FreeCalypso > hg > freecalypso-sw
changeset 308:3c5a17928fda
DAR: starting to clean and compile .c files
| author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
|---|---|
| date | Sun, 16 Mar 2014 20:46:10 +0000 |
| parents | 749ca89741fa |
| children | a7087f91c752 |
| files | gsm-fw/services/dar/Makefile gsm-fw/services/dar/dar_api.c gsm-fw/services/dar/dar_diagnose.c gsm-fw/services/dar/dar_emergency.c |
| diffstat | 4 files changed, 345 insertions(+), 318 deletions(-) [+] |
line wrap: on
line diff
--- a/gsm-fw/services/dar/Makefile Sun Mar 16 07:39:29 2014 +0000 +++ b/gsm-fw/services/dar/Makefile Sun Mar 16 20:46:10 2014 +0000 @@ -2,7 +2,7 @@ CFLAGS= -O2 -fno-builtin -mthumb-interwork -mthumb LD= arm-elf-ld -OBJS= dar_api.o +OBJS= dar_api.o dar_diagnose.o dar_emergency.o HDRS= dar_api.h dar_const_i.h dar_diagnose_i.h dar_emergency.h dar_env.h \ dar_error_hdlr_i.h dar_gen.h dar_handle_message.h dar_macro_i.h \
--- a/gsm-fw/services/dar/dar_api.c Sun Mar 16 07:39:29 2014 +0000 +++ b/gsm-fw/services/dar/dar_api.c Sun Mar 16 20:46:10 2014 +0000 @@ -1,5 +1,5 @@ /****************************************************************************/ -/* */ +/* */ /* File Name: dar_api.c */ /* */ /* Purpose: This file contains all the functions used to service */ @@ -7,7 +7,7 @@ /* */ /* Version 0.1 */ /* */ -/* Date Modification */ +/* Date Modification */ /* ---------------------------------------------------------------------- */ /* 2 October 2001 Create */ /* */
--- a/gsm-fw/services/dar/dar_diagnose.c Sun Mar 16 07:39:29 2014 +0000 +++ b/gsm-fw/services/dar/dar_diagnose.c Sun Mar 16 20:46:10 2014 +0000 @@ -7,7 +7,7 @@ /* */ /* Version 0.1 */ /* */ -/* Date Modification */ +/* Date Modification */ /* ------------------------------------ */ /* 18 October 2001 Create */ /* */ @@ -16,23 +16,23 @@ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ -#include "rv/rv_defined_swe.h" +#include "../../riviera/rv/rv_defined_swe.h" #ifdef RVM_DAR_SWE #ifndef _WINDOWS - #include "timer/timer.h" + #include "../../bsp/timer.h" #endif - #include "rv/rv_general.h" - #include "rvm/rvm_gen.h" - #include "rvm/rvm_priorities.h" - #include "dar/dar_api.h" - #include "dar/dar_structs_i.h" - #include "dar/dar_env.h" - #include "rvf/rvf_target.h" - #include "dar/dar_const_i.h" - #include "dar/dar_macro_i.h" - #include "dar/dar_messages_i.h" - #include "dar/dar_error_hdlr_i.h" + #include "../../riviera/rv/rv_general.h" + #include "../../riviera/rvm/rvm_gen.h" + #include "../../riviera/rvm/rvm_priorities.h" + #include "dar_api.h" + #include "dar_structs_i.h" + #include "dar_env.h" + #include "../../riviera/rvf/rvf_target.h" + #include "dar_const_i.h" + #include "dar_macro_i.h" + #include "dar_messages_i.h" + #include "dar_error_hdlr_i.h" //#include "rvf/rvf_i.h" /**** Global variables ****/ @@ -42,12 +42,12 @@ - /********************************************************************************/ - /* Function dar_search_group */ - /* */ - /* Description This function checks if the use_id group_nb exists: */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* Function dar_search_group */ + /* */ + /* Description This function checks if the use_id group_nb exists: */ + /* */ + /***************************************************************************/ T_RV_RET dar_search_group(UINT16 group, UINT8 *index_p) { /* Declare local variables */ @@ -74,12 +74,12 @@ } } - /********************************************************************************/ - /* Function dar_add_group */ - /* */ - /* Description This function research the index of the first free group */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* Function dar_add_group */ + /* */ + /* Description This function research the index of the first free */ + /* group */ + /***************************************************************************/ T_RV_RET dar_add_group(UINT8 *index_p) { /* Declare local variables */ @@ -105,25 +105,25 @@ } - /********************************************************************************/ - /* */ - /* Function Name: dar_send_write_data */ - /* */ - /* Purpose: This function is called to send write data in the DAR mailbox */ - /* */ - /* Input Parameters: */ - /* Pointer to the message to store */ - /* Data Format, */ - /* Data level, */ - /* Data Use Id, */ - /* */ - /* Output Parameters: */ - /* Validation of the function execution. */ - /* */ - /* Note: */ - /* None */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_send_write_data */ + /* */ + /* Purpose: This function is called to send write data in the DAR */ + /* mailbox. */ + /* Input Parameters: */ + /* Pointer to the message to store */ + /* Data Format, */ + /* Data level, */ + /* Data Use Id, */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None */ + /* */ + /***************************************************************************/ T_RV_RET dar_send_write_data ( T_DAR_INFO *buffer_p, T_DAR_FORMAT format, @@ -165,11 +165,11 @@ write_data_p->os_hdr.src_addr_id = dar_gbl_var_p->addrId; /* fill the message parameters */ - write_data_p->data_write.char_p = buffer_p ; - write_data_p->data_write.data_format = format; - write_data_p->data_write.level = diagnose_info_level; - write_data_p->data_write.use_id.group_nb = (dar_use_id>>16)& 0x7FFF; - write_data_p->data_write.use_id.mask = (dar_use_id)&0xFFFF; + write_data_p->data_write.char_p = buffer_p ; + write_data_p->data_write.data_format = format; + write_data_p->data_write.level = diagnose_info_level; + write_data_p->data_write.use_id.group_nb = (dar_use_id>>16)& 0x7FFF; + write_data_p->data_write.use_id.mask = (dar_use_id)&0xFFFF; /* send the messsage to the DAR entity */ rvf_send_msg (dar_gbl_var_p->addrId, @@ -182,24 +182,24 @@ return(RV_NOT_READY); } - + } /* dar_send_write_data */ - /********************************************************************************/ - /* Function dar_reset */ - /* */ - /* Description This function is used to reset the system */ - /* */ - /* Input Parameters: */ - /* None */ - /* */ - /* Output Parameters: */ - /* Validation of the function execution. */ - /* */ - /* Note: */ - /* None */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* Function dar_reset */ + /* */ + /* Description This function is used to reset the system */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None */ + /* */ + /***************************************************************************/ T_RV_RET dar_reset(void) { #ifndef _WINDOWS @@ -215,16 +215,22 @@ /* initialize the adress of the watchdog timer pointer */ register_p = (volatile UINT16 *)WATCHDOG_TIM_MODE; - /* Write the 0xF5 value to the Watchdog timer mode register to disable the Watchdog*/ + /* Write the 0xF5 value to the Watchdog timer mode register to disable + the Watchdog */ /* Note the bit 15 must be unchanged ( bit 15 = 1 -> 0x8000)*/ *register_p =0x80F5; - /* Wait a couple of time to be sure that this register has a new value */ + /* Wait a couple of time to be sure that this register has a new + value */ for (i=0;i<100;i++); - /* After having received 0xF5 in the Watchdog timer mode register, if the */ - /* second write access is differennt from 0xA0, ARM core is reset */ - /* The ARM HW core is reset + branch to adress 0x0000 ( SW reset) */ + /* + * After having received 0xF5 in the Watchdog timer mode register, + * if the second write access is differennt from 0xA0, ARM core is + * reset. + * + * The ARM HW core is reset + branch to adress 0x0000 ( SW reset) + */ *register_p=0x80F5; /* Wait until the ARM reset */ @@ -235,19 +241,19 @@ } /* dar_reset */ - /********************************************************************************/ - /* */ - /* Function dar_read_mbox */ - /* */ - /* Description Called by the dar to read a buffer from its mailboxes. */ - /* when the Operating System is out */ - /* Input Parameters: */ - /* None */ - /* */ - /* Output Parameters: */ - /* NULL if the mailbox was empty, else the address of a buffer */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function dar_read_mbox */ + /* */ + /* Description Called by the dar to read a buffer from its mailboxes. */ + /* when the Operating System is out */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* NULL if the mailbox was empty, else the address of a buffer */ + /* */ + /***************************************************************************/ void * dar_read_mbox (UINT8 mbox) { @@ -287,37 +293,34 @@ /* THE DAR ENTITY IS DISABLED */ /* ******************************************************* */ #ifndef _WINDOWS - #include "config/swconfig.cfg" - #include "config/sys.cfg" - #include "config/chipset.cfg" - #include "timer/timer.h" + #include "../../bsp/timer.h" #endif - #include "rv/rv_general.h" - #include "rvm/rvm_gen.h" - #include "rvm/rvm_priorities.h" - #include "rvf/rvf_target.h" + #include "../../riviera/rv/rv_general.h" + #include "../../riviera/rvm/rvm_gen.h" + #include "../../riviera/rvm/rvm_priorities.h" + #include "../../riviera/rvf/rvf_target.h" //#include "rvf/rvf_i.h" /* Define the Watchdog timer register mode */ #define WATCHDOG_TIM_MODE (0xFFFFF804) - /********************************************************************************/ - /* Function dar_reset */ - /* */ - /* Description This function is used to reset the system */ - /* */ - /* Input Parameters: */ - /* None */ - /* */ - /* Output Parameters: */ - /* Validation of the function execution. */ - /* */ - /* Note: */ - /* None */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* Function dar_reset */ + /* */ + /* Description This function is used to reset the system */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None */ + /* */ + /***************************************************************************/ T_RV_RET dar_reset(void) { #ifndef _WINDOWS @@ -333,16 +336,22 @@ /* initialize the adress of the watchdog timer pointer */ register_p = (volatile UINT16 *)WATCHDOG_TIM_MODE; - /* Write the 0xF5 value to the Watchdog timer mode register to disable the Watchdog*/ + /* Write the 0xF5 value to the Watchdog timer mode register to disable + the Watchdog */ /* Note the bit 15 must be unchanged ( bit 15 = 1 -> 0x8000)*/ *register_p =0x80F5; - /* Wait a couple of time to be sure that this register has a new value */ + /* Wait a couple of time to be sure that this register has a new + value */ for (i=0;i<100;i++); - /* After having received 0xF5 in the Watchdog timer mode register, if the */ - /* second write access is differennt from 0xA0, ARM core is reset */ - /* The ARM HW core is reset + branch to adress 0x0000 ( SW reset) */ + /* + * After having received 0xF5 in the Watchdog timer mode register, + * if the second write access is differennt from 0xA0, ARM core is + * reset. + * + * The ARM HW core is reset + branch to adress 0x0000 ( SW reset) + */ *register_p=0x80F5; /* Wait until the ARM reset */
--- a/gsm-fw/services/dar/dar_emergency.c Sun Mar 16 07:39:29 2014 +0000 +++ b/gsm-fw/services/dar/dar_emergency.c Sun Mar 16 20:46:10 2014 +0000 @@ -8,7 +8,7 @@ /* */ /* Version 0.1 */ /* */ -/* Date Modification */ +/* Date Modification */ /* ------------------------------------ */ /* 17 October 2001 Create */ /* */ @@ -17,23 +17,23 @@ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ -#include "rv/rv_defined_swe.h" +#include "../../riviera/rv/rv_defined_swe.h" #ifdef RVM_DAR_SWE /* ************************************************ */ /* THE DAR ENTITY IS ENABLED */ /* ************************************************ */ #include <string.h> - #include "rvm/rvm_gen.h" - #include "dar/dar_api.h" - #include "dar/dar_macro_i.h" - #include "dar/dar_messages_i.h" - #include "dar/dar_const_i.h" - #include "dar/dar_diagnose_i.h" - #include "dar/dar_msg_ft.h" + #include "../../riviera/rvm/rvm_gen.h" + #include "dar_api.h" + #include "dar_macro_i.h" + #include "dar_messages_i.h" + #include "dar_const_i.h" + #include "dar_diagnose_i.h" + #include "dar_msg_ft.h" #ifndef _WINDOWS - #include "timer/timer.h" + #include "../../bsp/timer.h" #endif /**** Global variable ****/ @@ -65,29 +65,29 @@ extern void exception(void); - /********************************************************************************/ - /* */ - /* Function Name: dar_process_emergency */ - /* */ - /* Purpose: This function is called to process emergency data and to store */ - /* them in RAM buffer when an emergency has been detected */ - /* */ - /* */ - /* Input Parameters: */ - /* Pointer to the message to store */ - /* Data Format, ( the Binary format is not supported) */ - /* Data Use Id, */ - /* Flags */ - /* */ - /* Output Parameters: */ - /* Validation of the diagnose execution. */ - /* */ - /* */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_process_emergency */ + /* */ + /* Purpose: This function is called to process emergency data and to */ + /* store them in RAM buffer when an emergency has been */ + /* detected. */ + /* */ + /* Input Parameters: */ + /* Pointer to the message to store */ + /* Data Format, ( the Binary format is not supported) */ + /* Data Use Id, */ + /* Flags */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ T_RV_RET dar_process_emergency( T_DAR_INFO *buffer_p, T_DAR_FORMAT format, T_RVM_USE_ID dar_use_id, @@ -136,26 +136,26 @@ /** Circular buffer to store data **/ /* Add 0xFF to separate 2 strings */ dar_write_buffer[dar_current_index] = 0xF; - DAR_PLUS_PLUS(dar_current_index); /* to detected if it is the end of the buffer */ + DAR_PLUS_PLUS(dar_current_index); /* increment with wraparound */ dar_write_buffer[dar_current_index] = 0xF; - DAR_PLUS_PLUS(dar_current_index); /* to detected if it is the end of the buffer */ + DAR_PLUS_PLUS(dar_current_index); /* increment with wraparound */ /* The group_nb is 16 bit length, and the buffer is an UINT8 length */ /* So the group_nb must be stocked by dividing it in 2 parts */ dar_write_buffer[dar_current_index] = ((dar_use_id>>16)& 0x7FFF)>>8; - /*add the 8 first bits of the Use id group*/ + /*add the 8 first bits of the Use id group*/ DAR_PLUS_PLUS(dar_current_index); dar_write_buffer[dar_current_index] = (dar_use_id>>16)& 0x7FFF; - /*add the 8 last bits of the Use id group*/ + /*add the 8 last bits of the Use id group*/ DAR_PLUS_PLUS(dar_current_index); /* The mask is 16 bit length, and the buffer is an UINT8 length */ /* So the mask must be stocked by dividing it in 2 parts */ dar_write_buffer[dar_current_index] = ((dar_use_id)&0xFFFF)>>8; - /* add the 8 first bits of the Use id mask */ + /* add the 8 first bits of the Use id mask */ DAR_PLUS_PLUS(dar_current_index); dar_write_buffer[dar_current_index] = (dar_use_id)&0xFFFF; - /* add the 8 last bits of the Use id mask */ + /* add the 8 last bits of the Use id mask */ DAR_PLUS_PLUS(dar_current_index); /* Add the dar_level data */ @@ -187,8 +187,10 @@ { if (dar_gbl_var_p->entity_dar_callback != NULL ) { - /* Call the MMI callback function to save some parameters before reset */ - dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer,DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); + /* Call the MMI callback function to save some parameters before + reset */ + dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer, + DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); } } @@ -202,25 +204,26 @@ } /* dar_process_emergency */ - /********************************************************************************/ - /* */ - /* Function Name: dar_exception_arm_undefined */ - /* */ - /* Purpose: This function is called to process ARM undefined instruction */ - /* exception and to store this exception in the RAM buffer */ - /* */ - /* Input Parameters: */ - /* None */ - /* */ - /* Output Parameters: */ - /* Validation of the diagnose execution. */ - /* */ - /* */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_exception_arm_undefined */ + /* */ + /* Purpose: This function is called to process ARM undefined */ + /* instruction exception and to store this exception in the */ + /* RAM buffer. */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ void dar_exception_arm_undefined(void) { /* Declare local variables */ @@ -240,8 +243,10 @@ { if (dar_gbl_var_p->entity_dar_callback != NULL) { - /* Call the MMI callback function to save some parameters before reset */ - dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer,DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); + /* Call the MMI callback function to save some parameters before + reset */ + dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer, + DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); } } @@ -249,28 +254,28 @@ /* branch to "exception" defined in the int.s*/ exception(); #endif - + } /* dar_exception_arm_undefined */ - /********************************************************************************/ - /* */ - /* Function Name: dar_exception_arm_swi */ - /* */ - /* Purpose: This function is called to process ARM SW Interrupt exception */ - /* and to store this exception in the RAM buffer */ - /* */ - /* Input Parameters: */ - /* None */ - /* */ - /* Output Parameters: */ - /* Validation of the diagnose execution. */ - /* */ - /* */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_exception_arm_swi */ + /* */ + /* Purpose: This function is called to process ARM SW Interrupt */ + /* exception and to store this exception in the RAM buffer. */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ void dar_exception_arm_swi(void) { /* Declare local variables */ @@ -290,8 +295,10 @@ { if ( dar_gbl_var_p->entity_dar_callback != NULL) { - /* Call the MMI callback function to save some parameters before reset */ - dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer,DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); + /* Call the MMI callback function to save some parameters before + reset */ + dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer, + DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); } } @@ -299,28 +306,28 @@ /* branch to "exception" defined in the int.s*/ exception(); #endif - + } /* dar_exception_arm_swi */ - /********************************************************************************/ - /* */ - /* Function Name: dar_exception_arm_abort_prefetch */ - /* */ - /* Purpose: This function is called to process ARM abort prefetch exception */ - /* and to store this exception in the RAM buffer */ - /* */ - /* Input Parameters: */ - /* None */ - /* */ - /* Output Parameters: */ - /* Validation of the diagnose execution. */ - /* */ - /* */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_exception_arm_abort_prefetch */ + /* */ + /* Purpose: This function is called to process ARM abort prefetch */ + /* exception and to store this exception in the RAM buffer. */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ void dar_exception_arm_abort_prefetch(void) { #ifndef _WINDOWS @@ -328,10 +335,11 @@ UINT8 i; #endif - #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) - /* Debug unit pointer */ - volatile UINT32 *debug_register_p; - #endif + #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || \ + (CHIPSET == 11) || (CHIPSET == 12)) + /* Debug unit pointer */ + volatile UINT32 *debug_register_p; + #endif /* Declare local variables */ T_DAR_INFO *buffer_p = " DAR Emergency exception : ARM abort prefetch";/*exception data to store*/ @@ -350,25 +358,29 @@ { if (dar_gbl_var_p->entity_dar_callback != NULL) { - /* Call the MMI callback function to save some parameters before reset */ - dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer,DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); + /* Call the MMI callback function to save some parameters before + reset */ + dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer, + DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); } } - #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) - /* Initialize the adress of the Debug Unit pointer */ - debug_register_p = (volatile UINT32*) DAR_DEBUG_UNIT_REGISTER; - #endif + #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || \ + (CHIPSET == 11) || (CHIPSET == 12)) + /* Initialize the adress of the Debug Unit pointer */ + debug_register_p = (volatile UINT32*) DAR_DEBUG_UNIT_REGISTER; + #endif #ifndef _WINDOWS - #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) - /* Save the Debug Unit into the RAM */ - for (i=0; i<DEBUG_UNIT_WORD_SIZE; i++ ) - { - debug_RAM[i] = *debug_register_p; - debug_register_p++; - } - #endif + #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || \ + (CHIPSET == 11) || (CHIPSET == 12)) + /* Save the Debug Unit into the RAM */ + for (i=0; i<DEBUG_UNIT_WORD_SIZE; i++ ) + { + debug_RAM[i] = *debug_register_p; + debug_register_p++; + } + #endif /* branch to "exception" defined in the int.s*/ exception(); @@ -376,25 +388,25 @@ } /* dar_exception_arm_abort_prefetch */ - /********************************************************************************/ - /* */ - /* Function Name: dar_exception_arm_abort_data */ - /* */ - /* Purpose: This function is called to process ARM abort data exception */ - /* and to store this exception in the RAM buffer */ - /* */ - /* Input Parameters: */ - /* None */ - /* */ - /* Output Parameters: */ - /* Validation of the diagnose execution. */ - /* */ - /* */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_exception_arm_abort_data */ + /* */ + /* Purpose: This function is called to process ARM abort data exception*/ + /* and to store this exception in the RAM buffer */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ void dar_exception_arm_abort_data(void) { #ifndef _WINDOWS @@ -402,10 +414,11 @@ UINT8 i; #endif - #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) - /* Debug unit pointer */ - volatile UINT32 *debug_register_p; - #endif + #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || \ + (CHIPSET == 11) || (CHIPSET == 12)) + /* Debug unit pointer */ + volatile UINT32 *debug_register_p; + #endif /* Declare local variables */ T_DAR_INFO *buffer_p= " DAR Emergency exception : ARM abort data";/*exception data to store*/ @@ -425,51 +438,55 @@ if (dar_gbl_var_p->entity_dar_callback != NULL) { - /* Call the MMI callback function to save some parameters before reset */ - dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer,DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); + /* Call the MMI callback function to save some parameters before + reset */ + dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer, + DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); } } - #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) - /* Initialize the adress of the Debug Unit pointer */ - debug_register_p = (volatile UINT32*) DAR_DEBUG_UNIT_REGISTER; - #endif + #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || \ + (CHIPSET == 11) || (CHIPSET == 12)) + /* Initialize the adress of the Debug Unit pointer */ + debug_register_p = (volatile UINT32*) DAR_DEBUG_UNIT_REGISTER; + #endif #ifndef _WINDOWS - #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || (CHIPSET == 11) || (CHIPSET == 12)) - /* Save the Debug Unit into the RAM */ - for (i=0; i<DEBUG_UNIT_WORD_SIZE; i++ ) - { + #if ((CHIPSET == 7) || (CHIPSET == 8) || (CHIPSET == 10) || \ + (CHIPSET == 11) || (CHIPSET == 12)) + /* Save the Debug Unit into the RAM */ + for (i=0; i<DEBUG_UNIT_WORD_SIZE; i++ ) + { debug_RAM[i] = *debug_register_p; debug_register_p++; - } - #endif - - /* branch to "exception" defined in the int.s*/ + } + #endif + + /* branch to "exception" defined in the int.s*/ exception(); #endif - + } /* dar_exception_arm_abort_data */ - /********************************************************************************/ - /* */ - /* Function Name: dar_exception_arm_reserved */ - /* */ - /* Purpose: This function is called to process ARM exception */ - /* and to store this exception in the RAM buffer */ - /* */ - /* Input Parameters: */ - /* None */ - /* */ - /* Output Parameters: */ - /* Validation of the diagnose execution. */ - /* */ - /* */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_exception_arm_reserved */ + /* */ + /* Purpose: This function is called to process ARM exception */ + /* and to store this exception in the RAM buffer */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ void dar_exception_arm_reserved(void) { /* Declare local variables */ @@ -489,8 +506,10 @@ { if (dar_gbl_var_p->entity_dar_callback != NULL) { - /* Call the MMI callback function to save some parameters before reset */ - dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer,DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); + /* Call the MMI callback function to save some parameters before + reset */ + dar_gbl_var_p->entity_dar_callback(dar_recovery_buffer, + DAR_RECOVERY_DATA_MAX_BUFFER_SIZE); } } @@ -501,31 +520,31 @@ } /* dar_exception_arm_reserved */ - /********************************************************************************/ - /* */ - /* Function Name: dar_exception */ - /* */ - /* Purpose: This function is called to vector exceptions to the correct */ - /* handler */ - /* */ - /* Input Parameters: */ - /* abort type which come from int.s ( -> magic number) */ - /* */ - /* Output Parameters: */ - /* Validation of the diagnose execution. */ - /* */ - /* */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /****************************************************************************/ + /* */ + /* Function Name: dar_exception */ + /* */ + /* Purpose: This function is called to vector exceptions to the correct */ + /* handler */ + /* */ + /* Input Parameters: */ + /* abort type which come from int.s ( -> magic number) */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /****************************************************************************/ void dar_exception(int abort_type) { switch (abort_type) { - /* magic numbers come from int.s There is no way to make compiler derived - * constants out of them + /* magic numbers come from int.s There is no way to make compiler + * derived constants out of them */ case 1: dar_exception_arm_undefined(); @@ -559,4 +578,3 @@ } /* dar_exception */ #endif /* #ifdef RVM_DAR_SWE */ -