| 2013-11-12 |
Michael Spacefalcon |
Our nuc-fw is destined to become gsm-fw, so I went ahead and did the big hg mv
|
| 2013-11-12 |
Michael Spacefalcon |
fw build for pirelli: set the ASIC_CONF register like the original fw does
|
| 2013-11-12 |
Michael Spacefalcon |
k5a3281.init (for GTA0x): set WS=3 for nCS0 like the official firmware does
|
| 2013-11-11 |
Michael Spacefalcon |
pirelli.init: go ahead and switch to 812500 baud automatically
|
| 2013-11-11 |
Michael Spacefalcon |
fc-xram: print one '.' for every 100 S-records
|
| 2013-11-11 |
Michael Spacefalcon |
nuc-fw cleanup: old Nucleus demo (w/o TI fw framework) moved out of the way
|
| 2013-11-11 |
Michael Spacefalcon |
RV bring-up: RVT "system time" heartbeat messages now get printed every 20 s!
|
| 2013-11-04 |
Michael Spacefalcon |
RV bring-up: lack of timer ticks fixed,
|
| 2013-11-03 |
Michael Spacefalcon |
fc-xram: execvp of secondary program implemented
|
| 2013-11-02 |
Michael Spacefalcon |
rvtdump: time-stamped logging implemented
|
| 2013-11-02 |
Michael Spacefalcon |
rvtdump: some restructuring
|
| 2013-11-02 |
Michael Spacefalcon |
nuc-fw: switched from nucdemo to Riviera, got some serial output
|
| 2013-11-01 |
Michael Spacefalcon |
nuc-fw: sans-GSM tick timer and Init_Unmask_IT() implemented
|
| 2013-11-01 |
Michael Spacefalcon |
nuc-fw: final preparations for the big transition
|
| 2013-11-01 |
Michael Spacefalcon |
Riviera should be ready for the first TI fw build attempt
|
| 2013-11-01 |
Michael Spacefalcon |
nuc-fw: more minor preparations for the big transition
|
| 2013-10-31 |
Michael Spacefalcon |
rvtdump: satisfactory handling of output from Pirelli's fw
|
| 2013-10-31 |
Michael Spacefalcon |
rvtdump utility written, compiles
|
| 2013-10-31 |
Michael Spacefalcon |
target-utils command input: don't emit BEL on error conditions
|
| 2013-10-31 |
Michael Spacefalcon |
fc-[ix]ram: tty pass-thru mode made binary-safe
|
| 2013-10-31 |
Michael Spacefalcon |
riviera hooked into nuc-fw build
|
| 2013-10-31 |
Michael Spacefalcon |
RVT compiles
|
| 2013-10-31 |
Michael Spacefalcon |
RVM compiles
|
| 2013-10-31 |
Michael Spacefalcon |
All of RVF compiles
|
| 2013-10-30 |
Michael Spacefalcon |
starting to compile RVF
|
| 2013-10-29 |
Michael Spacefalcon |
checking in Riviera code from the Sotomodem version
|
| 2013-10-28 |
Michael Spacefalcon |
nuc-fw: low-level serial code should be complete
|
| 2013-10-28 |
Michael Spacefalcon |
started integrating TI's serial code
|
| 2013-10-27 |
Michael Spacefalcon |
nuc-fw: Init_Target() reconstructed
|
| 2013-10-24 |
Michael Spacefalcon |
nuc-fw: continuing lowest-level BSP integration
|
| 2013-10-20 |
Michael Spacefalcon |
nuc-fw/bsp: niq32.c compiles
|
| 2013-10-20 |
Michael Spacefalcon |
nuc-fw/bsp: niq32.c and sim.h replaced with new versions
|
| 2013-10-20 |
Michael Spacefalcon |
nuc-fw/bsp: more reconciliation
|
| 2013-10-20 |
Michael Spacefalcon |
nuc-fw/bsp: per-target ARMIO init implemented
|
| 2013-10-19 |
Michael Spacefalcon |
nuc-fw/bsp: beginning of reconciliation with the Leonardo semi-src version
|
| 2013-09-13 |
Michael Spacefalcon |
target-utils/Makefile: make clean: support for subset packaging
|
| 2013-09-13 |
Michael Spacefalcon |
loadtools/README: documentation for loadtools should now be complete
|
| 2013-09-11 |
Michael Spacefalcon |
fc-loadtool program-{m0,srec}: more usable progress indication
|
| 2013-09-03 |
Michael Spacefalcon |
fc-loadtool help implemented
|
| 2013-09-02 |
Michael Spacefalcon |
pirexplore: approaching sanity with the LCD
|
| 2013-09-02 |
Michael Spacefalcon |
target-utils/libmpffs: minor refactoring, read into RAM implemented
|
| 2013-09-02 |
Michael Spacefalcon |
pirexplore FFS: buglet fixed, works now
|
| 2013-09-02 |
Michael Spacefalcon |
pirexplore: FFS find command implemented
|
| 2013-09-01 |
Michael Spacefalcon |
pirexplore: beginning of FFS support
|
| 2013-09-01 |
Michael Spacefalcon |
fc-loadtool: flash program-{m0,srec} implemented
|
| 2013-09-01 |
Michael Spacefalcon |
fc-loadtool dump2srec: decorate the SREC output file with S0 and S7 records
|
| 2013-09-01 |
Michael Spacefalcon |
some README files added
|
| 2013-09-01 |
Michael Spacefalcon |
fc-loadtool: GTA0x flash support
|
| 2013-09-01 |
Michael Spacefalcon |
fc-loadtool flash program-bin: smarter progress indication
|
| 2013-09-01 |
Michael Spacefalcon |
fc-loadtool dump2{bin,srec}: smarter progress indication
|
| 2013-08-31 |
Michael Spacefalcon |
nuc-fw: beginning to integrate TI's BSP code
|
| 2013-08-25 |
Michael Spacefalcon |
nuc-fw config: ld script generation implemented
|
| 2013-08-25 |
Michael Spacefalcon |
nuc-fw config: export_to_*(): catch multiple exports of the same setting
|
| 2013-08-25 |
Michael Spacefalcon |
nuc-fw: cheezy config.sh hand-holding script created
|
| 2013-08-25 |
Michael Spacefalcon |
nuc-fw: configuration mechanism hooked into the top level Makefile
|
| 2013-08-23 |
Michael Spacefalcon |
nuc-fw: beginning of the configuration mechanism
|
| 2013-08-22 |
Michael Spacefalcon |
nuc-fw: fixed .section and .align assembly directives
|
| 2013-08-20 |
Michael Spacefalcon |
loadtools/scripts: hw configuration for GTA02
|
| 2013-08-20 |
Michael Spacefalcon |
loadtools for GTA0x AP: GTA02 modem power-off implemented
|
| 2013-08-20 |
Michael Spacefalcon |
loadtools: support building for GTA0x AP
|
