FreeCalypso > hg > freecalypso-tools
annotate doc/Flash-programming @ 982:1c5b485f10ba
fc-loadtool flash: do AMD reset after PL-J PPB write operations
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 02 Dec 2023 06:04:37 +0000 |
parents | a7496a1e0df7 |
children |
rev | line source |
---|---|
676
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 Our Calypso device flash programming tool fc-loadtool can be used in several |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 different paradigms; this article is an attempt to clarify the many available |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 modes of usage. You should also read the companion article Binary-file-formats |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 for further background. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 Flashing firmware release images |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
7 ================================ |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
8 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
9 In conventional forward engineering environments where you develop or maintain |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 firmware for hardware made by your own company (meaning no reverse eng, no |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
11 "illicit" aftermarket tinkering on hw made by some other company aeons ago), |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
12 you have a firmware build system that produces fw build images (some of which |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
13 may subsequently be blessed as releases), and you have a tool that flashes |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
14 these fw build images into your hardware, operating as efficiently as possible, |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
15 automated as much as possible, requiring minimal user action for the boring |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
16 repetitive task of flashing a new fw image every time you build one. And if |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
17 you become lucky enough to produce your hardware in volume, the same objectives |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
18 of maximal efficiency and automation carry over into the production line |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
19 environment as well. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
20 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
21 In TI's environment the standardized format for firmware build images which are |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
22 then flashable into hardware targets was a variant of Motorola SREC written in |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
23 *.m0 files, a variant which we have named moko-style m0 after its most famous |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
24 user. The special quirk of this particular SREC variant is its peculiar byte |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 order. TI's firmware build system produces a *.m0 S-record image as its final |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
26 build product, and TI's official Calypso flash programming tool (FLUID) takes |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
27 these *.m0 files as its input. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
28 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
29 Since the beginning of FreeCalypso we have had two ways of flashing TI-built |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
30 firmware images into suitable targets (initially OM GTA02 modem, then many |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
31 others including our own FCDEV3B): |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
32 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
33 1) Our fc-loadtool has had a flash program-m0 command from the beginning, |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
34 programming device flash with bits from an m0 file directly and natively. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
35 However, prior to fc-host-tools-r12 this command was poorly supported: it |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
36 ran significantly slower than flash program-bin, had poorer progress |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
37 indication and did not perform CRC-32 verification at the end, which is an |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
38 important integrity check. Also this original flash program-m0 command (as |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
39 opposed to flash e-program-m0 added in fc-host-tools-r13) does not include a |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
40 built-in erase step, thus prior to fc-host-tools-r13 the user had to have |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
41 outside knowledge of how many sectors to erase first with a separate flash |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
42 erase command. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
43 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
44 The new flash e-program-m0 command added in fc-host-tools-r13 is m0 image |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
45 flashing finally done right. It reads in the specified S-record image in |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
46 moko-style m0 format, builds a map of potentially discontiguous flash |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
47 regions into which the image deposits bits, erases the set of flash sectors |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
48 which need to be erased before programming these regions, then programs the |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
49 new image bits into flash, exactly like TI's own FLUID. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
50 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
51 2) The alternative way is to first convert the *.m0 S-record image produced by |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
52 TI's hex470 post-linker tool into straight binary (*.bin) with a FreeCalypso |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
53 tool called mokosrec2bin, then program the binary fw image into flash with |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
54 fc-loadtool command flash program-bin. This method is the one we've been |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
55 using since 2017, and our FC Magnetite firmware build system is now set up |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
56 to produce not only fwimage.m0, but also fwimage.bin (it runs mokosrec2bin), |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
57 and it also generates an fc-loadtool command script (a text file named |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
58 flash-script) with two commands in it: a flash erase command with a |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
59 calculated sector address range and a flash program-bin command to program |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
60 the accompanying fwimage.bin image. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
61 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
62 As of fc-host-tools-r13 both methods work equally well: if you have an official |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
63 FreeCalypso firmware release (containing fwimage.m0, fwimage.bin and |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
64 flash-script files) which you need to flash into a device such as our own |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
65 FCDEV3B or OM GTA02 (but *not* Mot C1xx!), you can execute either |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
66 'exec flash-script' or 'flash e-program-m0 fwimage.m0' at the loadtool> prompt, |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
67 and both ways will produce exactly the same result with equal performance and |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
68 reliability. And if you need a more special operation such as erasing the |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
69 entire flash (factory production lines) or erasing and reprogramming only a |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
70 certain part of the normally affected sector range, that's what custom command |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
71 scripting ability is for. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
72 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
73 For the sake of symmetry, we also have a flash e-program-bin command that is a |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
74 binary image format counterpart to flash e-program-m0: it first erases the |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
75 sectors into which new bits will be programmed, then programs the new bits. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
76 Thus a third equally good way to flash a new FreeCalypso fw release into a |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
77 target such as FCDEV3B or GTA02 is to execute |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
78 'flash e-program-bin 0 fwimage.bin' - but don't *ever* do it on a Mot C1xx |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
79 phone! |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
80 |
677
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
81 Discontiguous m0 fw images with large gaps |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
82 ========================================== |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
83 |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
84 One sometimes-advantage of S-record-based formats over straight binary is that |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
85 they can have discontiguous filled regions with gaps in between them; all m0 fw |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
86 images produced by TI's TCS211 build system have some gaps in them. In our |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
87 current FC Magnetite firmwares these gaps have been reduced to less than 16384 |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
88 bytes in total, reducing the wasted disk space and image transfer time to |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
89 sufficiently insignificant if these m0 images are converted to straight binary |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
90 with mokosrec2bin and then flashed as binary as we've been doing. For |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
91 comparison, in Openmoko's classic mokoN firmwares (almost TI's original version |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
92 of the memory map) the first flash sector of 65536 bytes had only 5072 bytes of |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
93 image payload programmed into it, thus indirect programming via mokosrec2bin |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
94 followed by flash program-bin meant sending just over 60k filler 0xFF bytes to |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
95 be flashed - becomes noticeable at 115200 baud. |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
96 |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
97 But these gaps were even bigger in TI's classic firmwares (and many vendor |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
98 firmwares) built for 8 MiB or 16 MiB flash chips with TI's classic memory map. |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
99 They have two code regions: one region is exactly 4 MiB in size but is placed |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
100 not quite at the beginning, thus spilling past the chip midpoint, and the other |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
101 region starts where the first 4 MiB region ends, going to the end of the flash |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
102 chip or to the beginning of the area reserved for FFS. The way TI's linker |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
103 works results in the first of these two program regions being not quite full |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
104 before bits start getting thrown into the second one, thus the resulting m0 |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
105 image can easily have a gap of a megabyte or more between the two regions. |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
106 TI's own FLUID handles such discontiguous images with no sweat, but our |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
107 fc-loadtool has gained matching capability only as of fc-host-tools-r13 with |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
108 our new e-program-m0 command. And yes, it is smart enough to avoid needlessly |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
109 erasing sectors in the big gap, just like FLUID. |
3a41d69e8104
doc/Flash-programming: added section about discontiguous m0 images
Mychaela Falconia <falcon@freecalypso.org>
parents:
676
diff
changeset
|
110 |
676
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
111 Flash backup and restore |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
112 ======================== |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
113 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
114 A completely different paradigm takes place on alien targets such as Motorola |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
115 C1xx and Pirelli DP-L10, made by alien manufacturers, meaning not FreeCalypso, |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
116 not Openmoko and not TI. The most important flash operation on these alien |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
117 targets is making a flash dump; these dumps can then be used for forensics, |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
118 reverse engineering, or simply as a backup. When we subsequently write to |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
119 flash on these alien targets (after having saved a backup first), we are not |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
120 flashing an m0 fw image or a binary image made from one with mokosrec2bin, |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
121 instead the most common operations are: |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
122 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
123 * Flashing a backup image back into the same device it was originally made |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
124 from (flash restore); |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
125 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
126 * Changing a device from one firmware version to a different one by programming |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
127 its flash with firmware bits that were originally read out from some fw-donor |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
128 unit; |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
129 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
130 * Surgical manipulations such as erasing FFS sectors or rewriting one specific |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
131 part of the flash based on reverse-engineered understanding of its structure. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
132 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
133 This different paradigm leads to a different mode of usage for fc-loadtool: |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
134 instead of needing a maximally-automated operation that flashes a firmware |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
135 release image with as little user thought involvement as possible, our flash |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
136 manipulations need to be of a more manual peek-n-poke manner. We provide a |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
137 flash dump2bin command for making and saving flash dumps first and foremost, |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
138 allowing any part of the flash to be dumped and saved selectively if desired, |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
139 including the second flash bank on the Pirelli DP-L10 and likewise on our own |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
140 FCDEV3B. When it comes to flash write operations, we provide a manual flash |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
141 erase command that allows (and requires) the operator to specify exactly which |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
142 sector range should be erased and a manual flash program-bin command that |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
143 allows any range of 16-bit words to be programmed at any flash address, with |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
144 the bits to be programmed coming from a binary file, either the whole file or |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
145 any specified subrange. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
146 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
147 These manual flash erase and flash program-bin commands give full control to |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
148 the operator, allowing every possible flash manipulation which the hardware |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
149 itself allows, at the expense of requiring the operator to think about which |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
150 flash addresses, offsets and lengths need to be operated on, and either enter |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
151 long commands manually or write a command script. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
152 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
153 Given our historical origins (long before we got to the point of producing our |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
154 own hardware, we started out by exploring the forbidden GSM realm of devices |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
155 made by alien manufacturers who were hostile to our cause), our original flash |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
156 manipulation support in fc-loadtool had been centered around the manual |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
157 peek-n-poke paradigm, with elementary flash erase and flash program-bin commands |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
158 as our main staple, and no thought had been given originally to producing |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
159 functionality that would work like FLUID or like our current flash e-program-m0 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
160 and e-program-bin commands. But all actively maintained software evolves, and |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
161 as our FreeCalypso family of projects has matured over the years, we now offer |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
162 richer functionality covering a wider range of use cases. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
163 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
164 Binary vs. S-records |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
165 ==================== |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
166 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
167 (Please read the companion article Binary-file-formats for background, then |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
168 come back here.) |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
169 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
170 If you are exploring and manipulating the flash content of a GSM device in an |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
171 aftermarket fashion, as opposed to flashing your own fw builds into your own hw |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
172 design produced by your own company like Openmoko did in the late 2000s and |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
173 like we do currently at FreeCalypso HQ, then binary is the generally preferred |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
174 format: you make dumps with flash dump2bin, and when you selectively program |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
175 these images back into devices, you use flash program-bin with the right offsets |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
176 and length, along with appropriate flash erase commands. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
177 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
178 We also have flash dump2srec and flash program-srec commands in fc-loadtool, |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
179 they were implemented back in the founding stage of FreeCalypso in 2013 for the |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
180 sake of completeness and symmetry (it seemed right to support both binary and |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
181 S-record formats), but they never got any practical use: if you are making a |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
182 flash dump, you would normally want to examine it afterward, and any such |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
183 examination almost always needs a straight binary image, not S-records. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
184 Furthermore, our flash program-bin command allows you to selectively program |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
185 just a particular portion of a binary image file into flash, at any arbitrary |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
186 flash address, but we don't have the same flexibility with flash program-srec - |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
187 the latter command is really just a sibling of program-m0 with the opposite |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
188 byte order. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
189 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
190 Thus the short summary is as follows: |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
191 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
192 * If you are flashing an official firmware release image into your device, you |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
193 need to use flash e-program-bin or flash e-program-m0 depending on whether |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
194 the image is provided in *.bin or *.m0 format, or alternatively our older |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
195 flash program-bin or flash program-m0 commands preceded by a separate flash |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
196 erase command with the right sector range, possibly packaged in a supplied |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
197 fc-loadtool command script. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
198 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
199 * If you are restoring a flash dump made with flash dump2bin or performing |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
200 aftermarket flash manipulations on Mot C1xx or Pirelli DP-L10 phones or other |
682
a7496a1e0df7
doc/Flash-programming: typo fix
Mychaela Falconia <falcon@freecalypso.org>
parents:
677
diff
changeset
|
201 such alien devices, you need to use binary-format-based flash manipulation |
676
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
202 commands; the specific commands will depend on exactly what you are seeking |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
203 to do. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
204 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
205 * flash program-srec and e-program-srec commands do not currently have a valid |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
206 use case. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
207 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
208 Special considerations for Compal phones |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
209 ======================================== |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
210 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
211 Motorola C1xx and Sony Ericsson J100 phones made by Compal have brickable flash: |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
212 the right kind of flash-resident bootloader must always be present at the |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
213 beginning of the flash, or else the phone is unrecoverably bricked. We have |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
214 special support in fc-loadtool for minimizing the bricking vulnerability window |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
215 when operating on these phones, but this special support requires user |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
216 cooperation, meaning that you must limit your flash manipulations on these |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
217 phones to a narrower subset: |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
218 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
219 * flash program-m0, program-srec, e-program-m0 and e-program-srec commands are |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
220 not appropriate for these brickable phones - do not use any of these commands |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
221 on these targets. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
222 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
223 * Flash sector 0 must be manipulated only with the special |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
224 flash erase-program-boot command, not any of the regular erase or program |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
225 commands. |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
226 |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
227 * Regular flash erase, flash program-bin and flash e-program-bin commands can |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
228 and should be used for the rest of the flash starting at offset 0x10000 - but |
b6b8307d195b
doc: new articles Binary-file-formats and Flash-programming
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
229 you still need to understand what you are doing. |