+
−/******************************************************************************/
+
−/*                                                                            */
+
−/*    File Name:   rtc_config.h                                               */
+
−/*                                                                            */
+
−/*    Purpose:   This file contains adresses for RTC register access.         */
+
−/*               and defined value                                            */
+
−/*                                                                            */
+
−/*    Note:      None.                                                        */
+
−/*                                                                            */
+
−/*    Revision History:                                                       */
+
−/*    05/31/01   Laurent Sollier      Create.                                 */
+
−/*                                                                            */
+
−/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved  */
+
−/*                                                                            */
+
−/******************************************************************************/
+
−
+
−#ifndef _RTC_CONFIG_H_
+
−#define _RTC_CONFIG_H_
+
−
+
−#include "../../include/config.h"
+
−
+
−#include "../mem.h" 
+
−#include "../../riviera/rv/general.h"
+
−
+
−
+
−/* FOR ULYSSE AND CALYPSO CHIP */
+
−				/* Seconds register */
+
−#define RTC_SECONDS_REG		(UINT8 *)(RTC_XIO_START)
+
−				/* Minutes register */
+
−#define RTC_MINUTES_REG		((UINT8 *)(RTC_XIO_START) + 0x01)
+
−				/* Hours register */
+
−#define RTC_HOURS_REG		((UINT8 *)(RTC_XIO_START) + 0x02)
+
−				/* Days register */
+
−#define RTC_DAYS_REG		((UINT8 *)(RTC_XIO_START) + 0x03)
+
−				/* Months register */
+
−#define RTC_MONTHS_REG		((UINT8 *)(RTC_XIO_START) + 0x04)
+
−				/* Years register */
+
−#define RTC_YEARS_REG		((UINT8 *)(RTC_XIO_START) + 0x05)
+
−				/* Week register */
+
−#define RTC_WEEK_REG		((UINT8 *)(RTC_XIO_START) + 0x06)
+
−				/* Alarms seconds register */
+
−#define RTC_ALARM_SECONDS_REG	((UINT8 *)(RTC_XIO_START) + 0x08)
+
−				/* Alarms minutes register */
+
−#define RTC_ALARM_MINUTES_REG	((UINT8 *)(RTC_XIO_START) + 0x09)
+
−				/* Alarms hours register */
+
−#define RTC_ALARM_HOURS_REG	((UINT8 *)(RTC_XIO_START) + 0x0A)
+
−				/* Alarms days register */
+
−#define RTC_ALARM_DAYS_REG	((UINT8 *)(RTC_XIO_START) + 0x0B)
+
−				/* Alarms months register */
+
−#define RTC_ALARM_MONTHS_REG	((UINT8 *)(RTC_XIO_START) + 0x0C)
+
−				/* Alarms years register */
+
−#define RTC_ALARM_YEARS_REG	((UINT8 *)(RTC_XIO_START) + 0x0D)
+
−				/* Control register */
+
−#define RTC_CTRL_REG		((UINT8 *)(RTC_XIO_START) + 0x10)
+
−				/* Status register */
+
−#define RTC_STATUS_REG		((UINT8 *)(RTC_XIO_START) + 0x11)
+
−				/* Interrupts register */
+
−#define RTC_INTERRUPTS_REG	((UINT8 *)(RTC_XIO_START) + 0x12)
+
−				/* LSB compensation register */
+
−#define RTC_COMP_LSB_REG	((UINT8 *)(RTC_XIO_START) + 0x13)
+
−				/* MSB compensation register */
+
−#define RTC_COMP_MSB_REG	((UINT8 *)(RTC_XIO_START) + 0x14)
+
−
+
−/* RTC Control register description */
+
−
+
−#define RTC_START_RTC		0x0001	/* 1 => RTC is running */
+
−#define RTC_ROUND_30S		0x0002	/* Time rounded to the closest minute */
+
−#define RTC_AUTO_COMP		0x0004	/* Auto compensation enabled or not */
+
−#define RTC_MODE_12_24		0x0008	/* 12 hours mode*/
+
−#define RTC_TEST_MODE		0x0010	/* Test mode */
+
−#define RTC_SET_32_COUNTER	0x0020 	/* set 32 KHz counter with comp_reg */
+
−#if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11))
+
−    #define RTC_nDELTA_OMEGA	0x0040  /* Analog Baseband Type */
+
−#endif
+
−
+
−
+
−/* RTC Interrupt register description */
+
−
+
−#define RTC_EVERY	0x0003
+
−	/* Define period of periodic interrupt (second, minute, hour, day) */
+
−#define RTC_IT_TIMER	0x0004		/* Enable periodic interrupt */
+
−#define RTC_IT_ALARM	0x0008		/* Alarm interrupt enabled or not */	
+
−
+
−/* RTC Status register description */
+
−
+
−#define RTC_BUSY	0x0001
+
−#define RTC_RUN		0x0002		/* RTC is running */
+
−#define RTC_1S_EVENT	0x0004		/* One second has occured */
+
−#define RTC_1M_EVENT	0x0008		/* One minute has occured */
+
−#define RTC_1H_EVENT	0x0010		/* One hour has occured */
+
−#define RTC_1D_EVENT	0x0020		/* One day has occrued */
+
−#define RTC_ALARM	0x0040		/* Alarm interrupt has been generated */
+
−#define RTC_POWER_UP	0x0080		/* Indicates that a reset occured */
+
−
+
−#define RTC_EVERY_SEC	0x0000
+
−#define RTC_EVERY_MIN  	0x0001
+
−#define RTC_EVERY_HR	0x0002
+
−#define RTC_EVERY_DAY	0x0003
+
−
+
−/* 32 Khz and HF clock definition */
+
−#define RTC_CLOCK_32K 32768.0
+
−
+
−	/* HF clock definition */
+
−#if ((CHIPSET == 3) || (CHIPSET == 5) || (CHIPSET == 6))
+
−	#define RTC_CLOCK_HF 65000000.0
+
−#elif ((CHIPSET == 4) || (CHIPSET == 7) || (CHIPSET == 8))
+
−	#define RTC_CLOCK_HF 78000000.0
+
−#elif ((CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12))
+
−	#define RTC_CLOCK_HF 104000000.0
+
−#endif
+
−
+
−
+
−
+
−#endif /* #ifndef _RTC_CONFIG_H_ */