annotate doc/Loadtools-performance @ 649:141372e0d28f

fc-loadtool module refactoring: tpinterfb.c split out
author Mychaela Falconia <falcon@freecalypso.org>
date Mon, 02 Mar 2020 02:45:35 +0000
parents 8c6e7b7e701c
children e66fafeeb377
Ignore whitespace changes - Everywhere: Within whitespace: At end of lines:
rev   line source
630
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
1 Dumping and programming flash
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
2 =============================
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
3
611
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
4 Here are the expected run times for the flash dump2bin operation of dumping the
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
5 entire flash content of a Calypso GSM device:
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
6
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
7 Dump of 4 MiB flash (e.g., Openmoko GTA01/02 or Mot C139/140) at 115200 baud:
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
8 12m53s
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
9
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
10 The same 4 MiB flash dump at 812500 baud: 1m50s
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
11
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
12 Dump of 8 MiB flash (e.g., Mot C155/156) at 812500 baud: 3m40s
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
13
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
14 Because of the architecture of fc-loadtool and its loadagent back-end, the run
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
15 time of a flash dump operation depends only on the serial baud rate and the
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
16 size of the flash area to be dumped; it should not depend on the USB-serial
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
17 adapter type or any host system properties, as long as the host system and
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
18 serial adapter combination supports the desired baud rate. In contrast, flash
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
19 programming and fc-xram loading operations are quite different in that their
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
20 run times do depend on the host system and USB-serial adapter or other serial
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
21 port hardware - this host system dependency exists because of the way these
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
22 operations are implemented in our architecture.
c847d742ab38 doc/Loadtools-performance: article started
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff changeset
23
615
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
24 Here are some examples of expected flash programming times, all obtained on the
630
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
25 Mother's Slackware 14.2 host system:
615
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
26
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
27 Flashing an Openmoko GTA02 modem (K5A3281CTM flash chip) with a new firmware
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
28 image (2376448 bytes), using a PL2303 USB-serial cable at 115200 baud: 7m35s
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
29
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
30 Flashing the same OM GTA02 modem with the same fw image, using a CP2102
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
31 USB-serial cable at 812500 baud: 1m52s
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
32
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
33 Flashing a Magnetite hybrid fw image (2378084 bytes) into an FCDEV3B board
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
34 (S71PL129N flash chip) via an FT2232D adapter at 812500 baud: 2m11s
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
35
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
36 These times are just for the flash program-bin operation, not counting the
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
37 flash erase which must be done first. Flash erase times are determined
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
38 entirely by physical processes inside the flash chip and are not affected by
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
39 software design or the serial link: for each sector to be erased, fc-loadtool
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
40 issues the sector erase command to the flash chip and then polls the chip for
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
41 operation completion status; the polling is done over the serial link and thus
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
42 may seem very slow, but the extra bit of latency added by the finite polling
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
43 speed is still negligible compared to the time of the actual sector erase
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
44 operation inside the flash chip. In contrast, the execution time of a flash
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
45 program-bin operation is a sum of 3 components:
613
ab4021fb1c66 doc/Loadtools-performance: flash programming added
Mychaela Falconia <falcon@freecalypso.org>
parents: 611
diff changeset
46
ab4021fb1c66 doc/Loadtools-performance: flash programming added
Mychaela Falconia <falcon@freecalypso.org>
parents: 611
diff changeset
47 * The time it takes for the bits to be transferred over the serial link;
ab4021fb1c66 doc/Loadtools-performance: flash programming added
Mychaela Falconia <falcon@freecalypso.org>
parents: 611
diff changeset
48 * The time it takes for the flash programming operation to complete on the
ab4021fb1c66 doc/Loadtools-performance: flash programming added
Mychaela Falconia <falcon@freecalypso.org>
parents: 611
diff changeset
49 target (physics inside the flash chip);
ab4021fb1c66 doc/Loadtools-performance: flash programming added
Mychaela Falconia <falcon@freecalypso.org>
parents: 611
diff changeset
50 * The overhead of command-response exchanges between fc-loadtool and loadagent.
ab4021fb1c66 doc/Loadtools-performance: flash programming added
Mychaela Falconia <falcon@freecalypso.org>
parents: 611
diff changeset
51
630
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
52 Programming flash using program-m0 or program-srec
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
53 ==================================================
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
54
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
55 Prior to fc-host-tools-r12 flash programming via flash program-m0 or
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
56 program-srec commands was much slower than flash program-bin. The reason for
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
57 this performance discrepancy was that the original implementation of these
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
58 commands from 2013 was very straightforward: they operated in one pass, reading
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
59 the S-record image file, and as each individual S-record was read, it was turned
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
60 into an AMFW or INFW command to loadagent. In the case of *.m0 files generated
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
61 by TI's hex470 post-linker, each S-record carries 30 bytes of payload, thus the
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
62 flashing operation proceeded in 30-byte units, incurring the overhead of a
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
63 command-response exchange for every 30 bytes. In contrast, our current flash
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
64 program-bin implementation sends 256 bytes of payload per each AMFW or INFW
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
65 command; this larger unit size decreases the overhead of command-response
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
66 exchanges between fc-loadtool and loadagent.
618
6824c4d55848 doc/Loadtools-performance: program-m0 slowness documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 615
diff changeset
67
630
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
68 Why do we need flash program-m0 and program-srec commands at all, why not
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
69 simply convert all SREC images to straight binary first and then program with
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
70 flash program-bin? The reason is that S-record images can contain multiple
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
71 discontiguous program regions with gaps in between. All of our current
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
72 FreeCalypso firmwares built with TI's TMS470 toolchain contain a few small gaps
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
73 in the fwimage.m0 file, filled with 0xFF bytes when converted to straight binary
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
74 with mokosrec2bin, but TI's own firmwares built for 8 MiB flash configurations
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
75 often had much bigger gaps in them.
618
6824c4d55848 doc/Loadtools-performance: program-m0 slowness documented
Mychaela Falconia <falcon@freecalypso.org>
parents: 615
diff changeset
76
630
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
77 As of fc-host-tools-r12 we finally have a more efficient solution for flashing
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
78 discontiguous SREC images: our new implementation of flash program-m0 and
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
79 program-srec commands begins with a preliminary pass (pure host operation, no
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
80 target interaction) of reading the S-record image file; the payload bits are
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
81 written into a temporary binary file (automatically deleted afterward), while
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
82 the address and length of each discontiguous region are remembered internally.
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
83 Then the actual flash programming operation proceeds just like program-bin,
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
84 reading from the internal binary file and sending 256 bytes of payload at a time
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
85 to loadagent, but using the remembered knowledge of where the discontiguous
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
86 regions lie.
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
87
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
88 XRAM loading via fc-xram
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
89 ========================
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
90
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
91 Our current fc-xram implementation is similar to the old 2013 implementation of
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
92 flash program-m0 and program-srec commands in that fc-xram sends a separate ML
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
93 command to loadagent for each S-record, thus the total XRAM image loading time
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
94 is not only the serial bit transfer time, but also the overhead of command-
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
95 response exchanges between fc-xram and loadagent. The flash programming times
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
96 listed above include flashing an FC Magnetite fw image into an FCDEV3B, which
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
97 took 2m11s; doing an fc-xram load of the same FC Magnetite fw image (built as
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
98 ramimage.srec) into the same FCDEV3B via the same FT2232D adapter at 812500
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
99 baud takes 2m54s.
615
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
100
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
101 Why does XRAM loading take longer than flashing? Shouldn't it be faster because
39b74c39d914 doc/Loadtools-performance: complete for now
Mychaela Falconia <falcon@freecalypso.org>
parents: 613
diff changeset
102 the flash programming step on the target is replaced with a simple memcpy()?
630
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
103 Answer: fc-xram is currently slower than flash program operations because the
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
104 latter send 256 bytes at a time to loadagent, whereas fc-xram sends one
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
105 S-record at a time; the division of the image into S-records is determined by
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
106 the tool that generates the SREC image, but TI's hex470 post-linker generates
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
107 images with 30 bytes of payload per S-record. Having the operation proceed in
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
108 smaller chunks increases the overhead of command-response exchanges and thus
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
109 increases the overall time.
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
110
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
111 Additional complication with FTDI adapters and newer Linux kernel versions
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
112 ==========================================================================
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
113
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
114 If you are using an FTDI adapter and a Linux kernel version newer than early
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
115 2017 (the change was introduced between 4.10 and 4.11), then you have one
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
116 additional complication: a change was made to the ftdi_sio driver in the Linux
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
117 kernel that makes many loadtools operations (basically everything other than
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
118 flash dumps which are entirely target-driven) unbearably slow (much slower than
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
119 the Slackware 14.2 reference times given above) unless you execute a special
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
120 setserial command first. After you plug in your FTDI-based USB-serial cable or
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
121 connect the USB cable between your PC or laptop and your FTDI adapter board,
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
122 causing the corresponding ttyUSBx device to appear, execute the following
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
123 command:
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
124
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
125 setserial /dev/ttyUSBx low_latency
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
126
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
127 (Obviously change ttyUSBx to your actual ttyUSB number.) Execute this
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
128 setserial command before running fc-loadtool or fc-xram, and then hopefully you
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
129 should get performance that is comparable to what I get on classic Slackware.
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
130 I say "hopefully" because I am not able to test it myself - I refuse to run any
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
131 OS that can be categorized as "modern" - but field reports of performance on
8c6e7b7e701c doc/Loadtools-performance: updates for new program-m0 and setserial
Mychaela Falconia <falcon@freecalypso.org>
parents: 618
diff changeset
132 non-Slackware systems running newer Linux kernels (4.11 or later) are welcome.