FreeCalypso > hg > freecalypso-sw
view loadtools/scripts/c155.config @ 853:ae254ffeaec3
AT command interface works!
The cause of the breakage was the same Nucleus API issue with NU_Create_Timer()
which we encountered at the very beginning of this project with Riviera timers:
the code in uartfax.c from TCS211 was passing 0 as the initial dummy value for
the timer duration, and our FreeNucleus version doesn't like it. The fix is
the same: pass 1 as the initial dummy value instead.
author | Space Falcon <falcon@ivan.Harhan.ORG> |
---|---|
date | Thu, 30 Apr 2015 01:46:26 +0000 |
parents | fe9e620c89ff |
children |
line wrap: on
line source
# This configuration is for Motorola C155/156 phones. Use the "generic" # compal configuration for C11x/123 and C139/140. compal-stage thumb # Parameters for the Calypso boot ROM; # will result in the ARM core being clocked at 52 MHz as we want. pll-config 4/1 rhea-cntl 0x00 # The remaining settings are carried out via loadagent commands init-script c155.init # Flash: use CFI autodetection, 8 MiB max # Unlike C139, C155 and C156 phones do have working flash mapping at 0x03000000 flash cfi-8M 0x03000000 # bottom boot flash, sector 0 is only 8 KiB boot-reflash-hack 0x820000 0x2000 # Perform a Iota poweroff when we are done exit-mode iota-off