FreeCalypso > hg > freecalypso-sw
changeset 307:749ca89741fa
DAR: starting to compile
| author | Michael Spacefalcon <msokolov@ivan.Harhan.ORG> |
|---|---|
| date | Sun, 16 Mar 2014 07:39:29 +0000 |
| parents | 81bee6125882 |
| children | 3c5a17928fda |
| files | gsm-fw/services/Makefile gsm-fw/services/dar/Makefile gsm-fw/services/dar/dar_api.c |
| diffstat | 3 files changed, 332 insertions(+), 311 deletions(-) [+] |
line wrap: on
line diff
--- a/gsm-fw/services/Makefile Sun Mar 16 06:50:26 2014 +0000 +++ b/gsm-fw/services/Makefile Sun Mar 16 07:39:29 2014 +0000 @@ -1,6 +1,6 @@ sinclude ../include/config.mk -ALL_SUBDIR= etm ffs +ALL_SUBDIR= dar etm ffs BUILD_SUBDIR= ffs ifeq (${RVM_ETM_SWE},1)
--- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/gsm-fw/services/dar/Makefile Sun Mar 16 07:39:29 2014 +0000 @@ -0,0 +1,20 @@ +CC= arm-elf-gcc +CFLAGS= -O2 -fno-builtin -mthumb-interwork -mthumb +LD= arm-elf-ld + +OBJS= dar_api.o + +HDRS= dar_api.h dar_const_i.h dar_diagnose_i.h dar_emergency.h dar_env.h \ + dar_error_hdlr_i.h dar_gen.h dar_handle_message.h dar_macro_i.h \ + dar_messages_i.h dar_msg_ft.h dar_pool_size.h dar_structs_i.h \ + dar_watchdog.h + +all: xipcode.o + +${OBJS}: ${HDRS} + +xipcode.o: ${OBJS} + ${LD} -r -o $@ ${OBJS} + +clean: + rm -f *.[oa] *errs
--- a/gsm-fw/services/dar/dar_api.c Sun Mar 16 06:50:26 2014 +0000 +++ b/gsm-fw/services/dar/dar_api.c Sun Mar 16 07:39:29 2014 +0000 @@ -16,42 +16,35 @@ /* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/ /****************************************************************************/ -#include "rv/rv_defined_swe.h" +#include "../../riviera/rv/rv_defined_swe.h" - + #ifdef RVM_DAR_SWE - #ifndef _WINDOWS - #include "swconfig.cfg" - #include "sys.cfg" - #include "l1sw.cfg" - #include "chipset.cfg" - #endif + #include "../../include/config.h" - #include "abb/abb.h" - #include "rv/rv_general.h" - #include "rvm/rvm_gen.h" - #include "dar/dar_api.h" - #include "dar/dar_env.h" - #include "dar/dar_error_hdlr_i.h" - #include "dar/dar_messages_i.h" - #include "dar/dar_msg_ft.h" - #include "dar/dar_macro_i.h" - #include "dar/dar_diagnose_i.h" - #include "dar/dar_const_i.h" - #include "dar/dar_emergency.h" - + #include "../../bsp/abb+spi/abb.h" + #include "../../riviera/rv/rv_general.h" + #include "../../riviera/rvm/rvm_gen.h" + #include "dar_api.h" + #include "dar_env.h" + #include "dar_error_hdlr_i.h" + #include "dar_messages_i.h" + #include "dar_msg_ft.h" + #include "dar_macro_i.h" + #include "dar_diagnose_i.h" + #include "dar_const_i.h" + #include "dar_emergency.h" #ifndef _WINDOWS /* enable the timer */ - #include "memif/mem.h" - #include "timer/timer.h" - #include "inth/iq.h" + #include "../../bsp/mem.h" + #include "../../bsp/timer.h" + #include "../../bsp/iq.h" #if (CHIPSET == 12) #include "inth/sys_inth.h" #endif #endif - /**** Global variable ****/ /* Define load timer */ static UINT16 dar_load_tim = 0x0; @@ -78,31 +71,31 @@ /* Define a pointer to the Global Environment Control block */ extern T_DAR_ENV_CTRL_BLK *dar_gbl_var_p; - /* **************************************************************************** */ - /* RECOVERY */ - /* **************************************************************************** */ + /* *********************************************************************** */ + /* RECOVERY */ + /* *********************************************************************** */ - /********************************************************************************/ - /* */ - /* Function Name: dar_recovery_get_status */ - /* */ - /* Purpose: This function is called by the MMI at the beginning of the */ - /* procedure, in order to get the status of the last reset of */ - /* the system. */ - /* */ - /* Input Parameters: */ - /* Dar recovery status */ - /* */ - /* Output Parameters: */ - /* Validation of the function execution. */ - /* */ - /* Note: */ - /* None. */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_recovery_get_status */ + /* */ + /* Purpose: This function is called by the MMI at the beginning of the */ + /* procedure, in order to get the status of the last reset of */ + /* the system. */ + /* */ + /* Input Parameters: */ + /* Dar recovery status */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ T_RV_RET dar_recovery_get_status(T_DAR_RECOVERY_STATUS* status) { /* Variable to know the status of th Omega VRPC register */ @@ -168,28 +161,28 @@ } default: { - #if (_GSM==1) || (defined _WINDOWS) + #if 1 //(_GSM==1) || (defined _WINDOWS) dar_pwr_status = ABB_Read_Status(); - #if ((ANLG_FAM == 1) || (ANLG_FAM == 2)) + #if ((ANALOG == 1) || (ANALOG == 2)) if (dar_pwr_status & ONBSTS) - #elif (ANLG_FAM == 3) + #elif (ANALOG == 3) if (dar_pwr_status & PWONBSTS) #endif { - /* Switch on Condition on ON BUTTON Push */ - DAR_SEND_TRACE("Dar Entity: Status of the last reset of the system = POWER ON/OFF",RV_TRACE_LEVEL_DEBUG_HIGH); + /* Switch on Condition on ON BUTTON Push */ + DAR_SEND_TRACE("Dar Entity: Status of the last reset of the system = POWER ON/OFF",RV_TRACE_LEVEL_DEBUG_HIGH); break; } else { /* Branch to a reset at adress 0 */ - DAR_SEND_TRACE("Dar Entity: Status of the last reset of the system = BRANCH to adress 0",RV_TRACE_LEVEL_DEBUG_HIGH); + DAR_SEND_TRACE("Dar Entity: Status of the last reset of the system = BRANCH to adress 0",RV_TRACE_LEVEL_DEBUG_HIGH); break; } #else /* the SPI is not available in BOARD_TEST configuration */ - DAR_SEND_TRACE("Dar Entity: Status of the last reset of the system = POWER ON/OFF or BRANCH to adress 0",RV_TRACE_LEVEL_DEBUG_HIGH); + DAR_SEND_TRACE("Dar Entity: Status of the last reset of the system = POWER ON/OFF or BRANCH to adress 0",RV_TRACE_LEVEL_DEBUG_HIGH); #endif } }/* switch */ @@ -198,30 +191,30 @@ } /* dar_recovery_get_status */ - /********************************************************************************/ - /* */ - /* Function Name: dar_recovery_config */ - /* */ - /* Purpose: This function is used to store a callback function that will be */ - /* called by the recovery system when a recovery procedure has */ - /* been initiated */ - /* */ - /* Input Parameters: */ - /* dar callback function */ - /* */ - /* Output Parameters: */ - /* Validation of the function execution. */ - /* */ - /* Note: */ - /* None. */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_recovery_config */ + /* */ + /* Purpose: This function is used to store a callback function that */ + /* will be called by the recovery system when a recovery */ + /* procedure has been initiated */ + /* */ + /* Input Parameters: */ + /* dar callback function */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ T_RV_RET dar_recovery_config(T_RV_RET (*dar_store_recovery_data) - (T_DAR_BUFFER buffer_p, - UINT16 length)) + (T_DAR_BUFFER buffer_p, + UINT16 length)) { /* call the callback function */ dar_gbl_var_p->entity_dar_callback = dar_store_recovery_data; @@ -229,33 +222,34 @@ return(RV_OK); } /* dar_recovery_config */ - /********************************************************************************/ - /* */ - /* Function Name: dar_get_recovery_data */ - /* */ - /* Purpose: This function is used to retrieve data that have been stored */ - /* in the buffer just before a reset. */ - /* */ - /* Input Parameters: */ - /* - the buffer in whom important data have been stored before the reset */ - /* - the length of the buffer */ - /* */ - /* Output Parameters: */ - /* Validation of the function execution. */ - /* */ - /* Note: */ - /* None. */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ - T_RV_RET dar_get_recovery_data( T_DAR_BUFFER buffer_p, UINT16 length ) + /***************************************************************************/ + /* */ + /* Function Name: dar_get_recovery_data */ + /* */ + /* Purpose: This function is used to retrieve data that have been */ + /* stored in the buffer just before a reset. */ + /* */ + /* Input Parameters: */ + /* - the buffer in whom important data have been stored before the */ + /* reset */ + /* - the length of the buffer */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ + T_RV_RET dar_get_recovery_data( T_DAR_BUFFER buffer_p, UINT16 length ) { /* Local variables */ UINT8 i; - if (buffer_p != NULL) + if (buffer_p != NULL) { if(length <= DAR_RECOVERY_DATA_MAX_BUFFER_SIZE) { @@ -286,39 +280,39 @@ } /* dar_get_recovery_data */ - /* **************************************************************************** */ - /* WATCHDOG */ - /* **************************************************************************** */ + /* *********************************************************************** */ + /* WATCHDOG */ + /* *********************************************************************** */ - /********************************************************************************/ - /* */ - /* Function Name: dar_start_watchdog_timer */ - /* */ - /* Purpose: This function uses the timer as a general purpose timer instead */ - /* of Watchdog. It loads the timer , starts it and then unmasks */ - /* the interrupt. */ - /* */ - /* Input Parameters: */ - /* time's interval in milliseconds before the timer expires */ - /* */ - /* Output Parameters: */ - /* Validation of the function execution. */ - /* */ - /* Note: */ - /* None. */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_start_watchdog_timer */ + /* */ + /* Purpose: This function uses the timer as a general purpose timer */ + /* instead of Watchdog. It loads the timer, starts it and */ + /* then unmasks the interrupt. */ + /* */ + /* Input Parameters: */ + /* time's interval in milliseconds before the timer expires */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ T_RV_RET dar_start_watchdog_timer(UINT16 timer_expiration_value) { DAR_SEND_TRACE("DAR Watchdog timer",RV_TRACE_LEVEL_DEBUG_LOW); - /* use Watchdog timer set as a general purpose timer */ - /* Calculate the load value thanks to the formula: */ - /* timer_expiration_value * 1000 = Tclk * (DAR_LOAD_TIM+1)*2^(PTV+1)*/ - /* (in Watchdog mode, the value of PTV is fixed to 7) */ + /* use Watchdog timer set as a general purpose timer */ + /* Calculate the load value thanks to the formula: */ + /* timer_expiration_value * 1000 = Tclk * (DAR_LOAD_TIM+1)*2^(PTV+1)*/ + /* (in Watchdog mode, the value of PTV is fixed to 7) */ dar_load_tim = ((timer_expiration_value * 1000)/(1.078*256))-1; #ifndef _WINDOWS @@ -340,26 +334,26 @@ } /* dar_start_watchdog_timer */ - /********************************************************************************/ - /* */ - /* Function Name: dar_reload_watchdog_timer */ - /* */ - /* Purpose: This function is used to maintain the timer in reloading it */ - /* periodically before it expires */ - /* */ - /* Input Parameters: */ - /* None */ - /* */ - /* Output Parameters: */ - /* Validation of the function execution. */ - /* */ - /* Note: */ - /* None. */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_reload_watchdog_timer */ + /* */ + /* Purpose: This function is used to maintain the timer in reloading */ + /* it periodically before it expires. */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ T_RV_RET dar_reload_watchdog_timer() { #ifndef _WINDOWS @@ -389,26 +383,26 @@ } /* dar_reload_watchdog_timer */ - /********************************************************************************/ - /* */ - /* Function Name: dar_stop_watchdog_timer */ - /* */ - /* Purpose: This function stops the timer used as a general purpose timer */ - /* instead of watchdog */ - /* */ - /* Input Parameters: */ - /* None */ - /* */ - /* Output Parameters: */ - /* Validation of the function execution. */ - /* */ - /* Note: */ - /* None. */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_stop_watchdog_timer */ + /* */ + /* Purpose: This function stops the timer used as a general purpose */ + /* timer instead of watchdog. */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ T_RV_RET dar_stop_watchdog_timer() { #ifndef _WINDOWS @@ -428,29 +422,29 @@ } /* dar_stop_watchdog_timer */ - /* **************************************************************************** */ - /* RESET */ - /* **************************************************************************** */ + /* *********************************************************************** */ + /* RESET */ + /* *********************************************************************** */ - /********************************************************************************/ - /* */ - /* Function Name: dar_reset_system */ - /* */ - /* Purpose: This function can be used to reset the system voluntarily */ - /* */ - /* Input Parameters: */ - /* None */ - /* */ - /* Output Parameters: */ - /* Validation of the function execution. */ - /* */ - /* Note: */ - /* None. */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_reset_system */ + /* */ + /* Purpose: This function can be used to reset the system voluntarily. */ + /* */ + /* Input Parameters: */ + /* None */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* Note: */ + /* None. */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ T_RV_RET dar_reset_system(void) { @@ -468,31 +462,31 @@ return(RV_OK); } - /* **************************************************************************** */ - /* DIAGNOSE */ - /* **************************************************************************** */ + /* *********************************************************************** */ + /* DIAGNOSE */ + /* *********************************************************************** */ - /********************************************************************************/ - /* */ - /* Function Name: dar_diagnose_swe_filter */ - /* */ - /* Purpose: This function is called to configure the Diagnose filtering. */ - /* It allows to determine what Software Entity ( dar_use_id ) */ - /* wants to use the Diagnose and allows to indicate the level */ - /* threshold of the diagnose messages. (Warning or Debug) */ - /* */ - /* Input Parameters: */ - /* - the dar use id */ - /* - the dar level */ - /* */ - /* Output Parameters: */ - /* Validation of the function execution. */ - /* */ - /* */ - /* Note: */ - /* None */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_diagnose_swe_filter */ + /* */ + /* Purpose: This function is called to configure the Diagnose filtering.*/ + /* It allows to determine what Software Entity ( dar_use_id ) */ + /* wants to use the Diagnose and allows to indicate the level */ + /* threshold of the diagnose messages. (Warning or Debug) */ + /* */ + /* Input Parameters: */ + /* - the dar use id */ + /* - the dar level */ + /* */ + /* Output Parameters: */ + /* Validation of the function execution. */ + /* */ + /* */ + /* Note: */ + /* None */ + /* */ + /***************************************************************************/ T_RV_RET dar_diagnose_swe_filter ( T_RVM_USE_ID dar_use_id, T_DAR_LEVEL dar_level) @@ -501,7 +495,7 @@ T_RVF_MB_STATUS mb_status = RVF_GREEN; T_DAR_FILTER_START *use_id_p = NULL; - /************************** dar_diagnose_swe_filter function ***************/ + /*********************** dar_diagnose_swe_filter function *************/ if (dar_gbl_var_p == NULL ) { @@ -514,7 +508,7 @@ sizeof (T_DAR_FILTER_START), (T_RVF_BUFFER **) (&use_id_p)); - /* If insufficient resources, then report a memory error and abort. */ + /* If insufficient resources, then report a memory error and abort. */ if (mb_status == RVF_YELLOW) { /* deallocate the memory */ @@ -546,31 +540,31 @@ return (RV_OK); - + } /* dar_diagnose_swe_filter */ - /********************************************************************************/ - /* */ - /* Function Name: dar_diagnose_write */ - /* */ - /* Purpose: This function is called to store diagnose data in RAM buffer */ - /* */ - /* */ - /* Input Parameters: */ - /* Pointer to the message to store */ - /* Data Format, ( the Binary format is not supported) */ - /* Data level, */ - /* Data Use Id, */ - /* */ - /* Output Parameters: */ - /* Validation of the diagnose execution. */ - /* */ - /* */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_diagnose_write */ + /* */ + /* Purpose: This function is called to store diagnose data in RAM */ + /* buffer. */ + /* */ + /* Input Parameters: */ + /* Pointer to the message to store */ + /* Data Format, ( the Binary format is not supported) */ + /* Data level, */ + /* Data Use Id, */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ T_RV_RET dar_diagnose_write( T_DAR_INFO *buffer_p, T_DAR_FORMAT format, T_DAR_LEVEL diagnose_info_level, @@ -594,13 +588,16 @@ & ((dar_use_id)&0xFFFF)) !=0) { /* The Warning messages must be diagnosed */ - dar_send_write_data( buffer_p, format, diagnose_info_level, dar_use_id); + dar_send_write_data( buffer_p, format, diagnose_info_level, + dar_use_id); } else { - /* There is no mask_warning for this use_id in the dar_filter array */ - /* The warning messages can't be diagnosed */ + /* + * There is no mask_warning for this use_id in the dar_filter + * array; the warning messages can't be diagnosed. + */ DAR_TRACE_WARNING("The Warning messages can't be diagnosed"); } @@ -616,13 +613,16 @@ & ((dar_use_id)&0xFFFF)) !=0) { /* The Debug messages must be diagnosed */ - dar_send_write_data( buffer_p, format, diagnose_info_level, dar_use_id); + dar_send_write_data( buffer_p, format, diagnose_info_level, + dar_use_id); } - + else { - /* There is no mask_debug for this use_id in the dar_filter array */ - /* The debug messages can't be diagnosed */ + /* + * There is no mask_debug for this use_id in the dar_filter + * array; the debug messages can't be diagnosed. + */ DAR_TRACE_WARNING("The Debug messages can't be diagnosed"); } break; @@ -631,46 +631,46 @@ default: { /* Unknow level has been received */ - DAR_TRACE_WARNING("A DAR unknow level has been received "); + DAR_TRACE_WARNING("A DAR unknown level has been received"); break; } } /* switch(msg_p->use_msg_parameter.level) */ } /* if (search_group(dar_use_id.group_nb,&index)== RV_OK) */ - + else { /* An unknow group message has been received */ - DAR_TRACE_WARNING("A DAR unknow group level message has been received "); + DAR_TRACE_WARNING("A DAR unknown group level message has been received"); } return (RV_OK); } /* dar_diagnose_write */ - /********************************************************************************/ - /* */ - /* Function Name: dar_diagnose_generate_emergency */ - /* */ - /* Purpose: This function is called to store diagnose data in RAM buffer */ - /* when an emergency has been detected and goes to emergency */ - /* (automatic reset) */ - /* */ - /* */ - /* */ - /* Input Parameters: */ - /* Pointer to the message to store */ - /* Data Format, ( the Binary format is not supported) */ - /* Data Use Id, */ - /* */ - /* Output Parameters: */ - /* Validation of the diagnose execution. */ - /* */ - /* */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + /***************************************************************************/ + /* */ + /* Function Name: dar_diagnose_generate_emergency */ + /* */ + /* Purpose: This function is called to store diagnose data in RAM */ + /* buffer when an emergency has been detected and goes to */ + /* emergency (automatic reset) */ + /* */ + /* */ + /* */ + /* Input Parameters: */ + /* Pointer to the message to store */ + /* Data Format, ( the Binary format is not supported) */ + /* Data Use Id, */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ T_RV_RET dar_diagnose_generate_emergency( T_DAR_INFO *buffer_p, T_DAR_FORMAT format, T_RVM_USE_ID dar_use_id) @@ -678,8 +678,9 @@ if (dar_gbl_var_p != NULL) { /* Process the diagnose emergency */ - dar_process_emergency(buffer_p, format, dar_use_id, DAR_EMERGENCY_RESET|DAR_NEW_ENTRY); - + dar_process_emergency(buffer_p, format, dar_use_id, + DAR_EMERGENCY_RESET|DAR_NEW_ENTRY); + return (RV_OK); } else @@ -689,33 +690,33 @@ } /* dar_diagnose_write */ - - /********************************************************************************/ - /* */ - /* Function Name: dar_diagnose_write_emergency */ - /* */ - /* Purpose: This function is called to store diagnose data in RAM buffer */ - /* when an emergency has been detected. Data is written directly */ - /* compared to dar_diagnode_write where data is sent to DAR */ - /* via messages. Depending on the passed flags a RESET will be */ - /* done. */ - /* */ - /* */ - /* Input Parameters: */ - /* Pointer to the message to store */ - /* Data Format, ( the Binary format is not supported) */ - /* Data Use Id, */ - /* Flags */ - /* */ - /* Output Parameters: */ - /* Validation of the diagnose execution. */ - /* */ - /* */ - /* */ - /* Revision History: */ - /* None. */ - /* */ - /********************************************************************************/ + + /***************************************************************************/ + /* */ + /* Function Name: dar_diagnose_write_emergency */ + /* */ + /* Purpose: This function is called to store diagnose data in RAM */ + /* buffer when an emergency has been detected. Data is */ + /* written directly compared to dar_diagnode_write where data */ + /* is sent to DAR via messages. Depending on the passed flags */ + /* a RESET will be done. */ + /* */ + /* */ + /* Input Parameters: */ + /* Pointer to the message to store */ + /* Data Format, ( the Binary format is not supported) */ + /* Data Use Id, */ + /* Flags */ + /* */ + /* Output Parameters: */ + /* Validation of the diagnose execution. */ + /* */ + /* */ + /* */ + /* Revision History: */ + /* None. */ + /* */ + /***************************************************************************/ T_RV_RET dar_diagnose_write_emergency( T_DAR_INFO *buffer_p, T_DAR_FORMAT format, T_RVM_USE_ID dar_use_id, @@ -741,12 +742,12 @@ /* THE DAR ENTITY IS DISABLED */ /* ************************************************ */ - #include "rv/rv_general.h" - #include "rvm/rvm_gen.h" - #include "rvm/rvm_priorities.h" - #include "rvf/rvf_target.h" - #include "rvf/rvf_i.h" - #include "dar/dar_gen.h" + #include "../../riviera/rv/rv_general.h" + #include "../../riviera/rvm/rvm_gen.h" + #include "../../riviera/rvm/rvm_priorities.h" + #include "../../riviera/rvf/rvf_target.h" + #include "../../riviera/rvf/rvf_i.h" + #include "dar_gen.h" T_RV_RET dar_diagnose_swe_filter ( T_RVM_USE_ID dar_use_id, T_DAR_LEVEL dar_level)