FreeCalypso > hg > freecalypso-sw
view doc/Freerunner-Howto @ 950:cd34e0d534b9
c139explore: LCD output implemented, does not work
author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
---|---|
date | Wed, 04 Nov 2015 01:43:44 +0000 |
parents | 4fa939eada22 |
children | 7d3f0910aeb2 |
line wrap: on
line source
How to play with FreeCalypso GSM firmware on a Neo Freerunner ============================================================= Aside from the half-source leo2moko fw we produced back in 2013-10 (you can read all about that one at www.freecalypso.org/leo2moko/), we don't have a working free GSM firmware version for the Freerunner yet. What we do have currently is experimental code that can be built into an image that can be flashed into a GTA02 modem - but it doesn't really work yet. If you would like to play with our experimental code on your Neo FR and maybe help us make it work, here are the instructions: 1. Build the firmware in the gtamodem-gsm configuration - see the Compiling document for more details; 2. You should get a flashImage.bin image built; now you need to flash it into your FR's modem. The serial cable method is highly recommended: the only thing you'll be able to do with our current non-working firmware is help us debug it, and the serial cable will be needed for the latter part anyway. 3. Run fc-loadtool the same way you would if you were flashing leo2moko; 4. The actual flash programming commands are a little different because the image is smaller and in a different format: flash erase 0 0x160000 flash program-bin 0 finlink/flashImage.bin The second number in the flash erase command needs to be the size of flashImage.bin rounded up to a multiple of 64 KiB (the flash sector size in the GTA02 modem); 0x160000 is correct for the fw image size as of this writing, but please double-check it yourself before flashing. The 0 argument in the flash program-bin command is the flash offset at which the image should be programmed: it will always be 0 for FreeCalypso flashable fw images for gtamodem and other targets that have the Calypso boot ROM enabled in the hardware. Once you have flashed our experimental fw into your modem, you can power-cycle the modem and see the new fw boot. You should have the serial cable connected, the serial channel enabled from the Freerunner's AP side and either rvtdump or rvinterf running on your PC or other development machine when you first power your modem up with the experimental fw in it: this way you will see whether the fw boots successfully or crashes. If it does boot without crashing (whether or not it does seems to depend on some factors which we have yet to understand), you will get an AT command interface on the other UART going to the Freerunner's AP - now go ahead and play from there. :) To reflash your modem back to stable and working leo2moko aka moko12, execute the following fc-loadtool commands: flash erase 0 0x230000 flash program-m0 leo2moko.m0 (Whichever firmware image you are flashing, the flash erase command needs to cover the range of flash sectors this image will occupy. You can erase more sectors up to 0x300000, the "natural" boundary of the flash area where fw images live, but I prefer to erase only the needed number of sectors: it is both faster and imposes less wear on the flash.)