FreeCalypso > hg > freecalypso-tools
annotate doc/DUART28-boot-control @ 908:3aca343be11c
CHANGES: add TCH changes since fc-host-tools-r17
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 29 Dec 2022 09:54:09 +0000 |
parents | 78101799417c |
children | 4a153059abbb |
rev | line source |
---|---|
737
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 FreeCalypso DUART28 adapter is a new piece of hardware that became available in |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 2020-09. In principal terms it is a drop-in replacement for the PLDkit FT2232D |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 adapter we've been using previously, but made specifically for working with |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 Calypso targets, rather than generic. However, in addition to providing this |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 drop-in replacement for our previous solution, our DUART28 also provides one |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 new optional feature: target boot control. |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
7 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
8 The target boot control feature of FreeCalypso DUART28 consists of CTL1 and CTL2 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
9 open drain outputs driven by FT2232D Channel B RTS and DTR, respectively, and |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 this feature is optional in that you don't have to connect these signals: if you |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
11 leave them unconnected, they won't do anything, and you can completely ignore |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
12 the existence of this additional feature. However, if you find this new feature |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
13 useful, you can make the necessary wire connections, apply the necessary patch |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
14 to your Linux kernel ftdi_sio driver and reprogram the EEPROM to the DUART28C |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
15 configuration - and then you will gain the ability to control your Calypso |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
16 board's PWON and RESET from your host computer. |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
17 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
18 Hardware connections |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
19 ==================== |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
20 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
21 The official FreeCalypso convention is that DUART28 CTL1 output should be |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
22 connected to PWON on the Calypso board, and CTL2 should be connected to RESET. |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
23 However, these wire connections can be made ONLY if you are going to also apply |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
24 the necessary patch to your Linux kernel ftdi_sio driver and reprogram the |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 EEPROM to the DUART28C configuration - if you connect CTL1 and CTL2 to Calypso |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
26 PWON and RESET without doing the other necessary steps, your setup won't work |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
27 at all: the Calypso+Iota chipset will be held down in test reset and thus |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
28 inoperable whenever you open Channel B ttyUSB device for regular serial |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
29 communication. |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
30 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
31 Linux kernel driver patch |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
32 ========================= |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
33 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
34 FreeCalypso DUART28 adapter is based on the FT2232D chip from FTDI, and all |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
35 FTDI-based USB-serial adapters are supported by the ftdi_sio kernel driver |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
36 under Linux. This driver contains a table of all supported USB IDs, and this |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
37 table needs to be extended (meaning that the driver needs to be patched) |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
38 whenever a new (previously unknown) USB ID needs to be supported. The internal |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
39 architecture of this driver and its USB ID table also allows various quirks to |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
40 be associated with specific USB IDs, meaning that the standard behaviour of the |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
41 driver can be modified in special ways for specific ID-distinguishable USB |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
42 devices. |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
43 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
44 The way in which we have creatively repurposed otherwise unused Channel B RTS |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
45 and DTR outputs into PWON and RESET controls is not compatible with the standard |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
46 unpatched ftdi_sio driver, or rather with the standard unpatched Linux tty |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
47 serial port subsystem in general: the standard Linux tty behaviour (apparently |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
48 stipulated by POSIX) is that whenever any given ttyUSB device is opened, its |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
49 DTR and RTS outputs are immediately asserted, and userspace is not given any |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
50 opportunity to intervene prior to this automatic assertion of DTR & RTS. On our |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
51 non-standard hardware this standard Linux behaviour would cause an unstoppable |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
52 superdeep reset to be triggered whenever the second serial channel is opened for |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
53 regular communication, which is clearly not acceptable. |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
54 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
55 Our solution to this problem consists of a custom USB ID that makes the standard |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
56 unpatched ftdi_sio driver not recognize our DUART28C adapter (DUART28 hardware |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
57 with DUART28C EEPROM config) at all, and a custom patch to the ftdi_sio driver |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
58 that teaches it to recognize our custom USB ID *and* apply a special quirk for |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
59 it. The quirk suppresses automatic assertion of DTR & RTS on ttyUSB device |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
60 open, thereby giving userspace applications full control of these UART outputs |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
61 via TIOCMBIS and TIOCMBIC ioctls. |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
62 |
764
26daa2720bda
doc/DUART28-boot-control: update on the Linux driver patch status
Mychaela Falconia <falcon@freecalypso.org>
parents:
737
diff
changeset
|
63 The first version of our DUART28C support patch was submitted to ftdi_sio |
26daa2720bda
doc/DUART28-boot-control: update on the Linux driver patch status
Mychaela Falconia <falcon@freecalypso.org>
parents:
737
diff
changeset
|
64 maintainer Johan Hovold in 2020-09. Minor refinements were made in late 2020-09 |
766
78101799417c
doc/DUART28-boot-control: update for current patch situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
764
diff
changeset
|
65 into early 2020-10, but then after dragging for several more months, the |
78101799417c
doc/DUART28-boot-control: update for current patch situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
764
diff
changeset
|
66 maintainers essentially rejected the patch on ideological grounds, rather than |
78101799417c
doc/DUART28-boot-control: update for current patch situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
764
diff
changeset
|
67 any code quality issues: |
737
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
68 |
764
26daa2720bda
doc/DUART28-boot-control: update on the Linux driver patch status
Mychaela Falconia <falcon@freecalypso.org>
parents:
737
diff
changeset
|
69 https://lore.kernel.org/linux-serial/X8iuCXYhOBVMGvXv@localhost/T/ |
26daa2720bda
doc/DUART28-boot-control: update on the Linux driver patch status
Mychaela Falconia <falcon@freecalypso.org>
parents:
737
diff
changeset
|
70 |
766
78101799417c
doc/DUART28-boot-control: update for current patch situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
764
diff
changeset
|
71 For the next several decades until these maintainers retire of old age and get |
78101799417c
doc/DUART28-boot-control: update for current patch situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
764
diff
changeset
|
72 replaced by someone more reasonable and cooperative, our only available solution |
78101799417c
doc/DUART28-boot-control: update for current patch situation
Mychaela Falconia <falcon@freecalypso.org>
parents:
764
diff
changeset
|
73 is to apply the necessary patch locally on our own systems. |
764
26daa2720bda
doc/DUART28-boot-control: update on the Linux driver patch status
Mychaela Falconia <falcon@freecalypso.org>
parents:
737
diff
changeset
|
74 |
26daa2720bda
doc/DUART28-boot-control: update on the Linux driver patch status
Mychaela Falconia <falcon@freecalypso.org>
parents:
737
diff
changeset
|
75 For those FreeCalypso DUART28 users who are like the Mother, desiring to use |
26daa2720bda
doc/DUART28-boot-control: update on the Linux driver patch status
Mychaela Falconia <falcon@freecalypso.org>
parents:
737
diff
changeset
|
76 the boot control feature now without waiting indefinitely for Linux kernel |
26daa2720bda
doc/DUART28-boot-control: update on the Linux driver patch status
Mychaela Falconia <falcon@freecalypso.org>
parents:
737
diff
changeset
|
77 maintainers to get their act together, the linux-patch directory in our |
26daa2720bda
doc/DUART28-boot-control: update on the Linux driver patch status
Mychaela Falconia <falcon@freecalypso.org>
parents:
737
diff
changeset
|
78 freecalypso-hwlab Hg repository contains several versions of our DUART28C |
26daa2720bda
doc/DUART28-boot-control: update on the Linux driver patch status
Mychaela Falconia <falcon@freecalypso.org>
parents:
737
diff
changeset
|
79 support patch that are meant to be applied locally by end users. |
737
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
80 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
81 EEPROM configuration |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
82 ==================== |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
83 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
84 In order to make our DUART28 adapter an acceptable replacement for generic "raw" |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
85 FT2232x adapters (or CP2105-based Sysmocom mv-uart) which are supported out of |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
86 the box by standard unpatched ftdi_sio and cp210x drivers, we ship our DUART28 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
87 boards with DUART28S configuration in the EEPROM, rather than DUART28C. The S |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
88 configuration sets the USB ID to FT2232x default of 0x0403:0x6010, which the |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
89 standard unpatched ftdi_sio driver recognizes as a completely vanilla USB to |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
90 dual UART adapter - but CTL outputs must be left unconnected in this |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
91 configuration, as they cannot function correctly with this unpatched driver. |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
92 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
93 If you have applied our DUART28C support patch to your ftdi_sio driver, then |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
94 you can reprogram the EEPROM on your board into the C configuration and start |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
95 using CTL outputs. The necessary EEPROM config files and tools can be found in |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
96 our freecalypso-hwlab Hg repository. |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
97 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
98 Support in FC host tools |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
99 ======================== |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
100 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
101 If you have gone through all of the above, you get the following Calypso target |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
102 boot control capabilities with FC host tools: |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
103 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
104 * If you run any of our loadtools programs (fc-loadtool, fc-iram, fc-xram etc) |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
105 or rvinterf on the ttyUSB device corresponding to DUART28 Channel B, which |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
106 will normally be connected to Calypso IrDA UART, adding a -Prts option will |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
107 make the tool pulse RTS, triggering PWON, or adding a -Pdtr option will make |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
108 the tool pulse DTR, triggering RESET. |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
109 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
110 * Standalone fc-pulse-dtr and fc-pulse-rts utilities are also provided, doing |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
111 the obvious. |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
112 |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
113 Note the -P option: prior to this DUART28C support addition, the string argument |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
114 to the -P option (boot control name) was an arbitrary user-defined short name |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
115 to be looked up in /opt/freecalypso/bootctrl.conf, a user-created configuration |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
116 file directing our tools to run a user-provided external boot control command. |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
117 The new logic is that -Pdtr and -Prts are special reserved names for the |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
118 built-in DUART28C boot control function, whereas any other name will be looked |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
119 up in the configuration file and the associated user-provided external command |
6d97866bad79
first round of documentation for DUART28C boot control addition
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
120 will be executed. |