FreeCalypso > hg > freecalypso-sw
view gsm-fw/serial/init.c @ 970:f46a914c455e
loadtools/CHANGES: changes since loadtools-r2 listed
author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
---|---|
date | Sat, 07 Nov 2015 06:50:06 +0000 |
parents | afceeeb2cba1 |
children |
line wrap: on
line source
#include "../include/config.h" #include "../include/sys_types.h" #include "serialswitch.h" #include <string.h> /* * Serial Configuration set up. */ /* ** One config is: ** {XXX_BT_HCI, // Bluetooth HCI ** XXX_FAX_DATA, // Fax/Data AT-Cmd ** XXX_TRACE, // L1/Riviera Trace Mux ** XXX_TRACE}, // Trace PS ** ** with XXX being DUMMY, UART_IRDA or UART_MODEM */ const T_AppliSerialInfo appli_ser_cfg_info = { /* * Default configuration: set it to the "standard" * 0x0168, unless the RVTMUX serial channel has been * moved to the MODEM UART. */ #if CONFIG_RVTMUX_ON_MODEM {DUMMY_BT_HCI, DUMMY_FAX_DATA, UART_MODEM_TRACE, DUMMY_TRACE}, // 0x0248 #else {DUMMY_BT_HCI, UART_MODEM_FAX_DATA, UART_IRDA_TRACE, DUMMY_TRACE}, // default config = 0x0168 #endif /* number of possible configs */ #ifdef BTEMOBILE 12, // 12 serial config allowed #else // BTEMOBILE 9, // 9 serial config allowed #endif { // Configs with Condat Panel only {DUMMY_BT_HCI, DUMMY_FAX_DATA, DUMMY_TRACE, UART_IRDA_TRACE}, // 0x1048 {DUMMY_BT_HCI, DUMMY_FAX_DATA, DUMMY_TRACE, UART_MODEM_TRACE}, // 0x2048 // Configs with L1/Riviera Trace only {DUMMY_BT_HCI, DUMMY_FAX_DATA, UART_IRDA_TRACE, DUMMY_TRACE}, // 0x0148 {DUMMY_BT_HCI, DUMMY_FAX_DATA, UART_MODEM_TRACE, DUMMY_TRACE}, // 0x0248 // Configs with AT-Cmd only {DUMMY_BT_HCI, UART_MODEM_FAX_DATA, DUMMY_TRACE, DUMMY_TRACE}, // 0x0068 // Configs with Condat Panel and L1/Riviera Trace {DUMMY_BT_HCI, DUMMY_FAX_DATA, UART_MODEM_TRACE, UART_IRDA_TRACE}, // 0x1248 {DUMMY_BT_HCI, DUMMY_FAX_DATA, UART_IRDA_TRACE, UART_MODEM_TRACE}, // 0x2148 // Configs with Condat Panel and AT-Cmd {DUMMY_BT_HCI, UART_MODEM_FAX_DATA, DUMMY_TRACE, UART_IRDA_TRACE}, // 0x1068 #ifdef BTEMOBILE // Configs with L1/Riviera Trace and Bluetooth HCI {UART_IRDA_BT_HCI, DUMMY_FAX_DATA, UART_MODEM_TRACE, DUMMY_TRACE}, // 0x0249 {UART_MODEM_BT_HCI, DUMMY_FAX_DATA, UART_IRDA_TRACE, DUMMY_TRACE}, // 0x014A // Configs with AT-Cmd and Bluetooth HCI {UART_IRDA_BT_HCI, UART_MODEM_FAX_DATA, DUMMY_TRACE, DUMMY_TRACE}, // 0x0069 #endif // BTEMOBILE // Configs with L1/Riviera Trace and AT-Cmd {DUMMY_BT_HCI, UART_MODEM_FAX_DATA, UART_IRDA_TRACE, DUMMY_TRACE} // 0x0168 } }; /* * Init_Serial_Flows * * Performs Serialswitch + related serial data flows initialization. */ void Init_Serial_Flows (void) { #if 1 //(OP_L1_STANDALONE == 0) /* * Initialize Serial Switch module. */ #if ((BOARD==35) || (BOARD == 46)) SER_InitSerialConfig (GC_GetSerialConfig()); #else SER_InitSerialConfig (&appli_ser_cfg_info); #endif /* * Then Initialize the Serial Data Flows and the associated UARTs: * - G2-3 Trace if GSM/GPRS Protocol Stack * - AT-Cmd/Fax & Data Flow * * Layer1/Riviera Trace Flow and Bluetooth HCI Flow are initialized * by the appropriate SW Entities. * * G2-3 Trace => No more Used */ SER_tr_Init(SER_PROTOCOL_STACK, TR_BAUD_38400, NULL); /* * Fax & Data / AT-Command Interpreter Serial Data Flow Initialization */ #if ((BOARD != 35) && (BOARD != 46)) (void) SER_fd_Initialize (); #endif #else /* OP_L1_STANDALONE */ #if (TESTMODE || (TRACE_TYPE==1) || (TRACE_TYPE==2) || (TRACE_TYPE==3) || (TRACE_TYPE==6) || (TRACE_TYPE==7)) #if ((BOARD == 35) || (BOARD == 46)) ser_cfg_info[UA_UART_0] = '0'; #else ser_cfg_info[UA_UART_0] = 'G'; #endif #if (CHIPSET !=15) ser_cfg_info[UA_UART_1] = 'R'; // Riviear Demux on UART MODEM #else ser_cfg_info[UA_UART_0] = 'R'; // Riviear Demux on UART MODEM #endif /* init Uart Modem */ SER_InitSerialConfig (&appli_ser_cfg_info); #if TESTMODE || (TRACE_TYPE == 1) || (TRACE_TYPE == 7) SER_tr_Init (SER_LAYER_1, TR_BAUD_115200, rvt_activate_RX_HISR); rvt_register_id("OTHER",&trace_id,(RVT_CALLBACK_FUNC)NULL); #else SER_tr_Init (SER_LAYER_1, TR_BAUD_38400, NULL); #endif L1_trace_string(" \n\r"); #endif /* TRACE_TYPE */ #endif /* OP_L1_STANDALONE */ }