res_que_percent_cops cops; TRACE_FUNCTION ("qBAT_PercentCOPS()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_COPS; resp.response.ptr_que_percent_cops = &cops; ret =(T_ACI_BAT_RSLT) qAT_PercentCOPS((T_ACI_CMD_SRC)src_infos_psi->srcId, &mode, &format, &svrStatus, op); cops.mode = (T_BAT_percent_cops_mode)mode; cops.format = (T_BAT_percent_cops_format)format; cops.service = (T_BAT_percent_cops_service)svrStatus; cops.c_oper = strlen(op); cops.v_oper = cops.c_oper ? TRUE : FALSE; if (cops.v_oper) { memcpy(cops.oper, op, cops.c_oper); } aci_bat_send(src_infos_psi, &resp); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentCREG | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentCREG(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_percent_creg creg; TRACE_FUNCTION ("qBAT_PercentCREG()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_CREG; resp.response.ptr_que_percent_creg = &creg; ret =(T_ACI_BAT_RSLT) qAT_PercentCREG((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CREG_STAT*)&creg.stat, (USHORT*)&creg.lac, (USHORT*)&creg.ci, (T_ACI_P_CREG_GPRS_IND*)&creg.gprs_ind, (U8*)&creg.rt); aci_bat_send(src_infos_psi, &resp); return(ret); } #ifdef TI_PS_FF_AT_CMD_WS46 /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusWS46 | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusWS46(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_plus_ws46_n mode = cmd->params.ptr_set_plus_ws46->n; TRACE_FUNCTION ("sBAT_PlusWS46()"); ret =(T_ACI_BAT_RSLT) sAT_PlusWS46((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_WS46_MOD)mode); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusWS46 | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusWS46(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_plus_ws46 ws46; TRACE_FUNCTION ("qBAT_PlusWS46()"); resp.ctrl_response = BAT_RES_QUE_PLUS_WS46; resp.response.ptr_que_plus_ws46 = &ws46; ret = (T_ACI_BAT_RSLT) qAT_PlusWS46((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_WS46_MOD *)&ws46.n); aci_bat_send(src_infos_psi, &resp); return(ret); } #endif /* TI_PS_FF_AT_CMD_WS46 */ /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentCHPL | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentCHPL(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_OPER_NTRY oper; UBYTE len; TRACE_FUNCTION ("sBAT_PercentCHPL()"); /* * Call the corresponding ACI function. T_ACI_BAT_RSLT is * assumed to be equivalent to T_ACI_RESULT. */ ret=(T_ACI_BAT_RSLT)sAT_PercentCHPL((T_ACI_CMD_SRC) src_infos_psi->srcId,&oper); /* * If the command completes, we must send a response. */ if (ret==ACI_BAT_CMPL) { T_BAT_cmd_response resp; T_BAT_res_set_percent_chpl chpl_data; resp.ctrl_response=BAT_RES_SET_PERCENT_CHPL; resp.response.ptr_set_percent_chpl=&chpl_data; chpl_data.type=BAT_P_CHPL_TYPE_FROM_IMS; switch (cmd->params.ptr_set_percent_chpl->oprfrmt) { case BAT_P_CHPL_OPRFRMT_LONG: len=strlen(oper.longName); if (len<=BAT_MAX_CHPL_OPER_LEN) { memcpy(chpl_data.oper,oper.longName,len); chpl_data.c_oper=(U8)len; } else { return(ACI_BAT_FAIL); } break; case BAT_P_CHPL_OPRFRMT_SHORT: len=strlen(oper.shrtName); if (len<=BAT_MAX_CHPL_OPER_LEN) { memcpy(chpl_data.oper,oper.shrtName,len); chpl_data.c_oper=(U8)len; } else { return(ACI_BAT_FAIL); } break; case BAT_P_CHPL_OPRFRMT_NUMERIC: /* * Representation of the numeric format as in the ATI. */ if ((oper.mnc & 0x00F)==0xF) sprintf((char *)chpl_data.oper, "%03x,%02x",oper.mcc, oper.mnc >> 4); else sprintf((char *)chpl_data.oper, "%03x,%03x",oper.mcc, oper.mnc); chpl_data.c_oper=(U8)strlen((char *)chpl_data.oper); break; default: return(ACI_BAT_FAIL); } aci_bat_send(src_infos_psi,&resp); } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCTZU | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCTZU(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PlusCTZU()"); ret =(T_ACI_BAT_RSLT) sAT_PlusCTZU ((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CTZU_MODE)cmd->params.ptr_set_plus_ctzu->onoff); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCTZU | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCTZU(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_plus_ctzu ctzu; TRACE_FUNCTION ("qBAT_PlusCTZU()"); resp.ctrl_response = BAT_RES_QUE_PLUS_CTZU; resp.response.ptr_que_plus_ctzu = &ctzu; ret =(T_ACI_BAT_RSLT) qAT_PlusCTZU((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CTZU_MODE*)&ctzu.onoff); aci_bat_send(src_infos_psi, &resp); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentCWUP | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentCWUP(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret = ACI_BAT_FAIL; TRACE_FUNCTION ("sBAT_PercentCWUP()"); ret =(T_ACI_BAT_RSLT) sAT_PercentCWUP ((T_ACI_CMD_SRC)src_infos_psi->srcId,(T_ACI_CWUP_TYPE)cmd->params.ptr_set_percent_cwup->type); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentCTZV | +--------------------------------------------------------------------+ PURPOSE : %CTZV command mode (time and date report) */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentCTZV (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PercentCTZV()"); ret =(T_ACI_BAT_RSLT) sAT_PercentCTZV ((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_PCTZV_MODE)cmd->params.ptr_set_percent_ctzv->mode); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PercentCNIV | +--------------------------------------------------------------------+ PURPOSE : %CNIV set command mode (Network name report) */ GLOBAL T_ACI_BAT_RSLT sBAT_PercentCNIV (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PercentCNIV()"); ret =(T_ACI_BAT_RSLT) sAT_PercentCNIV ((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CNIV_MODE)cmd->params.ptr_set_percent_cniv->mode); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PercentCNIV | +--------------------------------------------------------------------+ PURPOSE : %CNIV query command mode */ GLOBAL T_ACI_BAT_RSLT qBAT_PercentCNIV (T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_percent_cniv cniv; TRACE_FUNCTION ("qBAT_PercentCNIV()"); resp.ctrl_response = BAT_RES_QUE_PERCENT_CNIV; resp.response.ptr_que_percent_cniv = &cniv; ret =(T_ACI_BAT_RSLT) qAT_PercentCNIV ((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CNIV_MODE*)&cniv.mode); aci_bat_send(src_infos_psi, &resp); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCIND | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCIND(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; TRACE_FUNCTION ("sBAT_PlusCIND()"); ret =(T_ACI_BAT_RSLT) sAT_PlusCIND((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CIND_SIGNAL_TYPE)cmd->params.ptr_set_plus_cind->signal_ctrl, (T_ACI_CIND_SMSFULL_TYPE)cmd->params.ptr_set_plus_cind->smsfull_ctrl); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCIND | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCIND(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_plus_cind cind; TRACE_FUNCTION ("qBAT_PlusCIND()"); resp.ctrl_response = BAT_RES_QUE_PLUS_CIND; resp.response.ptr_que_plus_cind = &cind; ret = (T_ACI_BAT_RSLT)qAT_PlusCIND((T_ACI_CMD_SRC)src_infos_psi->srcId, (T_ACI_CIND_SIGNAL_TYPE*)&cind.signal, (T_ACI_CIND_SMSFULL_TYPE*)&cind.smsfull); aci_bat_send(src_infos_psi, &resp); return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : sBAT_PlusCMER | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT sBAT_PlusCMER(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_ACI_CMER_MODE_TYPE sCmerModeSettings = CMER_MODE_INVALID; T_ACI_CMER_IND_TYPE sCmerIndicationSettings = CMER_INDICATOR_INVALID; T_ACI_CMER_BFR_TYPE sCmerBfrSettings = CMER_BFR_INVALID; TRACE_FUNCTION ("sBAT_PlusCMER()"); switch (cmd->params.ptr_set_plus_cmer->ind_option) { case BAT_CMER_IND_OPTION_LOWER: ret =(T_ACI_BAT_RSLT) sAT_PlusCMER((T_ACI_CMD_SRC)src_infos_psi->srcId, sCmerModeSettings, sCmerIndicationSettings, sCmerBfrSettings); break; case BAT_CMER_IND_OPTION_GREATER_EQUAL: ret = (T_ACI_BAT_RSLT)sAT_PlusCMER((T_ACI_CMD_SRC)src_infos_psi->srcId, sCmerModeSettings, sCmerIndicationSettings, sCmerBfrSettings); break; case BAT_CMER_IND_OPTION_NOT_PRESENT: default: return ACI_BAT_FAIL; } return(ret); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-F&D (8411) MODULE : ACI_BAT | | STATE : code ROUTINE : qBAT_PlusCMER | +--------------------------------------------------------------------+ PURPOSE : */ GLOBAL T_ACI_BAT_RSLT qBAT_PlusCMER(T_ACI_DTI_PRC_PSI *src_infos_psi, T_BAT_cmd_send *cmd) { T_ACI_BAT_RSLT ret; T_BAT_cmd_response resp; T_BAT_res_que_plus_cmer cmer; T_ACI_CMER_MODE_TYPE sCmerModeSettings; T_ACI_CMER_IND_TYPE sCmerIndicationSettings; T_ACI_CMER_BFR_TYPE sCmerBfrSettings; TRACE_FUNCTION ("qBAT_PlusCMER()"); resp.ctrl_response = BAT_RES_QUE_PLUS_CMER; resp.response.ptr_que_plus_cmer = &cmer; ret =(T_ACI_BAT_RSLT) qAT_PlusCMER((T_ACI_CMD_SRC)src_infos_psi->srcId, &sCmerModeSettings, &sCmerIndicationSettings, &sCmerBfrSettings); switch (cmd->params.ptr_que_plus_cmer->bat_dummy) { default: break; } aci_bat_send(src_infos_psi, &resp); return(ret); }