freecalypso-sw: revision graph

graph

less more | rev 155: (0) -120 +120 tip

gsm-fw/bsp/Makefile: abb+spi hooked into the build
Sun, 17 Nov 2013 06:08:47 +0000, by Michael Spacefalcon
abb.c compiles!
Sun, 17 Nov 2013 05:53:10 +0000, by Michael Spacefalcon
tpudrv*.h headers imported
Sun, 17 Nov 2013 05:10:06 +0000, by Michael Spacefalcon
l1_rf<N>.h headers preened
Sun, 17 Nov 2013 04:59:55 +0000, by Michael Spacefalcon
more L1 header files brought in
Sun, 17 Nov 2013 04:50:45 +0000, by Michael Spacefalcon
integrating more L1 header files needed by the abb+spi code
Sat, 16 Nov 2013 20:55:06 +0000, by Michael Spacefalcon
gsm-fw/bsp/abb+spi: preening of header files, first pass
Sat, 16 Nov 2013 19:41:30 +0000, by Michael Spacefalcon
gsm-fw/bsp/abb+spi: initial import from the Leonardo TCS211 version
Sat, 16 Nov 2013 19:03:37 +0000, by Michael Spacefalcon
gsm-fw: sprintf %f: handle infinities and NaNs
Thu, 14 Nov 2013 19:16:38 +0000, by Michael Spacefalcon
gsm-fw/sprintf: %f implemented, debug output looks correct
Thu, 14 Nov 2013 19:03:52 +0000, by Michael Spacefalcon
gsm-fw: sprintf overhaul in preparation for adding %f format support
Thu, 14 Nov 2013 17:51:33 +0000, by Michael Spacefalcon
gsm-fw/nucleus/tc[di].c: minor cleanup
Tue, 12 Nov 2013 16:57:08 +0000, by Michael Spacefalcon
Our nuc-fw is destined to become gsm-fw, so I went ahead and did the big hg mv
Tue, 12 Nov 2013 05:35:48 +0000, by Michael Spacefalcon
fw build for pirelli: set the ASIC_CONF register like the original fw does
Tue, 12 Nov 2013 05:00:00 +0000, by Michael Spacefalcon
k5a3281.init (for GTA0x): set WS=3 for nCS0 like the official firmware does
Tue, 12 Nov 2013 04:53:30 +0000, by Michael Spacefalcon
pirelli.init: go ahead and switch to 812500 baud automatically
Mon, 11 Nov 2013 11:06:50 +0000, by Michael Spacefalcon
fc-xram: print one '.' for every 100 S-records
Mon, 11 Nov 2013 10:46:19 +0000, by Michael Spacefalcon
nuc-fw cleanup: old Nucleus demo (w/o TI fw framework) moved out of the way
Mon, 11 Nov 2013 10:17:08 +0000, by Michael Spacefalcon
RV bring-up: RVT "system time" heartbeat messages now get printed every 20 s!
Mon, 11 Nov 2013 09:56:23 +0000, by Michael Spacefalcon
RV bring-up: lack of timer ticks fixed,
Mon, 04 Nov 2013 23:35:11 +0000, by Michael Spacefalcon
fc-xram: execvp of secondary program implemented
Sun, 03 Nov 2013 00:14:40 +0000, by Michael Spacefalcon
rvtdump: time-stamped logging implemented
Sat, 02 Nov 2013 23:15:42 +0000, by Michael Spacefalcon
rvtdump: some restructuring
Sat, 02 Nov 2013 22:24:14 +0000, by Michael Spacefalcon
nuc-fw: switched from nucdemo to Riviera, got some serial output
Sat, 02 Nov 2013 01:48:11 +0000, by Michael Spacefalcon
nuc-fw: sans-GSM tick timer and Init_Unmask_IT() implemented
Fri, 01 Nov 2013 22:59:49 +0000, by Michael Spacefalcon
nuc-fw: final preparations for the big transition
Fri, 01 Nov 2013 08:03:23 +0000, by Michael Spacefalcon
Riviera should be ready for the first TI fw build attempt
Fri, 01 Nov 2013 06:13:58 +0000, by Michael Spacefalcon
nuc-fw: more minor preparations for the big transition
Fri, 01 Nov 2013 01:31:39 +0000, by Michael Spacefalcon
rvtdump: satisfactory handling of output from Pirelli's fw
Thu, 31 Oct 2013 23:08:59 +0000, by Michael Spacefalcon
rvtdump utility written, compiles
Thu, 31 Oct 2013 19:59:16 +0000, by Michael Spacefalcon
target-utils command input: don't emit BEL on error conditions
Thu, 31 Oct 2013 07:15:32 +0000, by Michael Spacefalcon
fc-[ix]ram: tty pass-thru mode made binary-safe
Thu, 31 Oct 2013 06:56:31 +0000, by Michael Spacefalcon
riviera hooked into nuc-fw build
Thu, 31 Oct 2013 05:50:06 +0000, by Michael Spacefalcon
RVT compiles
Thu, 31 Oct 2013 04:37:17 +0000, by Michael Spacefalcon
RVM compiles
Thu, 31 Oct 2013 00:55:14 +0000, by Michael Spacefalcon
All of RVF compiles
Thu, 31 Oct 2013 00:17:12 +0000, by Michael Spacefalcon
starting to compile RVF
Wed, 30 Oct 2013 23:19:21 +0000, by Michael Spacefalcon
checking in Riviera code from the Sotomodem version
Tue, 29 Oct 2013 07:03:45 +0000, by Michael Spacefalcon
nuc-fw: low-level serial code should be complete
Mon, 28 Oct 2013 07:35:47 +0000, by Michael Spacefalcon
started integrating TI's serial code
Mon, 28 Oct 2013 06:49:44 +0000, by Michael Spacefalcon
nuc-fw: Init_Target() reconstructed
Sun, 27 Oct 2013 04:43:04 +0000, by Michael Spacefalcon
nuc-fw: continuing lowest-level BSP integration
Thu, 24 Oct 2013 02:47:14 +0000, by Michael Spacefalcon
nuc-fw/bsp: niq32.c compiles
Sun, 20 Oct 2013 21:12:41 +0000, by Michael Spacefalcon
nuc-fw/bsp: niq32.c and sim.h replaced with new versions
Sun, 20 Oct 2013 08:43:41 +0000, by Michael Spacefalcon
nuc-fw/bsp: more reconciliation
Sun, 20 Oct 2013 07:58:00 +0000, by Michael Spacefalcon
nuc-fw/bsp: per-target ARMIO init implemented
Sun, 20 Oct 2013 07:04:15 +0000, by Michael Spacefalcon
nuc-fw/bsp: beginning of reconciliation with the Leonardo semi-src version
Sat, 19 Oct 2013 18:59:34 +0000, by Michael Spacefalcon
target-utils/Makefile: make clean: support for subset packaging
Fri, 13 Sep 2013 17:00:09 +0000, by Michael Spacefalcon
loadtools/README: documentation for loadtools should now be complete
Fri, 13 Sep 2013 16:47:09 +0000, by Michael Spacefalcon
fc-loadtool program-{m0,srec}: more usable progress indication
Wed, 11 Sep 2013 17:58:55 +0000, by Michael Spacefalcon
fc-loadtool help implemented
Tue, 03 Sep 2013 07:31:26 +0000, by Michael Spacefalcon
pirexplore: approaching sanity with the LCD
Mon, 02 Sep 2013 03:07:07 +0000, by Michael Spacefalcon
target-utils/libmpffs: minor refactoring, read into RAM implemented
Mon, 02 Sep 2013 01:28:11 +0000, by Michael Spacefalcon
pirexplore FFS: buglet fixed, works now
Mon, 02 Sep 2013 00:41:18 +0000, by Michael Spacefalcon
pirexplore: FFS find command implemented
Mon, 02 Sep 2013 00:33:54 +0000, by Michael Spacefalcon
pirexplore: beginning of FFS support
Sun, 01 Sep 2013 21:55:51 +0000, by Michael Spacefalcon
fc-loadtool: flash program-{m0,srec} implemented
Sun, 01 Sep 2013 18:59:48 +0000, by Michael Spacefalcon
fc-loadtool dump2srec: decorate the SREC output file with S0 and S7 records
Sun, 01 Sep 2013 17:20:58 +0000, by Michael Spacefalcon
some README files added
Sun, 01 Sep 2013 12:54:42 +0000, by Michael Spacefalcon
fc-loadtool: GTA0x flash support
Sun, 01 Sep 2013 04:18:32 +0000, by Michael Spacefalcon
fc-loadtool flash program-bin: smarter progress indication
Sun, 01 Sep 2013 03:42:11 +0000, by Michael Spacefalcon
fc-loadtool dump2{bin,srec}: smarter progress indication
Sun, 01 Sep 2013 01:33:28 +0000, by Michael Spacefalcon
nuc-fw: beginning to integrate TI's BSP code
Sat, 31 Aug 2013 23:43:23 +0000, by Michael Spacefalcon
nuc-fw config: ld script generation implemented
Sun, 25 Aug 2013 21:20:20 +0000, by Michael Spacefalcon
nuc-fw config: export_to_*(): catch multiple exports of the same setting
Sun, 25 Aug 2013 20:13:24 +0000, by Michael Spacefalcon
nuc-fw: cheezy config.sh hand-holding script created
Sun, 25 Aug 2013 19:27:40 +0000, by Michael Spacefalcon
nuc-fw: configuration mechanism hooked into the top level Makefile
Sun, 25 Aug 2013 19:05:51 +0000, by Michael Spacefalcon
nuc-fw: beginning of the configuration mechanism
Fri, 23 Aug 2013 02:02:59 +0000, by Michael Spacefalcon
nuc-fw: fixed .section and .align assembly directives
Thu, 22 Aug 2013 18:53:27 +0000, by Michael Spacefalcon
loadtools/scripts: hw configuration for GTA02
Tue, 20 Aug 2013 07:02:36 +0000, by Michael Spacefalcon
loadtools for GTA0x AP: GTA02 modem power-off implemented
Tue, 20 Aug 2013 05:14:45 +0000, by Michael Spacefalcon
loadtools: support building for GTA0x AP
Tue, 20 Aug 2013 04:51:15 +0000, by Michael Spacefalcon
toolchain: binutils patch to emit the "short" form of Thumb->ARM call veneers
Mon, 19 Aug 2013 05:16:34 +0000, by Michael Spacefalcon
nuc-fw: building XIP code in Thumb as intended
Sat, 17 Aug 2013 19:29:48 +0000, by Michael Spacefalcon
nuc-fw: ramImage.srec built, nucdemo runs
Fri, 16 Aug 2013 20:14:01 +0000, by Michael Spacefalcon
nuc-fw: links to an ELF image
Fri, 16 Aug 2013 02:25:58 +0000, by Michael Spacefalcon
beginning of nuc-fw
Sun, 11 Aug 2013 07:17:25 +0000, by Michael Spacefalcon
pirexplore: lcdfill implemented
Thu, 01 Aug 2013 02:27:09 +0000, by Michael Spacefalcon
pirexplore: LCD init and BL control work now
Thu, 01 Aug 2013 00:57:49 +0000, by Michael Spacefalcon
pirexplore: finally got the backlight to turn on
Thu, 01 Aug 2013 00:26:29 +0000, by Michael Spacefalcon
target-utils: pirexplore added to top level Makefile
Sun, 28 Jul 2013 01:30:22 +0000, by Michael Spacefalcon
pirexplore: attempt to play with SPCA552E
Sat, 27 Jul 2013 07:30:08 +0000, by Michael Spacefalcon
pirexplore: added rtccomp command to read RTC compensation registers
Fri, 26 Jul 2013 21:12:03 +0000, by Michael Spacefalcon
pirexplore: RTC read implemented
Fri, 26 Jul 2013 20:32:43 +0000, by Michael Spacefalcon
dieid via fc-loadtool: added ability to save to a file
Fri, 26 Jul 2013 18:11:41 +0000, by Michael Spacefalcon
dieid implemented in fc-loadtool as well
Fri, 26 Jul 2013 17:51:49 +0000, by Michael Spacefalcon
pirexplore: dieid command implemented
Fri, 26 Jul 2013 06:41:24 +0000, by Michael Spacefalcon
pirexplore: XRAM/flash access init like in the pirelli.init script
Fri, 26 Jul 2013 05:33:33 +0000, by Michael Spacefalcon
pirexplore utility started
Fri, 26 Jul 2013 04:57:03 +0000, by Michael Spacefalcon
fc-loadtool flash program-bin command: forgot to print progress dots
Sat, 29 Jun 2013 15:21:55 +0000, by Michael Spacefalcon
fc-loadtool: flash program-bin command implemented, compiles
Fri, 28 Jun 2013 21:12:22 +0000, by Michael Spacefalcon
fc-loadtool: "quick program" command implemented
Fri, 28 Jun 2013 04:49:09 +0000, by Michael Spacefalcon
loadagent: AMD flash write implemented
Thu, 27 Jun 2013 23:22:25 +0000, by Michael Spacefalcon
fc-loadtool: flash erase implemented, compiles
Thu, 27 Jun 2013 04:56:17 +0000, by Michael Spacefalcon
fc-loadtool flash support: sector table generation implemented
Mon, 24 Jun 2013 17:46:15 +0000, by Michael Spacefalcon
fc-loadtool: flash blankchk implemented
Mon, 24 Jun 2013 07:29:53 +0000, by Michael Spacefalcon
defined flash configuration for the Pirelli
Mon, 24 Jun 2013 06:40:55 +0000, by Michael Spacefalcon
fc-loadtool: started flash/flash2 command implementation
Mon, 24 Jun 2013 06:30:57 +0000, by Michael Spacefalcon
loadtools old buglet: off by 1 error in the max-arguments logic in cmd parsing
Mon, 24 Jun 2013 05:24:19 +0000, by Michael Spacefalcon
fc-loadtool flash: total_size logic implemented
Sun, 23 Jun 2013 20:50:41 +0000, by Michael Spacefalcon
loadtools: started laying the foundation for flash support
Sun, 23 Jun 2013 20:13:59 +0000, by Michael Spacefalcon
loadtools: made the baud command available in init-script for fc-xram
Sun, 23 Jun 2013 05:47:17 +0000, by Michael Spacefalcon
fc-xram: baud rate switching implemented per original intent
Sun, 23 Jun 2013 05:16:47 +0000, by Michael Spacefalcon
fc-loadtool: fast-baud communication with loadagent implemented, works!
Sun, 23 Jun 2013 04:34:22 +0000, by Michael Spacefalcon
loadtools: -b option works in fc-loadtool
Sun, 23 Jun 2013 03:38:09 +0000, by Michael Spacefalcon
loadtools: -b option works in fc-iram
Sun, 23 Jun 2013 03:32:04 +0000, by Michael Spacefalcon
loadtools: first beginnings for the baud rate switching logic
Sun, 23 Jun 2013 02:53:16 +0000, by Michael Spacefalcon
fc-sertool renamed to fc-iram
Sun, 23 Jun 2013 01:13:03 +0000, by Michael Spacefalcon
toolchain: -mthumb-interwork multilib enabled, matching OsmocomBB's version
Sat, 22 Jun 2013 23:36:22 +0000, by Michael Spacefalcon
finally, a real make install for loadtools and loadagent
Wed, 19 Jun 2013 06:41:08 +0000, by Michael Spacefalcon
init-script logic implemented in fc-xram
Mon, 17 Jun 2013 08:15:30 +0000, by Michael Spacefalcon
fc-xram: cosmetic fix
Mon, 17 Jun 2013 07:32:29 +0000, by Michael Spacefalcon
loadagent: buglet in the ML command was breaking fc-xram; fixed
Mon, 17 Jun 2013 07:28:51 +0000, by Michael Spacefalcon
fc-xram tool written, compiles, now needs to be debugged
Mon, 17 Jun 2013 07:18:04 +0000, by Michael Spacefalcon
loadagent stack bottom moved to 0x81FFFC: be friendly to chain-loading
Sun, 16 Jun 2013 07:31:23 +0000, by Michael Spacefalcon
loadagent: ML command (support for fc-chainload) implemented
Mon, 13 May 2013 22:59:08 +0000, by Michael Spacefalcon
loadagent: blankchk command implemented
Mon, 13 May 2013 20:51:04 +0000, by Michael Spacefalcon
target-utils top level Makefile buglet
Mon, 13 May 2013 20:40:44 +0000, by Michael Spacefalcon
loadagent: baud rate switching implemented
Mon, 13 May 2013 06:56:54 +0000, by Michael Spacefalcon
loadtool: dump2bin and dump2srec implemented
Mon, 06 May 2013 02:04:56 +0000, by Michael Spacefalcon

less more | rev 155: (0) -120 +120 tip

FreeCalypso > hg > freecalypso-sw

graph