FreeCalypso > hg > freecalypso-sw
view gsm-fw/cdg/cdginc-locosto/p_mph.val @ 794:b380a85d77d5
aci/cmh_mmq.c: RTC function interface reverted to the classic TCS211 way
| author | Space Falcon <falcon@ivan.Harhan.ORG> |
|---|---|
| date | Mon, 16 Mar 2015 03:31:35 +0000 |
| parents | 95c433d8c274 |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_mph.val | | SOURCE : "sap\mph.pdf" | | LastModified : "2003-02-04" | | IdAndVersion : "6148.109.01.207" | | SrcFileTime : "Mon Aug 11 13:32:48 2008" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_MPH_VAL #define P_MPH_VAL #define CDG_ENTER__P_MPH_VAL #define CDG_ENTER__FILENAME _P_MPH_VAL #define CDG_ENTER__P_MPH_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_MPH_VAL__LAST_MODIFIED _2003_02_04 #define CDG_ENTER__P_MPH_VAL__ID_AND_VERSION _6148_109_01_207 #define CDG_ENTER__P_MPH_VAL__SRC_FILE_TIME _Mon_Aug_11_13_32_48_2008 #include "CDG_ENTER.h" #undef CDG_ENTER__P_MPH_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_arfcn */ #define VAL_ARFCN___0 (0x0) /* E-GSM 900 */ #define VAL_ARFCN___1000 (0x1000) /* E-GSM 900 (E-GSM mode, std=2) */ #define VAL_ARFCN___3000 (0x3000) /* E-GSM 900 (Extended dual mode, std=6) */ /* * Value constants for VAL_comb_ccch */ #define COMB_CCCH_NOT_COMB (0x0) /* CCCH not combined with SDCCH */ #define COMB_CCCH_COMB (0x1) /* CCCH combined with SDCCH */ /* * Value constants for VAL_tn */ /* * Value constants for VAL_dlt */ /* * Value constants for VAL_pg */ /* * Value constants for VAL_bs_ag_blocks_res */ /* * Value constants for VAL_bs_pa_mfrms */ #define VAL_BS_PA_MFRMS___0 (0x0) /* 2 Multiframe Periods */ #define VAL_BS_PA_MFRMS___1 (0x1) /* 3 Multiframe Periods */ #define VAL_BS_PA_MFRMS___2 (0x2) /* 4 Multiframe Periods */ #define VAL_BS_PA_MFRMS___3 (0x3) /* 5 Multiframe Periods */ #define VAL_BS_PA_MFRMS___4 (0x4) /* 6 Multiframe Periods */ #define VAL_BS_PA_MFRMS___5 (0x5) /* 7 Multiframe Periods */ #define VAL_BS_PA_MFRMS___6 (0x6) /* 8 Multiframe Periods */ #define VAL_BS_PA_MFRMS___7 (0x7) /* 9 Multiframe Periods */ /* * Value constants for VAL_power */ /* * Value constants for VAL_rx_lev */ /* * Value constants for VAL_rx_qual_full */ /* * Value constants for VAL_bsic */ #define MPH_BSIC_UNKNOWN (0x40) /* Cell is removed from list (GPRS) */ /* * Value constants for VAL_dtx */ #define DTX_NOT_USED (0x0) /* DTX is not used */ #define DTX_USED (0x1) /* DTX is used */ /* * Value constants for VAL_otd */ /* * Value constants for VAL_ta */ #define TA_NOT_AVAIL (0xff) /* timing advance is not available in Idle Mode */ /* * Value constants for VAL_v_start */ #define VAL_V_START___0 (0x0) /* not valid */ #define VAL_V_START___1 (0x1) /* valid */ /* * Value constants for VAL_ch */ #define CH_TCH_F (0x1) /* TCH/F, FACCH Full Rate */ #define CH_TCH_H_1 (0x2) /* TCH/H(1), FACCH Half Rate */ #define CH_TCH_H_2 (0x3) /* TCH/H(2), FACCH Half Rate */ #define CH_SDCCH_4_0 (0x4) /* SDCCH/4(0) */ #define CH_SDCCH_4_1 (0x5) /* SDCCH/4(1) */ #define CH_SDCCH_4_2 (0x6) /* SDCCH/4(2) */ #define CH_SDCCH_4_3 (0x7) /* SDCCH/4(3) */ #define CH_SDCCH_8_0 (0x8) /* SDCCH/8(0) */ #define CH_SDCCH_8_1 (0x9) /* SDCCH/8(1) */ #define CH_SDCCH_8_2 (0xa) /* SDCCH/8(2) */ #define CH_SDCCH_8_3 (0xb) /* SDCCH/8(3) */ #define CH_SDCCH_8_4 (0xc) /* SDCCH/8(4) */ #define CH_SDCCH_8_5 (0xd) /* SDCCH/8(5) */ #define CH_SDCCH_8_6 (0xe) /* SDCCH/8(6) */ #define CH_SDCCH_8_7 (0xf) /* SDCCH/8(7) */ /* * Value constants for VAL_tsc */ /* * Value constants for VAL_h */ #define H_NO (0x0) /* no hopping */ #define H_FREQ (0x1) /* frequency hopping */ /* * Value constants for VAL_maio */ /* * Value constants for VAL_hsn */ /* * Value constants for VAL_rlt */ /* * Value constants for VAL_pwrc */ #define PWRC_NOT_SET (0x0) /* PWRC is not set, exact meaning is defined in GSM 05.08 */ #define PWRC_SET (0x1) /* PWRC is set, exact meaning is defined in GSM 05.08 */ /* * Value constants for VAL_tav */ /* * Value constants for VAL_algo */ #define ALGO_A5_1 (0x0) /* A5/1 */ #define ALGO_A5_2 (0x1) /* A5/2 */ #define ALGO_A5_3 (0x2) /* A5/3 */ #define ALGO_A5_4 (0x3) /* A5/4 */ #define ALGO_A5_5 (0x4) /* A5/5 */ #define ALGO_A5_6 (0x5) /* A5/6 */ #define ALGO_A5_7 (0x6) /* A5/7 */ /* * Value constants for VAL_mod */ #define MODE_CELL_SELECTION (0x0) /* cell selection */ #define MODE_CELL_RESELECTION (0x1) /* cell reselection */ #define VAL_MOD___2 (0x2) /* unused */ #define MODE_IMM_ASSIGN (0x3) /* immediate assignment */ #define MODE_CHAN_ASSIGN (0x4) /* channel assignment */ #define MODE_ASYNC_HANDOVER (0x5) /* asynchronous handover */ #define MODE_SYNC_HANDOVER (0x6) /* synchronous handover */ #define MODE_PRE_SYNC_HANDOVER (0x7) /* pre synchronous handover */ #define MODE_PSEUDO_SYNC_HANDOVER (0x8) /* pseudo synchronous handover */ #define MODE_SYS_INFO_CHANGE (0x9) /* sys info has changed */ #define MODE_PACKET_TRANSFER (0xa) /* enter packet transfer mode */ #define MODE_PDCH_ASSIGN (0xb) /* PDCH assignment */ #define MODE_CELL_CHANGE_ORDER (0xc) /* network controlled cell change */ #define MODE_CELL_RESELECTION_SYNC_ONLY (0xd) /* Sync only */ #define MODE_CONFIG_PL (0xe) /* Config idle mode params, but don't start processes in L1 */ /* * Value constants for VAL_mode */ #define MODE_SIG_ONLY (0x0) /* signalling only */ #define MODE_SPEECH_VER1 (0x1) /* speech (full rate or half rate), version 1 */ #define MODE_SPEECH_VER2 (0x21) /* speech (full rate or half rate), version 2 */ #define MODE_SPEECH_VER3 (0x41) /* speech (full rate or half rate), version 3 */ #define MODE_DATA_14_5 (0xf) /* data, 14.5 kbit/s radio interface rate, corresponds to 14.4 kbit/s user rate */ #define MODE_DATA_12_0 (0x3) /* data, 12.0 kbit/s radio interface rate, corresponds to 9.6 kbit/s user rate */ #define MODE_DATA_6_0 (0xb) /* data, 6.0 kbit/s radio interface rate, corresponds to 4.8 kbit/s user rate */ #define MODE_DATA_3_6 (0x13) /* data, 3.6 kbit/s radio interface rate, corresponds to 2.4 kbit/s user rate */ /* * Value constants for VAL_st_mode */ #define CODEC_MODE_1 (0x0) /* lowest codec mode */ #define CODEC_MODE_2 (0x1) /* second lowest mode */ #define CODEC_MODE_3 (0x2) /* third lowest mode */ #define CODEC_MODE_4 (0x3) /* highest mode */ /* * Value constants for VAL_cs */ #define CS_NO_BCCH_AVAIL (0x0) /* no BCCH available */ #define CS_DOWN_LINK_FAIL (0x1) /* down link failure */ #define CS_RADIO_LINK_FAIL (0x2) /* radio link failure */ #define CS_NO_HBCCH_AVAIL (0x3) /* no HPLMN BCCH available */ #define CS_BCCH_READ_ERROR (0x8) /* error during BCCH reading */ #define CS_STOP_BCCH_READING (0xa) /* stop BCCH reading */ #define CS_STOP_PLMN_SEARCH (0xb) /* Stop PLMN search */ #define CS_CLEAN_SYS_INFO (0xc) /* Clean System Information buffer */ #define CS_SYS_INFO_1_NOT_NEEDED (0xd) /* System info 1 is not needed */ #define CS_RXLEV_VAL_REQ (0xe) /* Rxlev values are requested */ #define CS_STOP_PLMN_SEARCH_AND_DEACTIVATE (0xf) /* Stop PLMN search and enter sleep mode */ #define CS_SCELL_IS_SYNCED (0x10) /* Synchronization done */ #define CS_START_PCCO (0x11) /* start of packet cell change order and the cell is not in the BA list */ #define CS_NC_SYNC_FAILED (0x12) /* Lost synchronization with neighbour cell */ #define CS_SYS_INFO_2BIS_SUPPORT_CHANGED (0x13) /* Started/stopped broadcasting of SI2bis in idle */ #define CS_SYS_INFO_2TER_SUPPORT_CHANGED (0x14) /* Started/stopped broadcasting of SI2ter in idle */ #define CS_NO_ERROR (0xff) /* no error occurred */ /* * Value constants for VAL_pclass */ #define CLASS_1 (0x0) /* class 1 */ #define CLASS_2 (0x1) /* class 2 */ #define CLASS_3 (0x2) /* class 3 */ #define CLASS_4 (0x3) /* class 4 */ #define CLASS_5 (0x4) /* class 5 */ /* * Value constants for VAL_tch_loop */ #define VAL_TCH_LOOP___FF (0xff) /* NOT_PRESENT_8BIT, open TCH loop, valid OPEN_LOOP_CMD message has been received */ #define TCH_LOOP_A (0x0) /* Internal test TCH loop command A */ #define TCH_LOOP_B (0x1) /* Internal test TCH loop command B */ #define TCH_LOOP_C (0x2) /* Internal test TCH loop command C */ #define TCH_LOOP_D (0x3) /* Internal test TCH loop command D */ #define TCH_LOOP_E (0x4) /* Internal test TCH loop command E */ #define TCH_LOOP_F (0x5) /* Internal test TCH loop command F */ #define TCH_LOOP_I (0x6) /* Internal test TCH loop command I */ /* * Value constants for VAL_dedi_res */ #define DEDI_RES_OK (0x0) /* success */ #define DEDI_RES_TIMEOUT (0x1) /* timeout */ #define DEDI_RES_TA_OUT_OF_RANGE (0x2) /* timing advance out of range */ #define DEDI_RES_CELL_NOT_SYNC (0x3) /* cell not sync by ALR */ /* * Value constants for VAL_device */ #define DAI_NO_TEST (0x0) /* normal operation (no tested device via DAI) */ #define DAI_SPEECH_DL (0x1) /* test of speech decoder / DTX downlink */ #define DAI_SPEECH_UL (0x2) /* test of speech decoder / DTX uplink */ #define DAI_AD_DA (0x4) /* test of acoustic devicesand A/D and D/A */ /* * Value constants for VAL_ho_pow */ /* * Value constants for VAL_ho_acc_type */ #define VAL_HO_ACC_TYPE___0 (0x0) /* sending of HANDOVER ACCESS is mandatory */ #define VAL_HO_ACC_TYPE___1 (0x1) /* sending of HANDOVER ACCESS is optional */ /* * Value constants for VAL_ho_nci */ #define NCI_TA_OUT_OF_RANGE_OK (0x0) /* timing advance out of range allowed */ #define NCI_TA_OUT_OF_RANGE_NOT_ALLOWED (0x1) /* timing advance out of range not allowed */ /* * Value constants for VAL_multi_band */ #define MULTI_BAND_0 (0x0) /* normal operation */ #define MULTI_BAND_1 (0x1) /* one cell of the non-serving cell band */ #define MULTI_BAND_2 (0x2) /* two cells of the non-serving cell band */ #define MULTI_BAND_3 (0x3) /* three cells of the non-serving cell band */ /* * Value constants for VAL_len_imsi */ #define VAL_LEN_IMSI___0 (0x0) /* indicates not valid */ /* * Value constants for VAL_identity_type */ #define ID_IMSI (0x1) /* Paged by IMSI */ #define ID_TMSI (0x4) /* Paged by TMSI */ #define ID_PTMSI (0x8) /* Paged by PTMSI */ /* * Value constants for VAL_channel_needed */ #define CN_ANY (0x0) /* Any channel */ #define CN_SDCCH (0x1) /* SDCCH */ #define CN_TCH_FULL (0x2) /* TCH Full Rate */ #define CN_TCH_H_OR_F (0x3) /* TCH Half Rate or Full Rate */ #define CN_PACKET (0x4) /* Packet Channel (GPRS only) */ /* * Value constants for VAL_pch_interrupt */ #define NO_PCH_INTERRUPT (0x0) /* Power measurements with PCH listening */ #define PCH_INTERRUPT (0x1) /* Power measurements without PCH listening */ /* * Value constants for VAL_freq_bands */ #define BAND_AUTO (0x0) /* 0b00000000: All bands shall be scanned */ #define BAND_GSM_900 (0x1) /* 0b00000001: GSM 900 is supported, shall be scanned */ #define BAND_DCS_1800 (0x2) /* 0b00000010: DCS 1800 is supported, shall be scanned */ #define BAND_PCS_1900 (0x4) /* 0b00000100: PCS 1900 is supported, shall be scanned */ #define BAND_E_GSM (0x8) /* 0b00001000: Extended GSM is supported, shall be scanned */ #define BAND_GSM_850 (0x10) /* 0b00010000: GSM 850 is supported, shall be scanned */ #define BAND_GSM_450 (0x20) /* 0b00100000: GSM 450 is supported, shall be scanned */ #define BAND_GSM_480 (0x40) /* 0b01000000: GSM 480 is supported, shall be scanned */ #define BAND_R_GSM (0x80) /* 0b10000000: R-GSM is supported, shall be scanned */ #define BAND_DUAL (0x3) /* 0b00000011: GSM 900 and DCS 1800 is supported, shall be scanned */ #define BAND_DUAL_EXT (0xb) /* 0b00001011: GSM 900, E-GSM and DCS 1800 is supported, shall be scanned */ #define BAND_DUAL_US (0x14) /* 0b00010100: GSM 850 and PCS 1900 is supported, shall be scanned */ // VAL-FF: TI_PS_FF_QUAD_BAND_SUPPORT #define BAND_850_1800 (0x12) /* 0b00010010: GSM 850 and DCS 1800 is supported, shall be scanned */ // VAL-FF: TI_PS_FF_QUAD_BAND_SUPPORT #define BAND_900_1900 (0xd) /* 0b00001101: GSM 900, E-GSM and PCS 1900 is supported, shall be scanned */ // VAL-FF: TI_PS_FF_QUAD_BAND_SUPPORT #define BAND_850_900_1800 (0x1b) /* 0b00011011: GSM 850, GSM 900, E-GSM and DCS 1800 is supported, shall be scanned */ // VAL-FF: TI_PS_FF_QUAD_BAND_SUPPORT #define BAND_850_900_1900 (0x1d) /* 0b00011101: GSM 850, GSM 900, E-GSM and PCS 1900 is supported, shall be scanned */ /* * Value constants for VAL_no */ #define NO_STP_SND_CONT_SND (0x0) /* stop sending of RACH bursts */ /* * Value constants for VAL_t1 */ /* * Value constants for VAL_t2 */ /* * Value constants for VAL_t3 */ /* * Value constants for VAL_action */ #define START_MON_NBCCH (0x0) /* start reading of BCCH, excluding ext BCCH */ #define START_MON_EBCCH (0x1) /* start reading of ext BCCH, excluding BCCH */ #define STOP_MON_BCCH (0x2) /* stop reading of BCCH, including both BCCH and ext BCCH (if previously requested) */ #define START_MON_CCCH (0x3) /* start reading of CCCH */ #define STOP_MON_CCCH (0x4) /* stop reading of CCCH */ #define LEAVING_PIM_PBCCH (0x5) /* Leave PIM */ #define LEAVING_PAM_PBCCH (0x6) /* Leave PAM */ #define LEAVING_PTM_PBCCH (0x7) /* Leave PTM */ #define ENTER_PTM_PBCCH (0x8) /* Enter PTM */ #define ENTER_PIM_PBCCH (0x9) /* Enter PIM */ #define ENTER_PTM_BCCH (0xa) /* Enter PTM for BCCH */ /* * Value constants for VAL_si_to_read */ #define UNSPECIFIED_SI (0x0) /* Update of unspecified SI message or SI messages */ #define UPDATE_SI1 (0x1) /* Update of SI1 message */ #define UPDATE_SI2_SI2BIS_OR_SI2TER (0x2) /* Update of SI2, SI2 bis or SI2 ter message */ #define UPDATE_SI3_SI4_SI7_OR_SI8 (0x3) /* Update of SI3, SI4, SI7 or SI8 message */ #define UPDATE_SI9 (0x4) /* Update of SI9 message */ #define COMPLETE_SI (0x5) /* Read complete SI */ #define UPDATE_SI13_GSM (0x6) /* Read SI13 during GPRS activation */ #define UPDATE_SI2QUATER (0x7) /* Request to update SI-2quater */ #define UPDATE_SI2QUATER_AGAIN (0x8) /* Request to update SI-2quater again as the prev si-2quater BA-IND was not correct */ #define UPDATE_SI13 (0xff) /* Update SI13 */ /* * Value constants for VAL_reorg_only */ #define NORMAL_PGM (0x0) /* ignore this parameter (and do not ignore Page Mode IE in PAGING REQUEST messages); used to switch off REORG_ONLY */ #define REORG_ONLY (0x1) /* set page mode to paging reorganisation */ /* * Value constants for VAL_sync_only */ #define NORMAL_BA (0x0) /* normal GSM behaviour */ #define SYNC_LIST (0x1) /* GPRS sync only */ #define RECONFIRM_SYNC_LIST (0x2) /* Reconfirm Sync 10 sec timer for Pbcch Cells */ /* * Value constants for VAL_gprs_sync */ #define NORMAL_MEAS_REP (0x0) /* normal GSM behaviour */ #define SYNC_RESULTS (0x1) /* GPRS sync only */ /* * Value constants for VAL_ba_id */ /* * Value constants for VAL_stat */ #define STAT_INACT (0x0) /* inactive */ #define STAT_ACT (0x1) /* active */ #define STAT_CIPH_OFF (0x0) /* ciphering off */ #define STAT_CIPH_ON (0x1) /* ciphering on */ /* * Value constants for VAL_eotd_res */ #define EOTD_SUCC (0x0) /* success */ #define EOTD_REF (0x1) /* wrong reference BTS */ /* * Value constants for VAL_mfrm_offset */ /* * Value constants for VAL_otd_type */ #define ROUGH_OTD (0x0) /* only roughOTD has been provided by the NW */ #define EXPECTED_OTD (0x1) /* only expectedOTD has been provided by the NW */ #define BOTH_OTD (0x2) /* Both OTD type have been provided by the NW */ /* * Value constants for VAL_exp_otd */ /* * Value constants for VAL_uncertainty */ #define UNC_MAX_2BIT (0x0) /* uncertainty in bits. 0 - 2 bits */ #define UNC_MAX_4BIT (0x1) /* uncertainty in bits. 3 - 4 bits */ #define UNC_MAX_8BIT (0x2) /* uncertainty in bits. 5 - 8 bits */ #define UNC_MAX_12BIT (0x3) /* uncertainty in bits. 9 - 12 bits */ #define UNC_MAX_16BIT (0x4) /* uncertainty in bits. 13 - 16 bits */ #define UNC_MAX_22BIT (0x5) /* uncertainty in bits. 17 - 22 bits */ #define UNC_MAX_30BIT (0x6) /* uncertainty in bits. 23 - 30 bits */ #define UNC_GT_30BIT (0x7) /* uncertainty in bits. > 30 bits */ /* * Value constants for VAL_rough_rtd */ #define VAL_ROUGH_RTD___0 (0x0) /* roughRTD in bits (see expected OTD) */ /* * Value constants for VAL_eotd_avail */ #define VAL_EOTD_AVAIL___0 (0x0) /* EOTD is not available */ #define VAL_EOTD_AVAIL___1 (0x1) /* EOTD is available */ /* * Value constants for VAL_gprs_support */ #define MPH_GPRS_PROCS_USED (0x1) /* yes */ #define MPH_GPRS_PROCS_NOT_USED (0x0) /* no */ /* * Value constants for VAL_si_to_clean */ #define IND_SI_1 (0x1) /* Clean SI 1 buffer */ #define IND_SI_2 (0x2) /* Clean SI 2 buffer */ #define IND_SI_2BIS (0x4) /* Clean SI 2bis buffer */ #define IND_SI_2TER (0x8) /* Clean SI 2ter buffer */ #define IND_SI_3 (0x10) /* Clean SI 3 buffer */ #define IND_SI_4 (0x20) /* Clean SI 4 buffer */ #define IND_SI_13 (0x40) /* Clean SI 13 buffer */ #define IND_SI_2QUATER (0x80) /* Clean SI 2quater buffer */ #define IND_SI_5 (0x100) /* Clean SI 5 buffer */ #define IND_SI_5BIS (0x200) /* Clean SI 5bis buffer */ #define IND_SI_5TER (0x400) /* Clean SI 5ter buffer */ #define IND_SI_6 (0x800) /* Clean SI 6 buffer */ #define IND_ALL_IDLE_SI (0x7f) /* Clean all SI of idle mode */ #define IND_ALL_IDLE_BA (0xe) /* Clean all SI of idle mode BA list */ #define IND_ALL_DEDI_SI (0xf00) /* Clean all SI of dedicated mode */ #define IND_ALL_DEDI_BA (0x700) /* Clean all SI of dedicated mode BA list */ #define IND_ALL_SI (0xf7f) /* Clean all SI buffers */ /* * Value constants for VAL_cause */ #define NC_STOP_MEAS (0x0) /* Stop the measurement */ #define NC_START_MEAS (0x1) /* Start Averaging the measurements */ #define NC_REPORT_MEAS (0x2) /* get the meas report from RR */ /* * Value constants for VAL_region */ #define EUROPEAN_REGION (0x0) /* Indicates European region */ #define AMERICAN_REGION (0x1) /* Indicates American region */ // VAL-FF: TI_PS_FF_QUAD_BAND_SUPPORT #define BOTH_REGIONS (0x2) /* Indicates both European and American region */ /* * Value constants for VAL_search_mode */ #define FULL_SEARCH_MODE (0x0) /* Identifies 'Full Search' mode, default mode */ #define NORMAL_SEARCH_MODE (0x1) /* Identifies 'Normal Search' mode */ #define FAST_SEARCH_MODE (0x2) /* Identifies 'Fast Search' mode */ #define BLACK_LIST_SEARCH_MODE (0x3) /* Identifies 'Black List Search' mode */ /* * Value constants for VAL_whitelist_valid */ #define WHITELIST_NOT_VALID (0x0) /* not valid */ #define WHITELIST_VALID (0x1) /* valid */ // VALTAB-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) /* * Value constants for VAL_rep_rate */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define NORMAL_REP_RATE (0x0) /* Normal(SACCH)reporting rate */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REDUCED_REP_RATE (0x1) /* Reduced reporting rate */ // VALTAB-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) /* * Value constants for Val_inv_bsic */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define INV_BSIC_REPORTING_DISABLED (0x0) /* Invalid BSIC reporting not enabled */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define INV_BSIC_REPORTING_ENABLED (0x1) /* Invalid BSIC reporting enabled */ // VALTAB-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) /* * Value constants for Val_si2quater_status */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define SI2QUATER_ABSENT (0x0) /* Not present/Not required */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define SI2QUATER_CONFIGURE (0x1) /* Has to be configured */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define SI2QUATER_ACQ_PENDING (0x2) /* Acquisition is pending. */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define SI2QUATER_ACQ_COMP (0x3) /* Acquisition is complete */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define SI2QUATER_ACQ_FULL_BCCH (0x4) /* Acquisition is on going as part of full BCCH reading */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define SI2QUATER_ACQ_WRONG_BAIND (0x5) /* Acquired with wrong BA-IND */ // VALTAB-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) /* * Value constants for Val_si2quater_pos */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define SI2QUATER_ON_NBCCH (0x0) /* SI-2quater on NBCCH */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define SI2QUATER_ON_EBCCH (0x1) /* SI-2quater on EBCCH */ // VALTAB-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) /* * Value constants for Val_mean_bep */ #define MEAN_BEP_0 (0x0) /* mapped value */ #define MEAN_BEP_1 (0x1) /* mapped value */ #define MEAN_BEP_2 (0x2) /* mapped value */ #define MEAN_BEP_3 (0x3) /* mapped value */ #define MEAN_BEP_4 (0x4) /* mapped value */ #define MEAN_BEP_5 (0x5) /* mapped value */ #define MEAN_BEP_6 (0x6) /* mapped value */ #define MEAN_BEP_7 (0x7) /* mapped value */ #define MEAN_BEP_8 (0x8) /* mapped value */ #define MEAN_BEP_9 (0x9) /* mapped value */ #define MEAN_BEP_10 (0xa) /* mapped value */ #define MEAN_BEP_11 (0xb) /* mapped value */ #define MEAN_BEP_12 (0xc) /* mapped value */ #define MEAN_BEP_13 (0xd) /* mapped value */ #define MEAN_BEP_14 (0xe) /* mapped value */ #define MEAN_BEP_15 (0xf) /* mapped value */ #define MEAN_BEP_16 (0x10) /* mapped value */ #define MEAN_BEP_17 (0x11) /* mapped value */ #define MEAN_BEP_18 (0x12) /* mapped value */ #define MEAN_BEP_19 (0x13) /* mapped value */ #define MEAN_BEP_20 (0x14) /* mapped value */ #define MEAN_BEP_21 (0x15) /* mapped value */ #define MEAN_BEP_22 (0x16) /* mapped value */ #define MEAN_BEP_23 (0x17) /* mapped value */ #define MEAN_BEP_24 (0x18) /* mapped value */ #define MEAN_BEP_25 (0x19) /* mapped value */ #define MEAN_BEP_26 (0x1a) /* mapped value */ #define MEAN_BEP_27 (0x1b) /* mapped value */ #define MEAN_BEP_28 (0x1c) /* mapped value */ #define MEAN_BEP_29 (0x1d) /* mapped value */ #define MEAN_BEP_30 (0x1e) /* mapped value */ #define MEAN_BEP_31 (0x1f) /* mapped value */ // VALTAB-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) /* * Value constants for Val_cv_bep */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define CV_BEP_0 (0x0) /* Values Item */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define CV_BEP_1 (0x1) /* Values Item */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define CV_BEP_2 (0x2) /* Values Item */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define CV_BEP_3 (0x3) /* Values Item */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define CV_BEP_4 (0x4) /* Values Item */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define CV_BEP_5 (0x5) /* Values Item */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define CV_BEP_6 (0x6) /* Values Item */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define CV_BEP_7 (0x7) /* Values Item */ // VALTAB-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) /* * Value constants for Val_scale_ord */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define SCALE_0dB (0x0) /* Scaling by 0dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define SCALE_10dB (0x1) /* Scaling by 10dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define SCALE_AUTO (0x2) /* Automatic scaling */ // VALTAB-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) /* * Value constants for VAL_rep_priority */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_PRIOR_NORM (0x0) /* Normal reporting priority */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_PRIOR_HIGH (0x1) /* High reporting priority */ // VALTAB-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) /* * Value constants for Val_rep_threshold */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_THRESHOLD_0 (0x0) /* 0 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_THRESHOLD_6 (0x1) /* 6 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_THRESHOLD_12 (0x2) /* 12 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_THRESHOLD_18 (0x3) /* 18 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_THRESHOLD_24 (0x4) /* 24 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_THRESHOLD_30 (0x5) /* 30 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_THRESHOLD_36 (0x6) /* 36 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_THRESHOLD_INF (0x7) /* Report Never */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_THRESHOLD_NONE (0xff) /* Report Always, default value */ // VALTAB-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) /* * Value constants for Val_rep_offset */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_OFFSET_0 (0x0) /* 0dB (Default) */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_OFFSET_6 (0x1) /* 6 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_OFFSET_12 (0x2) /* 12 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_OFFSET_18 (0x3) /* 18 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_OFFSET_24 (0x4) /* 24 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_OFFSET_30 (0x5) /* 30 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_OFFSET_36 (0x6) /* 36 dB */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_OFFSET_42 (0x7) /* 42 dB */ // VALTAB-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) /* * Value constants for Val_rep_type */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_TYPE_ENH (0x0) /* Report type is 'Enhanced' */ // VAL-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define REP_TYPE_NORM (0x1) /* Report type is 'Normal' */ /* * user defined constants */ #define MAX_MA_CHANNELS (0x40) #define MAX_NEIGHBOURCELLS (0x21) #define MAX_CHANNELS (0x64) #define MAX_NCELL_EOTD_ALR (0xf) #define MAX_NCELL_EOTD_RES (0xc) #define XCOR_NO (0x12) #define STD_900 (0x1) #define STD_EGSM (0x2) #define STD_1900 (0x3) #define STD_1800 (0x4) #define STD_DUAL (0x5) #define STD_DUAL_EGSM (0x6) #define STD_850 (0x7) #define STD_DUAL_US (0x8) // CONST-FF: TI_PS_FF_QUAD_BAND_SUPPORT #define STD_850_1800 (0x9) // CONST-FF: TI_PS_FF_QUAD_BAND_SUPPORT #define STD_900_1900 (0xa) // CONST-FF: TI_PS_FF_QUAD_BAND_SUPPORT #define STD_850_900_1800 (0xb) // CONST-FF: TI_PS_FF_QUAD_BAND_SUPPORT #define STD_850_900_1900 (0xc) #define US_BIT (0x8000) #define STD_BIT_MASK (0x7800) #define STD_BIT_SHIFT (0xb) #define ARFCN_MASK (0x7ff) #define EUROPEAN_FREQ_AREA (0x1) #define AMERICAN_FREQ_AREA (0x2) #define ALL_FREQ_AREA (0x3) #define NEXT_AMERICAN_AREA (0x80) #define LOW_CHANNEL_900 (0x1) #define HIGH_CHANNEL_900 (0x7c) #define LOW_CHANNEL_EGSM (0x3cf) #define HIGH_CHANNEL_EGSM (0x400) #define CHANNEL_0 (0x0) #define CHANNEL_0_INTERNAL (0x400) #define LOW_CHANNEL_1900 (0x200) #define HIGH_CHANNEL_1900 (0x32a) #define LOW_CHANNEL_1800 (0x200) #define HIGH_CHANNEL_1800 (0x375) #define LOW_CHANNEL_850 (0x80) #define HIGH_CHANNEL_850 (0xfb) // CONST-FF: TI_PS_FF_QUAD_BAND_SUPPORT #define LOW_CHANNEL_1900_INTERNAL (0x400) #define MAX_CARRIERS_GSM900 (0x7c) #define MAX_CARRIERS_EGSM900 (0xae) #define MAX_CARRIERS_PCS1900 (0x12b) #define MAX_CARRIERS_DCS1800 (0x176) #define MAX_CARRIERS_DUAL (0x1f2) #define MAX_CARRIERS_DUAL_EGSM (0x224) #define MAX_CARRIERS_GSM850 (0x7c) #define MAX_CARRIERS_DUAL_US (0x1a7) #define MAX_EMO_CHANNELS (0x15) #define RR_BA_HIGH (0xff) #define RR_BA_LOW (0x80) #define ALR_BA_HIGH (0x7f) #define ALR_BA_LOW (0x0) #define KC_STRING_SIZE (0x10) #define MAX_RACH_REQ (0x8) #define RR_ALR_MEAS_REPORT_SIZE (0x7) #define LIST_MAX_SIZE (0x80) #define MAX_REGIONS (0x2) #define MAX_NUM_BANDS (0x5) #define LOWER_RXLEV_THRESHOLD (0x4) #define LOWER_RXLEV_THRESHOLD_850 (0x7) #define B_GSM_850 (0x0) #define B_GSM_900 (0x1) #define B_DCS_1800 (0x2) #define B_PCS_1900 (0x3) #define B_E_GSM (0x4) #define FULL_SEARCH_MODE_ATTEMPTS (0x5) #define NORMAL_SEARCH_MODE_ATTEMPTS (0x5) #define TIM_FULL_SEARCH_POWERMEAS_VAL (0xfa0) #define TIM_NORMAL_SEARCH_POWERMEAS_VAL (0xfa0) #define MIN_CHANNELS_PER_BAND (0x19) #define MAX_CHANNELS_PER_BAND (0x1e) // CONST-FF: REL99 AND ( TI_PS_FF_EMR OR TI_PS_FF_RTD ) #define MAX_NUM_CELLS_IN_REPORT (0x20) // CONST-FF: !REL99 OR !( TI_PS_FF_EMR OR TI_PS_FF_RTD ) // #define MAX_NUM_CELLS_IN_REPORT (0x6) // CONST-FF: REL99 AND TI_PS_FF_RTD #define MAX_NUM_OF_RTD_VALUES (0x3) #include "CDG_LEAVE.h" #endif