--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/loadtools/scripts/fcfam.config	Tue May 03 19:51:41 2016 +0000
@@ -0,0 +1,22 @@
+# This loadtool target configuration is intended to be applicable to all
+# original hardware designs created within the FreeCalypso project,
+# starting with FCDEV3B.  Specifically, it should fit all targets that
+# satisfy the following criteria:
+#
+# The DBB chip is Calypso C035
+# The RF block is Rita (26 MHz VCXO)
+# Spansion S71PL129NC0 used for flash and XRAM, copied from Pirelli DP-L10
+# The 2nd flash chip select is wired to nCS2
+
+# The following parameters go into the <p command sent to the boot ROM
+pll-config 4/1		# 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz
+rhea-cntl 0x00		# good for all Calypso platforms
+
+# The remaining settings are carried out via loadagent commands
+init-script cs2-4ws-8mb.init
+
+# Flash type and chip select base addresses
+flash pl129n 0x03000000 0x01800000
+
+# Perform a Iota poweroff when we are done
+exit-mode iota-off