FreeCalypso > hg > freecalypso-sw
view loadtools/scripts/compal.init @ 853:ae254ffeaec3
AT command interface works!
The cause of the breakage was the same Nucleus API issue with NU_Create_Timer()
which we encountered at the very beginning of this project with Riviera timers:
the code in uartfax.c from TCS211 was passing 0 as the initial dummy value for
the timer duration, and our FreeNucleus version doesn't like it. The fix is
the same: pass 1 as the initial dummy value instead.
author | Space Falcon <falcon@ivan.Harhan.ORG> |
---|---|
date | Thu, 30 Apr 2015 01:46:26 +0000 |
parents | 326363ba5bf4 |
children |
line wrap: on
line source
# Set WS=3 for both nCS0 and nCS1. This configuration is used by OsmocomBB # for all 3 Compal models (E86/88/99), and is also seen in the IDA disassembly # listing of c115-1.0.46.E firmware contributed by Christophe Devine. w16 fffffb00 00A3 w16 fffffb02 00A3 # We need to set the FFFF:FB10 register to map the flash (not the boot ROM) # to address 0. We need this mapping in order to be able to dump and program # the entire flash, as for some reason the alternate nCS0 mapping at 0x03000000 # does not work on Compal phones. (That alternate mapping works fine on # Openmoko and Pirelli phones, though. Perhaps the different Calypso chip # version is the culprit, or perhaps this alternate mapping works only if the # physical nIBOOT pin is low.) w16 fffffb10 0300