FreeCalypso > hg > freecalypso-sw
graph
-
gsm-fw: started on the header dependencies for bsp/abb+spi/abb_core_inth.cSun, 17 Nov 2013 08:15:19 +0000, by Michael Spacefalcon
-
gsm-fw/bsp/Makefile: abb+spi hooked into the buildSun, 17 Nov 2013 06:08:47 +0000, by Michael Spacefalcon
-
abb.c compiles!Sun, 17 Nov 2013 05:53:10 +0000, by Michael Spacefalcon
-
tpudrv*.h headers importedSun, 17 Nov 2013 05:10:06 +0000, by Michael Spacefalcon
-
l1_rf<N>.h headers preenedSun, 17 Nov 2013 04:59:55 +0000, by Michael Spacefalcon
-
more L1 header files brought inSun, 17 Nov 2013 04:50:45 +0000, by Michael Spacefalcon
-
integrating more L1 header files needed by the abb+spi codeSat, 16 Nov 2013 20:55:06 +0000, by Michael Spacefalcon
-
gsm-fw/bsp/abb+spi: preening of header files, first passSat, 16 Nov 2013 19:41:30 +0000, by Michael Spacefalcon
-
gsm-fw/bsp/abb+spi: initial import from the Leonardo TCS211 versionSat, 16 Nov 2013 19:03:37 +0000, by Michael Spacefalcon
-
gsm-fw: sprintf %f: handle infinities and NaNsThu, 14 Nov 2013 19:16:38 +0000, by Michael Spacefalcon
-
gsm-fw/sprintf: %f implemented, debug output looks correctThu, 14 Nov 2013 19:03:52 +0000, by Michael Spacefalcon
-
gsm-fw: sprintf overhaul in preparation for adding %f format supportThu, 14 Nov 2013 17:51:33 +0000, by Michael Spacefalcon
-
gsm-fw/nucleus/tc[di].c: minor cleanupTue, 12 Nov 2013 16:57:08 +0000, by Michael Spacefalcon
-
Our nuc-fw is destined to become gsm-fw, so I went ahead and did the big hg mvTue, 12 Nov 2013 05:35:48 +0000, by Michael Spacefalcon
-
fw build for pirelli: set the ASIC_CONF register like the original fw doesTue, 12 Nov 2013 05:00:00 +0000, by Michael Spacefalcon
-
k5a3281.init (for GTA0x): set WS=3 for nCS0 like the official firmware doesTue, 12 Nov 2013 04:53:30 +0000, by Michael Spacefalcon
-
pirelli.init: go ahead and switch to 812500 baud automaticallyMon, 11 Nov 2013 11:06:50 +0000, by Michael Spacefalcon
-
fc-xram: print one '.' for every 100 S-recordsMon, 11 Nov 2013 10:46:19 +0000, by Michael Spacefalcon
-
nuc-fw cleanup: old Nucleus demo (w/o TI fw framework) moved out of the wayMon, 11 Nov 2013 10:17:08 +0000, by Michael Spacefalcon
-
RV bring-up: RVT "system time" heartbeat messages now get printed every 20 s!Mon, 11 Nov 2013 09:56:23 +0000, by Michael Spacefalcon
-
RV bring-up: lack of timer ticks fixed,Mon, 04 Nov 2013 23:35:11 +0000, by Michael Spacefalcon
-
fc-xram: execvp of secondary program implementedSun, 03 Nov 2013 00:14:40 +0000, by Michael Spacefalcon
-
rvtdump: time-stamped logging implementedSat, 02 Nov 2013 23:15:42 +0000, by Michael Spacefalcon
-
rvtdump: some restructuringSat, 02 Nov 2013 22:24:14 +0000, by Michael Spacefalcon
-
nuc-fw: switched from nucdemo to Riviera, got some serial outputSat, 02 Nov 2013 01:48:11 +0000, by Michael Spacefalcon
-
nuc-fw: sans-GSM tick timer and Init_Unmask_IT() implementedFri, 01 Nov 2013 22:59:49 +0000, by Michael Spacefalcon
-
nuc-fw: final preparations for the big transitionFri, 01 Nov 2013 08:03:23 +0000, by Michael Spacefalcon
-
Riviera should be ready for the first TI fw build attemptFri, 01 Nov 2013 06:13:58 +0000, by Michael Spacefalcon
-
nuc-fw: more minor preparations for the big transitionFri, 01 Nov 2013 01:31:39 +0000, by Michael Spacefalcon
-
rvtdump: satisfactory handling of output from Pirelli's fwThu, 31 Oct 2013 23:08:59 +0000, by Michael Spacefalcon
-
rvtdump utility written, compilesThu, 31 Oct 2013 19:59:16 +0000, by Michael Spacefalcon
-
target-utils command input: don't emit BEL on error conditionsThu, 31 Oct 2013 07:15:32 +0000, by Michael Spacefalcon
-
fc-[ix]ram: tty pass-thru mode made binary-safeThu, 31 Oct 2013 06:56:31 +0000, by Michael Spacefalcon
-
riviera hooked into nuc-fw buildThu, 31 Oct 2013 05:50:06 +0000, by Michael Spacefalcon
-
RVT compilesThu, 31 Oct 2013 04:37:17 +0000, by Michael Spacefalcon
-
RVM compilesThu, 31 Oct 2013 00:55:14 +0000, by Michael Spacefalcon
-
All of RVF compilesThu, 31 Oct 2013 00:17:12 +0000, by Michael Spacefalcon
-
starting to compile RVFWed, 30 Oct 2013 23:19:21 +0000, by Michael Spacefalcon
-
checking in Riviera code from the Sotomodem versionTue, 29 Oct 2013 07:03:45 +0000, by Michael Spacefalcon
-
nuc-fw: low-level serial code should be completeMon, 28 Oct 2013 07:35:47 +0000, by Michael Spacefalcon
-
started integrating TI's serial codeMon, 28 Oct 2013 06:49:44 +0000, by Michael Spacefalcon
-
nuc-fw: Init_Target() reconstructedSun, 27 Oct 2013 04:43:04 +0000, by Michael Spacefalcon
-
nuc-fw: continuing lowest-level BSP integrationThu, 24 Oct 2013 02:47:14 +0000, by Michael Spacefalcon
-
nuc-fw/bsp: niq32.c compilesSun, 20 Oct 2013 21:12:41 +0000, by Michael Spacefalcon
-
nuc-fw/bsp: niq32.c and sim.h replaced with new versionsSun, 20 Oct 2013 08:43:41 +0000, by Michael Spacefalcon
-
nuc-fw/bsp: more reconciliationSun, 20 Oct 2013 07:58:00 +0000, by Michael Spacefalcon
-
nuc-fw/bsp: per-target ARMIO init implementedSun, 20 Oct 2013 07:04:15 +0000, by Michael Spacefalcon
-
nuc-fw/bsp: beginning of reconciliation with the Leonardo semi-src versionSat, 19 Oct 2013 18:59:34 +0000, by Michael Spacefalcon
-
target-utils/Makefile: make clean: support for subset packagingFri, 13 Sep 2013 17:00:09 +0000, by Michael Spacefalcon
-
loadtools/README: documentation for loadtools should now be completeFri, 13 Sep 2013 16:47:09 +0000, by Michael Spacefalcon
-
fc-loadtool program-{m0,srec}: more usable progress indicationWed, 11 Sep 2013 17:58:55 +0000, by Michael Spacefalcon
-
fc-loadtool help implementedTue, 03 Sep 2013 07:31:26 +0000, by Michael Spacefalcon
-
pirexplore: approaching sanity with the LCDMon, 02 Sep 2013 03:07:07 +0000, by Michael Spacefalcon
-
target-utils/libmpffs: minor refactoring, read into RAM implementedMon, 02 Sep 2013 01:28:11 +0000, by Michael Spacefalcon
-
pirexplore FFS: buglet fixed, works nowMon, 02 Sep 2013 00:41:18 +0000, by Michael Spacefalcon
-
pirexplore: FFS find command implementedMon, 02 Sep 2013 00:33:54 +0000, by Michael Spacefalcon
-
pirexplore: beginning of FFS supportSun, 01 Sep 2013 21:55:51 +0000, by Michael Spacefalcon
-
fc-loadtool: flash program-{m0,srec} implementedSun, 01 Sep 2013 18:59:48 +0000, by Michael Spacefalcon
-
fc-loadtool dump2srec: decorate the SREC output file with S0 and S7 recordsSun, 01 Sep 2013 17:20:58 +0000, by Michael Spacefalcon
-
some README files addedSun, 01 Sep 2013 12:54:42 +0000, by Michael Spacefalcon