FreeCalypso > hg > freecalypso-tools
annotate loadtools/loadtool.help @ 505:7bf0d909c87e
fc-loadtool flash ID check: change of reset after the check logic
This change only affects those flash configurations that have ID checks
enabled. The logic for resetting the flash after the ID check has been
changed as follows:
1) If the check fails, we return without attempting to reset the flash.
2) If the check is successful, we reset the flash using the configured
method (could be AMD or Intel or Intel W30) instead of always doing an
AMD flash reset as the original code did.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Mon, 27 May 2019 19:58:01 +0000 |
parents | e3d976e1f814 |
children | 372757bb62e4 |
rev | line source |
---|---|
0
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 This is the help file for fc-loadtool. See lthelp.c for the code |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 that parses and displays it. The parsing code is the only |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 documentation for the format of this help file - if you are going to |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 edit this help text, read the parsing code first. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 === main |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
7 This utility allows you to perform the following operations |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
8 on your Calypso GSM device: |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
9 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 * Peek and poke registers |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
11 * Dump any part of memory |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
12 * Read and program flash |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
13 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
14 See the following help topics for more information: |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
15 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
16 help peekpoke Register peek and poke commands |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
17 help flash Flash operation commands |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
18 help all List of all implemented commands |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
19 help exit Controlling the cleanup on exit |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
20 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
21 === all |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
22 abbr Read an ABB register |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
23 abbw Write an ABB register |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
24 baud Switch the serial comm with loadagent to a different baud rate |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 crc32 Get CRC-32 of a memory area on the target |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
26 dieid Read the Calypso die ID |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
27 dump Dump a target memory region in hex and ASCII |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
28 dump2bin Dump a target memory region to a file in binary format |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
29 dump2srec Dump a target memory region to a file in S-record format |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
30 exec Execute a command script |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
31 exit Exit from loadtool and clean up the target device state |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
32 flash Flash operations |
410
e3d976e1f814
loadtools/loadtool.help: update for FC devices having flash2
Mychaela Falconia <falcon@freecalypso.org>
parents:
228
diff
changeset
|
33 flash2 Operations on the 2nd flash bank (FC and Pirelli devices only) |
0
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
34 quit Alias for exit |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
35 r8 Read an 8-bit register or memory location |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
36 r16 Read a 16-bit register or memory location |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
37 r32 Read a 32-bit register or memory location |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
38 w8 Write an 8-bit register or memory location |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
39 w16 Write a 16-bit register or memory location |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
40 w32 Write a 32-bit register or memory location |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
41 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
42 To get help on any command, type help and the command keyword. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
43 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
44 === abbr |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
45 === abbw |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
46 abbr pg reg Read ABB register <reg> on page <pg> |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
47 abbw pg reg val Write <val> into register <reg> on page <pg> |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
48 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
49 The <pg> and <reg> arguments default to decimal unless prefixed with 0x; |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
50 the <val> argument to abbw is always hexadecimal. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
51 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
52 === baud |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
53 baud Display the current baud rate |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
54 baud <rate> Switch the baud rate to <rate> (number in bps) |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
55 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
56 The supported baud rates are: |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
57 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
58 Standard: 19200, 38400, 57600, 115200 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
59 Calypso special: 203125, 406250, 812500 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
60 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
61 The baud command coordinates the necessary simultaneous switching of the |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
62 baud rate on both the host and the target (loadagent). Loadagent always |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
63 supports all of the listed rates and will switch happily, but in the case |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
64 of the higher non-standard baud rates fc-loadtool has no way of knowing |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
65 ahead of time whether or not the requested baud rate is supported by your |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
66 usb2serial adapter or whatever other serial port hardware and driver |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
67 you are using. If the baud rate switch fails, the communication link with |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
68 the target will be broken and fc-loadtool will exit ungracefully. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
69 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
70 === crc32 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
71 crc32 hex-start hex-len |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
72 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
73 The first argument is the starting target memory address in hex; the second |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
74 argument is the length of the area to CRC, also in hex. The command will be |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
75 sent to loadagent; CRC-32 of the requested range will be computed on the target |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
76 and displayed in hex. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
77 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
78 === dieid |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
79 dieid Display the Calypso die ID |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
80 dieid <filename> Display the Calypso die ID, and also save it in the |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
81 named file |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
82 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
83 The Calypso die ID resides in 4 16-bit registers at target addresses |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
84 0xFFFEF010 through 0xFFFEF016. It is displayed on the terminal and optionally |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
85 saved to a file in this simple form: |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
86 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
87 FFFEF010: xxxx |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
88 FFFEF012: xxxx |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
89 FFFEF014: xxxx |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
90 FFFEF016: xxxx |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
91 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
92 === dump |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
93 dump hex-start hex-len |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
94 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
95 The first argument is the starting target memory address in hex; the second |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
96 argument is the length of the area to dump, also in hex. The dump will be |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
97 displayed on the terminal in hex and ASCII. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
98 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
99 === dump2bin |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
100 === dump2srec |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
101 dump2bin hex-start hex-len outfile |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
102 dump2srec hex-start hex-len outfile |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
103 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
104 The first argument is the starting target memory address in hex; the second |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
105 argument is the length of the area to dump, also in hex; the third argument |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
106 is the name of the output file to be created/written. The dump will be saved |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
107 in binary or S-records as per the chosen command, always in the native byte |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
108 order of the Calypso ARM7 target (little-endian). |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
109 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
110 === exec |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
111 exec <script-file> |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
112 |
228
ccf5edab9d5f
loadtool.help: exec command description updated
Mychaela Falconia <falcon@freecalypso.org>
parents:
54
diff
changeset
|
113 Read and execute commands from the named file. If the execution of a script |
ccf5edab9d5f
loadtool.help: exec command description updated
Mychaela Falconia <falcon@freecalypso.org>
parents:
54
diff
changeset
|
114 command encounters an error, the following commands are not executed, i.e., |
ccf5edab9d5f
loadtool.help: exec command description updated
Mychaela Falconia <falcon@freecalypso.org>
parents:
54
diff
changeset
|
115 stop on first error. |
0
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
116 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
117 === exit |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
118 === quit |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
119 exit Clean up the target in the default manner and exit |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
120 exit bare Exit loadtool without doing anything to the target |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
121 exit iota-off Exit loadtool and command an ABB power-off on the target |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
122 exit jump0 Exit loadtool and command the target to reboot via jump to 0 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
123 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
124 The default method of cleaning up the target device state upon exit is set |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
125 in the hardware parameters file selected with the -h or -H command line |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
126 option; it is the exit-mode setting. On the Pirelli phone the default exit |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
127 mode is jump0: it causes the phone to reboot and enter the "charging boot" |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
128 mode, as the USB cable is connected and VBUS is present. On Compal phones the |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
129 default exit mode is iota-off. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
130 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
131 If your device is a GTA02 and you are running fc-loadtool from inside the phone |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
132 (from the AP), the exit command will power off the modem from the AP. If you |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
133 are talking to GTA02 Calypso from an external host via the headset jack, there |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
134 is nothing that fc-loadtool can currently do to power the modem off (exit is |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
135 the same as exit bare in this case) - power it off yourself from the AP. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
136 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
137 If you do an exit bare without powering the target device off in some other |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
138 way, the device will still be running loadagent, which is probably not what you |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
139 want. However, it is the proper exit mode if you have powered off or reset the |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
140 target device by brute force (yanking the battery). |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
141 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
142 === flash |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
143 === flash2 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
144 The primary end use of fc-loadtool is for reading and writing the NOR flash |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
145 memories of the supported GSM devices. Compal phones and the GTA0x GSM modem |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
146 have only one flash bank (as in chip select), and are manipulated with the |
410
e3d976e1f814
loadtools/loadtool.help: update for FC devices having flash2
Mychaela Falconia <falcon@freecalypso.org>
parents:
228
diff
changeset
|
147 flash command. FreeCalypso devices and the Pirelli DP-L10 phone have two flash |
e3d976e1f814
loadtools/loadtool.help: update for FC devices having flash2
Mychaela Falconia <falcon@freecalypso.org>
parents:
228
diff
changeset
|
148 banks (as in chip selects) of 8 MiB each; they are manipulated with the flash |
e3d976e1f814
loadtools/loadtool.help: update for FC devices having flash2
Mychaela Falconia <falcon@freecalypso.org>
parents:
228
diff
changeset
|
149 and flash2 commands. |
0
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
150 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
151 The following flash operations are available on all target devices: |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
152 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
153 flash blankchk Blank-check a region of flash |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
154 flash dump2bin Dump flash content to a file in binary format |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
155 flash dump2srec Dump flash content to a file in S-record format |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
156 flash erase Erase a region of flash |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
157 flash info Display flash configuration info |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
158 flash program-bin Program flash with a binary file |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
159 flash program-m0 Program flash with an image in TI's *.m0 format |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
160 flash program-srec Program flash with an image in standard S-record format |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
161 flash quickprog Program a few flash words from the command line |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
162 flash reset Reset flash chip to read array mode |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
163 flash sectors Display the list of flash sector addresses and sizes |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
164 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
165 Substitute flash2 instead of flash when operating on the 2nd flash chip select |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
166 of Pirelli-style flash memory configurations. Prepend help before a command to |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
167 get usage information, e.g., help flash program-bin. See help compal for some |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
168 additional info specific to Compal targets. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
169 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
170 === compal |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
171 === compalflash |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
172 === flash:compal |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
173 Compal phones have Intel or Intel-style flash chips; other Calypso targets for |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
174 which loadtool was originally designed have AMD-style flash chips. The author |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
175 of the present software has a personal bias toward AMD-style flash, hence the |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
176 support for Intel-style flash is not as clean. Compal phones also have the |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
177 Calypso boot ROM disabled, and depend on flash-resident boot code instead. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
178 This property makes them brickable. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
179 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
180 The following additional loadtool commands apply only to Compal targets with |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
181 Intel-style flash: |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
182 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
183 flash erase-program-boot Erase and reprogram the boot sector |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
184 flash status Read Intel flash Status Register |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
185 flash unlock Unlock flash sectors |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
186 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
187 === flash:blankchk |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
188 flash[2] blankchk hex-start-offset hex-length |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
189 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
190 Blank-checks an area of flash starting at the specified hex offset (from the |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
191 base address of the flash bank) and extending for the specified hex length. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
192 Reports whether the checked region is blank or not. Flash must be blank (FF in |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
193 all bytes) before it can be programmed. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
194 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
195 === flash:dump2bin |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
196 flash[2] dump2bin outfile [offset [length]] |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
197 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
198 Read device flash content and save it to a file. If only a filename is |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
199 specified, the full flash bank is dumped; one can optionally specify a starting |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
200 offset and an explicit length, both in hex. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
201 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
202 This command is merely a user-friendly front-end to the plain dump2bin command; |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
203 see help dump2bin. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
204 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
205 === flash:dump2srec |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
206 flash[2] dump2srec outfile [offset [length]] |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
207 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
208 Read device flash content and save it to a file. If only a filename is |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
209 specified, the full flash bank is dumped; one can optionally specify a starting |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
210 offset and an explicit length, both in hex. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
211 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
212 This command is merely a user-friendly front-end to the plain dump2srec command; |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
213 see help dump2srec. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
214 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
215 === flash:erase |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
216 flash[2] erase hex-start-offset hex-length |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
217 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
218 Erases an area of flash starting at the specified hex offset (from the base |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
219 address of the flash bank) and extending for the specified hex length. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
220 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
221 Flash memory can only be erased (turning 0 bits back to 1s) in units of |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
222 sectors, as set in stone by the design of the flash chip in use. Loadtool |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
223 knows the sector layout of the flash chip in your device from CFI or from the |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
224 hardware parameters file (you can display it with the flash[2] sectors |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
225 command), and enforces that both arguments to the flash[2] erase command lie |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
226 on sector boundaries. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
227 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
228 === flash:erase-program-boot |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
229 flash erase-program-boot binfile [length] |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
230 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
231 This operation is applicable to Compal targets only. This command erases and |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
232 reprograms flash sector 0 (the boot sector) with minimized vulnerability to |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
233 bricking by loading the new boot code into a scratchpad RAM area on the target, |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
234 then commanding loadagent (running on the target) to erase and reprogram the |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
235 dangerous flash sector without requiring further interaction with loadtool. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
236 (In contrast, loadtool's "regular" flash erase and program operations are |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
237 driven primarily by loadtool, with loadagent providing only low-level |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
238 functions.) |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
239 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
240 The new bits to be programmed are taken from the specified binary file. Byte 0 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
241 of the file goes into byte 0 of the flash and so on, for the specified length. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
242 If no length argument is given, it defaults to the length of the file, which |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
243 must not exceed the length of flash sector 0: 64 KiB on the "basic" Compal |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
244 phones or 8 KiB on C155/156. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
245 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
246 === flash:info |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
247 This command displays summary information about the flash memory configuration |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
248 of the Calypso target device loadtool thinks it's talking to. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
249 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
250 === flash:program-bin |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
251 flash[2] program-bin flash-offset binfile [file-offset [length]] |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
252 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
253 This command programs flash, using a binary file as the data source. One must |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
254 always specify the starting flash offset (from the base address of the flash |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
255 bank), but the starting file offset and length are optional, defaulting to the |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
256 whole file. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
257 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
258 The binary file must be in the native byte order of the Calypso ARM7 processor, |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
259 which is little-endian. Images produced by flash[2] dump2bin are suitable. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
260 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
261 === flash:program-m0 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
262 flash[2] program-m0 image.m0 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
263 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
264 *.m0 is the format that has been used by companies like TI and Closedmoko for |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
265 their proprietary firmware images. It is emitted by TI's hex470 tool, and in |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
266 the proprietary environment it is fed as an input to FLUID. (The latter is |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
267 TI's Flash Loader Utility Independent of Device, and fc-loadtool can be seen as |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
268 an independent reimplementation thereof - although it doesn't have the same |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
269 level of device-independence.) The *.m0 format is actually a variant of |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
270 Motorola's SREC, but with a different byte order: each 16-bit word is |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
271 byte-reversed relative to the native byte order of the ARM7 processor. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
272 (This strange byte order actually makes some sense if one views the image as a |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
273 long array of 16-bit hex values; 16 bits is the width of the flash memory on |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
274 Calypso GSM devices and thus the natural unit size for flash programming.) |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
275 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
276 Because each S-record contains an address, no addresses or offsets need to be |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
277 specified in the flash[2] program-m0 command, only the image file. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
278 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
279 === flash:program-srec |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
280 flash[2] program-srec image.srec |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
281 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
282 This command programs the flash with an image in the standard S-record format, |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
283 in the native little-endian byte order of the Calypso ARM7 processor. It is |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
284 the opposite byte order from that used by TI's *.m0 files - |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
285 see help flash program-m0. Images produced by flash[2] dump2srec are suitable |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
286 for flash[2] program-srec. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
287 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
288 Because each S-record contains an address, no addresses or offsets need to be |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
289 specified in the flash[2] program-srec command, only the image file. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
290 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
291 === flash:quickprog |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
292 flash[2] quickprog hex-offset hex-data-string |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
293 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
294 This command is intended only for developers; it provides raw access to |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
295 loadagent's basic flash write primitive. Read the source code for more |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
296 information. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
297 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
298 === flash:reset |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
299 Intel-style flash memory chips (found in Compal phones) have two "stable" or |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
300 "quiescent" states: reading array data and reading the status register (SR). |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
301 After an erase or program operation the flash chip is "parked" in the Read SR |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
302 state; the flash reset command switches it back to reading array data. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
303 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
304 This command works for AMD-style flash as well (found in Openmoko and Pirelli |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
305 phones), but it is normally not needed, as AMD-style flash chips automatically |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
306 return to the read-array-data state after every erase or program operation. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
307 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
308 === flash:sectors |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
309 This command displays the list of sector offsets and sizes for the flash chip |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
310 in the Calypso target device loadtool thinks it's talking to. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
311 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
312 === flash:status |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
313 This command is only applicable to Intel-style flash as found in Compal phones. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
314 It reads the flash chip's Status Register, which can be used to diagnose errors |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
315 incurred by previous erase or program operations. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
316 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
317 === flash:unlock |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
318 flash unlock hex-start-offset hex-length |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
319 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
320 This command is only applicable to Intel-style flash as found in Compal phones. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
321 These flash chips power up with each sector (erase block) in the "locked" state; |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
322 each sector needs to be unlocked before it can be erased or programmed. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
323 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
324 This command is normally not needed, as the flash erase command unlocks each |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
325 sector before erasing it. However, if you are going to perform program |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
326 operations in some sectors without erasing them, you will need to unlock them |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
327 explicitly first. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
328 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
329 This command operates only on sector boundaries just like flash erase. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
330 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
331 === r8 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
332 === r16 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
333 === r32 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
334 === w8 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
335 === w16 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
336 === w32 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
337 === peekpoke |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
338 The register peek and poke commands are: |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
339 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
340 r8 addr Read an 8-bit register or memory location |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
341 r16 addr Read a 16-bit register or memory location |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
342 r32 addr Read a 32-bit register or memory location |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
343 w8 addr data Write an 8-bit register or memory location |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
344 w16 addr data Write a 16-bit register or memory location |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
345 w32 addr data Write a 32-bit register or memory location |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
346 |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
347 All addresses and data values are in hex. |
e7502631a0f9
initial import from freecalypso-sw rev 1033:5ab737ac3ad7
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
348 |