FreeCalypso > hg > freecalypso-sw
changeset 1020:fab048ff04b8
doc/Freerunner-Howto: update for voice calls working with the FR codec
| author | Mychaela Falconia <falcon@ivan.Harhan.ORG> |
|---|---|
| date | Sat, 23 Apr 2016 05:17:15 +0000 |
| parents | 69d6da9ee188 |
| children | 8b52011dc66a |
| files | doc/Freerunner-Howto |
| diffstat | 1 files changed, 3 insertions(+), 11 deletions(-) [+] |
line wrap: on
line diff
--- a/doc/Freerunner-Howto Sat Apr 23 05:03:38 2016 +0000 +++ b/doc/Freerunner-Howto Sat Apr 23 05:17:15 2016 +0000 @@ -46,8 +46,9 @@ 2. You should get a flashImage.bin image built; now you need to flash it into your FR's modem. The serial cable method is highly recommended: the only - thing you'll be able to do with our current non-working firmware is help us - debug it, and the serial cable will be needed for the latter part anyway. + thing you'll be able to do with our current not-fully-functional firmware is + play with it and observe the debug output, and the serial cable will be + needed for the latter part anyway. 3. Run fc-loadtool the same way you would if you were flashing leo2moko; @@ -96,15 +97,6 @@ AT+CFUN=1 -- enable radio and SIM interfaces AT+COPS=0 -- register to the default GSM network -Our fw is currently able to exercise all SIM interface functions (at least the -obvious ones which I've tested), register with a live commercial GSM network -using a legitimate SIM, and send and receive SMS using standard GSM 07.05 AT -commands. Voice calls don't work yet: you can dial a MO call with the ATD -command and you can place a MT call to the device under test from the network -side and then answer it with ATA, these calls connect successfully, but the -voice audio fails to pass through: nothing but noise is heard in the earpiece -speaker. See the Firmware_Status write-up for more information. - To reflash your modem back to stable and working leo2moko aka moko12, execute the following fc-loadtool commands: