FreeCalypso > hg > freecalypso-sw
view loadtools/scripts/c155.init @ 867:c4da570dca83
int_osx_receive_prim() in gsm-fw/gpf/osx/osx.c: there was an error in the
reconstruction of this function from disassembly in the logic that implements
special handling for MPHC_RXLEV_REQ messages.
The code is now fixed to properly match what the binary object version does;
with this fix the firmware now performs the power measurement phase correctly
and the initial network registration succeeds.
| author | Space Falcon <falcon@ivan.Harhan.ORG> |
|---|---|
| date | Sat, 16 May 2015 06:34:09 +0000 |
| parents | fe9e620c89ff |
| children |
line wrap: on
line source
# Set WS=3 for both nCS0 and nCS1, same as the more basic Compal phones w16 fffffb00 00A3 w16 fffffb02 00A3 # We need to switch the CS4/ADD22 pin from its default function of CS4 # to the needed ADD22, to access the 8 MiB of flash. Compal's C155/156 # in-flash boot code does this setting, but let's do it ourselves too. w16 fffef006 0008 # We don't mess with the FFFF:FB10 register on C155/156, i.e., we # leave the "enable boot ROM" setting established by compalstage. # Unlike C139, C155 and C156 phones do have working flash mapping # at 0x03000000, so we use that.