FreeCalypso > hg > freecalypso-sw
graph
-
Our nuc-fw is destined to become gsm-fw, so I went ahead and did the big hg mv2013-11-12, by Michael Spacefalcon
-
fw build for pirelli: set the ASIC_CONF register like the original fw does2013-11-12, by Michael Spacefalcon
-
k5a3281.init (for GTA0x): set WS=3 for nCS0 like the official firmware does2013-11-12, by Michael Spacefalcon
-
pirelli.init: go ahead and switch to 812500 baud automatically2013-11-11, by Michael Spacefalcon
-
fc-xram: print one '.' for every 100 S-records2013-11-11, by Michael Spacefalcon
-
nuc-fw cleanup: old Nucleus demo (w/o TI fw framework) moved out of the way2013-11-11, by Michael Spacefalcon
-
RV bring-up: RVT "system time" heartbeat messages now get printed every 20 s!2013-11-11, by Michael Spacefalcon
-
RV bring-up: lack of timer ticks fixed,2013-11-04, by Michael Spacefalcon
-
fc-xram: execvp of secondary program implemented2013-11-03, by Michael Spacefalcon
-
rvtdump: time-stamped logging implemented2013-11-02, by Michael Spacefalcon
-
rvtdump: some restructuring2013-11-02, by Michael Spacefalcon
-
nuc-fw: switched from nucdemo to Riviera, got some serial output2013-11-02, by Michael Spacefalcon
-
nuc-fw: sans-GSM tick timer and Init_Unmask_IT() implemented2013-11-01, by Michael Spacefalcon
-
nuc-fw: final preparations for the big transition2013-11-01, by Michael Spacefalcon
-
Riviera should be ready for the first TI fw build attempt2013-11-01, by Michael Spacefalcon
-
nuc-fw: more minor preparations for the big transition2013-11-01, by Michael Spacefalcon
-
rvtdump: satisfactory handling of output from Pirelli's fw2013-10-31, by Michael Spacefalcon
-
rvtdump utility written, compiles2013-10-31, by Michael Spacefalcon
-
target-utils command input: don't emit BEL on error conditions2013-10-31, by Michael Spacefalcon
-
fc-[ix]ram: tty pass-thru mode made binary-safe2013-10-31, by Michael Spacefalcon
-
riviera hooked into nuc-fw build2013-10-31, by Michael Spacefalcon
-
RVT compiles2013-10-31, by Michael Spacefalcon
-
RVM compiles2013-10-31, by Michael Spacefalcon
-
All of RVF compiles2013-10-31, by Michael Spacefalcon
-
starting to compile RVF2013-10-30, by Michael Spacefalcon
-
checking in Riviera code from the Sotomodem version2013-10-29, by Michael Spacefalcon
-
nuc-fw: low-level serial code should be complete2013-10-28, by Michael Spacefalcon
-
started integrating TI's serial code2013-10-28, by Michael Spacefalcon
-
nuc-fw: Init_Target() reconstructed2013-10-27, by Michael Spacefalcon
-
nuc-fw: continuing lowest-level BSP integration2013-10-24, by Michael Spacefalcon
-
nuc-fw/bsp: niq32.c compiles2013-10-20, by Michael Spacefalcon
-
nuc-fw/bsp: niq32.c and sim.h replaced with new versions2013-10-20, by Michael Spacefalcon
-
nuc-fw/bsp: more reconciliation2013-10-20, by Michael Spacefalcon
-
nuc-fw/bsp: per-target ARMIO init implemented2013-10-20, by Michael Spacefalcon
-
nuc-fw/bsp: beginning of reconciliation with the Leonardo semi-src version2013-10-19, by Michael Spacefalcon
-
target-utils/Makefile: make clean: support for subset packaging2013-09-13, by Michael Spacefalcon
-
loadtools/README: documentation for loadtools should now be complete2013-09-13, by Michael Spacefalcon
-
fc-loadtool program-{m0,srec}: more usable progress indication2013-09-11, by Michael Spacefalcon
-
fc-loadtool help implemented2013-09-03, by Michael Spacefalcon
-
pirexplore: approaching sanity with the LCD2013-09-02, by Michael Spacefalcon
-
target-utils/libmpffs: minor refactoring, read into RAM implemented2013-09-02, by Michael Spacefalcon
-
pirexplore FFS: buglet fixed, works now2013-09-02, by Michael Spacefalcon
-
pirexplore: FFS find command implemented2013-09-02, by Michael Spacefalcon
-
pirexplore: beginning of FFS support2013-09-01, by Michael Spacefalcon
-
fc-loadtool: flash program-{m0,srec} implemented2013-09-01, by Michael Spacefalcon
-
fc-loadtool dump2srec: decorate the SREC output file with S0 and S7 records2013-09-01, by Michael Spacefalcon
-
some README files added2013-09-01, by Michael Spacefalcon
-
fc-loadtool: GTA0x flash support2013-09-01, by Michael Spacefalcon
-
fc-loadtool flash program-bin: smarter progress indication2013-09-01, by Michael Spacefalcon
-
fc-loadtool dump2{bin,srec}: smarter progress indication2013-09-01, by Michael Spacefalcon
-
nuc-fw: beginning to integrate TI's BSP code2013-08-31, by Michael Spacefalcon
-
nuc-fw config: ld script generation implemented2013-08-25, by Michael Spacefalcon
-
nuc-fw config: export_to_*(): catch multiple exports of the same setting2013-08-25, by Michael Spacefalcon
-
nuc-fw: cheezy config.sh hand-holding script created2013-08-25, by Michael Spacefalcon
-
nuc-fw: configuration mechanism hooked into the top level Makefile2013-08-25, by Michael Spacefalcon
-
nuc-fw: beginning of the configuration mechanism2013-08-23, by Michael Spacefalcon
-
nuc-fw: fixed .section and .align assembly directives2013-08-22, by Michael Spacefalcon
-
loadtools/scripts: hw configuration for GTA022013-08-20, by Michael Spacefalcon
-
loadtools for GTA0x AP: GTA02 modem power-off implemented2013-08-20, by Michael Spacefalcon
-
loadtools: support building for GTA0x AP2013-08-20, by Michael Spacefalcon
-
toolchain: binutils patch to emit the "short" form of Thumb->ARM call veneers2013-08-19, by Michael Spacefalcon
-
nuc-fw: building XIP code in Thumb as intended2013-08-17, by Michael Spacefalcon
-
nuc-fw: ramImage.srec built, nucdemo runs2013-08-16, by Michael Spacefalcon
-
nuc-fw: links to an ELF image2013-08-16, by Michael Spacefalcon
-
beginning of nuc-fw2013-08-11, by Michael Spacefalcon
-
pirexplore: lcdfill implemented2013-08-01, by Michael Spacefalcon
-
pirexplore: LCD init and BL control work now2013-08-01, by Michael Spacefalcon
-
pirexplore: finally got the backlight to turn on2013-08-01, by Michael Spacefalcon
-
target-utils: pirexplore added to top level Makefile2013-07-28, by Michael Spacefalcon
-
pirexplore: attempt to play with SPCA552E2013-07-27, by Michael Spacefalcon
-
pirexplore: added rtccomp command to read RTC compensation registers2013-07-26, by Michael Spacefalcon
-
pirexplore: RTC read implemented2013-07-26, by Michael Spacefalcon
-
dieid via fc-loadtool: added ability to save to a file2013-07-26, by Michael Spacefalcon
-
dieid implemented in fc-loadtool as well2013-07-26, by Michael Spacefalcon
-
pirexplore: dieid command implemented2013-07-26, by Michael Spacefalcon
-
pirexplore: XRAM/flash access init like in the pirelli.init script2013-07-26, by Michael Spacefalcon
-
pirexplore utility started2013-07-26, by Michael Spacefalcon
-
fc-loadtool flash program-bin command: forgot to print progress dots2013-06-29, by Michael Spacefalcon
-
fc-loadtool: flash program-bin command implemented, compiles2013-06-28, by Michael Spacefalcon
-
fc-loadtool: "quick program" command implemented2013-06-28, by Michael Spacefalcon
-
loadagent: AMD flash write implemented2013-06-27, by Michael Spacefalcon
-
fc-loadtool: flash erase implemented, compiles2013-06-27, by Michael Spacefalcon
-
fc-loadtool flash support: sector table generation implemented2013-06-24, by Michael Spacefalcon
-
fc-loadtool: flash blankchk implemented2013-06-24, by Michael Spacefalcon
-
defined flash configuration for the Pirelli2013-06-24, by Michael Spacefalcon
-
fc-loadtool: started flash/flash2 command implementation2013-06-24, by Michael Spacefalcon
-
loadtools old buglet: off by 1 error in the max-arguments logic in cmd parsing2013-06-24, by Michael Spacefalcon
-
fc-loadtool flash: total_size logic implemented2013-06-23, by Michael Spacefalcon
-
loadtools: started laying the foundation for flash support2013-06-23, by Michael Spacefalcon
-
loadtools: made the baud command available in init-script for fc-xram2013-06-23, by Michael Spacefalcon
-
fc-xram: baud rate switching implemented per original intent2013-06-23, by Michael Spacefalcon
-
fc-loadtool: fast-baud communication with loadagent implemented, works!2013-06-23, by Michael Spacefalcon
-
loadtools: -b option works in fc-loadtool2013-06-23, by Michael Spacefalcon
-
loadtools: -b option works in fc-iram2013-06-23, by Michael Spacefalcon
-
loadtools: first beginnings for the baud rate switching logic2013-06-23, by Michael Spacefalcon
-
fc-sertool renamed to fc-iram2013-06-23, by Michael Spacefalcon
-
toolchain: -mthumb-interwork multilib enabled, matching OsmocomBB's version2013-06-22, by Michael Spacefalcon
-
finally, a real make install for loadtools and loadagent2013-06-19, by Michael Spacefalcon
-
init-script logic implemented in fc-xram2013-06-17, by Michael Spacefalcon
-
fc-xram: cosmetic fix2013-06-17, by Michael Spacefalcon
-
loadagent: buglet in the ML command was breaking fc-xram; fixed2013-06-17, by Michael Spacefalcon
-
fc-xram tool written, compiles, now needs to be debugged2013-06-17, by Michael Spacefalcon
-
loadagent stack bottom moved to 0x81FFFC: be friendly to chain-loading2013-06-16, by Michael Spacefalcon
-
loadagent: ML command (support for fc-chainload) implemented2013-05-13, by Michael Spacefalcon
-
loadagent: blankchk command implemented2013-05-13, by Michael Spacefalcon
-
target-utils top level Makefile buglet2013-05-13, by Michael Spacefalcon
-
loadagent: baud rate switching implemented2013-05-13, by Michael Spacefalcon
-
loadtool: dump2bin and dump2srec implemented2013-05-06, by Michael Spacefalcon
-
loadtool: preparations for dump2bin and dump2srec2013-05-05, by Michael Spacefalcon
-
loadagent: crc32 command implemented2013-05-04, by Michael Spacefalcon
-
CRC-32 table, will be used for flash dump integrity checks2013-05-04, by Michael Spacefalcon
-
Pirelli ADD22 configuration2013-05-04, by Michael Spacefalcon
-
loadtool scripting: cosmetic buglet2013-05-04, by Michael Spacefalcon
-
loadtools: install target added2013-05-04, by Michael Spacefalcon
-
loadtool: scripting functionality implemented2013-05-04, by Michael Spacefalcon
-
loadtool: default exit mode setting implemented2013-05-04, by Michael Spacefalcon
-
loadtool: exit jump0 implemented2013-05-04, by Michael Spacefalcon
-
loadagent: jump command implemented2013-05-04, by Michael Spacefalcon
-
target-utils: top-level Makefile created like in the Book-E-MON and2013-05-04, by Michael Spacefalcon
-
loadagent buglet in the memory dump command argument parsing2013-05-04, by Michael Spacefalcon
-
loadtool: initial version compiles and links2013-05-04, by Michael Spacefalcon
-
loadtool coming along2013-05-04, by Michael Spacefalcon
-
starting work on loadtool2013-05-04, by Michael Spacefalcon
-
helloapp isn't quite loadagent2013-05-04, by Michael Spacefalcon
-
loadagent built with memory dump commands2013-05-04, by Michael Spacefalcon
-
loadtool hw configuration files created for the Pirelli2013-05-03, by Michael Spacefalcon
-
loadtools: hw parameter file reading implemented2013-05-03, by Michael Spacefalcon
-
w8/w16/w32 implemented2013-05-03, by Michael Spacefalcon
-
use const to put things in .rodata2013-05-03, by Michael Spacefalcon
-
helloapp (proto-loadagent) compiles with r8/r16/r32 implemented2013-05-03, by Michael Spacefalcon
-
target-utils libcommon infrastructure for interactive commands2013-05-03, by Michael Spacefalcon
-
terget-utils: command entry implemented2013-05-01, by Michael Spacefalcon
-
target-utils refactored2013-05-01, by Michael Spacefalcon
-
fc-sertool actually works; output from loadagent is visible!2013-05-01, by Michael Spacefalcon
-
fc-sertool compiles2013-05-01, by Michael Spacefalcon
-
loadtools modules coming along2013-04-30, by Michael Spacefalcon
-
loadtools building blocks started2013-04-30, by Michael Spacefalcon
-
loadagent: generate binary and srec images2013-04-29, by Michael Spacefalcon
-
loadagent: printf hooked in2013-04-29, by Michael Spacefalcon
-
libprintf compiles with Anshit C GCC2013-04-29, by Michael Spacefalcon
-
libprintf brought in from older PPC/m68k code, but fucking GCC2013-04-29, by Michael Spacefalcon
-
loadagent.elf compiled and linked, no printf yet2013-04-29, by Michael Spacefalcon
-
loadagent: beginning to lay the foundation2013-04-29, by Michael Spacefalcon
-
starting with the toolchain for building our loadagent2013-04-28, by Michael Spacefalcon