FreeCalypso > hg > freecalypso-sw
view compal-flash-boot-for-fc/README @ 949:df1dccc0ef9c
c139explore: GPIO init and backlight on/off control implemented
author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
---|---|
date | Wed, 04 Nov 2015 00:46:36 +0000 |
parents | 8eb7cb176a70 |
children |
line wrap: on
line source
Compal phones have malicious wiring in their PCBs to disable Calypso's internal boot ROM (nIBOOT input tied high instead of low). Therefore, flash sector 0 must always contain working boot code that allows the possibility of new code download over the headset jack UART, and jumps to the main firmware in the rest of the flash if no such download is taking place. In the absence of such good boot code in flash sector 0 the phone is bricked. Compal's own firmwares for these phones do feature a bootloader just as described, but it has one defect: they put the boundary between the boot code and the main firmware at address 0x2000, but the flash erase unit boundary does not come until 0x10000. Therefore, every time the main fw needs to be reflashed, flash sector 0 has to be erased and reprogrammed, creating a bricking vulnerability. Because Compal's original flash layout does not allow us to reuse their bootloader totally untouched while replacing the main fw, and we'll have to reflash our own version of the boot code at least the first time we reflash a given phone from its official fw to FreeCalypso, we can take the liberty of using a slightly patched version of Compal's boot code - with Compal's official firmwares the bootloader part differs slightly from one fw version to the next anyway. The version of Compal's flash boot code built in this directory is intended to be used with FreeCalypso firmwares. It is based on one of Compal's versions that has no malicious features (no check of flash word 0x2060 and no requirement of "1003" signature in the serially downloaded images at the most inconvenient location), and it has been patched to transfer control to the main fw at 0x10058 instead of 0x20F8, i.e., main fw images are to be flashed at 0x10000 without touching flash sector 0. Interrupt and exception version redirections have also been patched accordingly; the specific interface between the boot code and the main fw now mimics that of TI's TCS211 reference fw.