FreeCalypso > hg > freecalypso-tools
annotate doc/RF_tables @ 779:8196bba46318
simagent: set-spenh test command implemented
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Mar 2021 19:47:06 +0000 |
parents | 817f3b5f019e |
children |
rev | line source |
---|---|
148
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 TI's TCS211 firmware for the Calypso+Iota+Rita chipset maintains a number of |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 tables for RF calibration and configuration. These tables can be saved in the |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 non-volatile flash file system (FFS), as normally required for per-unit RF |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 calibration; tables that are saved in FFS will be automatically read when the |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 firmware boots and whenever it switches between 900+1800 and 850+1900 MHz band |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 pairs. There is also a compiled-in default for each of the tables built into |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
7 the firmware image; these defaults are used whenever a given table is not found |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
8 in FFS. |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
9 |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 The firmware also provides Test Mode commands (accessed via the RVTMUX binary |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
11 packet interface) through which an external host can read and write the in-RAM |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
12 working copies of these RF calibration and configuration tables; the standard |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
13 expected workflow is as follows: |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
14 |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
15 * When the firmware first boots on a freshly manufactured board with a blank |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
16 FFS, the in-RAM working tables are loaded from the compiled-in defaults. |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
17 |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
18 * The factory production test and RF calibration station connects to the |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
19 running firmware via RVTMUX, and as it goes through the requisite calibration |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
20 steps, properly adjusted RF tables are formed in the firmware's working in-RAM |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
21 locations. |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
22 |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
23 * The production test and calibration station sends some special command packets |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
24 (encoded via the MISC_ENABLE opcode) to the firmware; these commands tell the |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 firmware to take the in-RAM RF tables and save them in the non-volatile FFS. |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
26 There are separate me commands for saving different groups of RF tables, |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
27 divided into RF calibration, RF config, Tx calibration, Tx config, |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
28 Rx calibration and Rx config. The tables in the Tx config and Rx config |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
29 groups are never modified in practice, hence they are usually not written |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
30 into FFS and the fw uses the compiled-in versions instead. |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
31 |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
32 * In normal operation the GSM device firmware reads the RF calibration and |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
33 configuration tables that have been written into FFS on the production line |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
34 and subsequently persist for the lifetime of the device. |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
35 |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
36 FreeCalypso tools provide the following support for working with these tables: |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
37 |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
38 * We have defined our own ASCII text-based format in which each of the RF tables |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
39 implemented by TCS211 fw can be represented. This text format is both human- |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
40 and machine-readable. |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
41 |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
42 * Our fc-tmsh utility (the tool that exchanges Test Mode command packets with |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
43 running firmwares) supports rftw and rftr commands for reading and writing |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
44 the fw's in-RAM RF tables via RF_TABLE_WRITE and RF_TABLE_READ command |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
45 packets. Our implementation of the rftw command takes the table data input |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
46 in the form of ASCII text files in our format, and the tables read back from |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
47 the fw via the rftr command can be written out into host files in the same |
309
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
48 format with the save-rf-table command. |
148
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
49 |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
50 * RF tables that have been saved in the non-volatile FFS can be read out |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
51 "in vivo" via fc-fsio or "in vitro" from a raw flash dump via tiffs. They |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
52 are in the firmware's native binary format. Our fc-cal2text utility can be |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
53 used to convert these binary files into our adopted text format for easier |
309
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
54 analysis. The conversion is lossless. |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
55 |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
56 * Any RF table in our ASCII format can be converted back into the corresponding |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
57 native binary with our fc-cal2bin utility. |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
58 |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
59 * Each RF table type for which there is a directly corresponding file in FFS |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
60 can be uploaded into the FFS of a FreeCalypso GSM device directly from our |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
61 ASCII format with the fc-fsio utility's upload-rf-table command. |
148
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
62 |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
63 In the case of two particular RF tables there is a slight difference between |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
64 the way they are stored in FFS and the way they are read and written via Test |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
65 Mode commands: |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
66 |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
67 * The firmware maintains 3 separate tables for il2agc (input level to AGC) |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
68 conversion, to be used in different circumstances. As it happens, the |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
69 compiled-in default is the same for all 3 tables and these tables are never |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
70 changed in practice, but "by the book" they are still 3 separate tables. |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
71 In FFS all 3 tables are concatenated together in a single file |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
72 /gsm/rf/rx/il2agc, but for the rftw and rftr command packet exchanges they |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
73 are 3 separate tables. |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
74 |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
75 * For each supported frequency band there is a table of Tx power ramp-up and |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
76 ramp-down profiles. Each single ramp is 16 bytes, each ramp-up & ramp-down |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
77 pair is 32 bytes, and the firmware allows for 16 of these stored templates. |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
78 The complete table is stored in FFS as a single file of 512 bytes, but it is |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
79 too big for the TM3 protocol. Instead the Test Mode protocol provides |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
80 dedicated TX_TEMPLATE_WRITE (ttw) and TX_TEMPLATE_READ (ttr) commands which |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
81 write or read one 32-byte template at a time. |
0e7a85356130
doc/RF_tables write-up added
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
82 |
309
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
83 Our FreeCalypso ASCII RF table format includes support for a table of type |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
84 tx-ramps; these ramps tables can be written by fc-cal2text, converted back to |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
85 native binary with fc-cal2bin and uploaded with fc-fsio's upload-rf-table |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
86 command, but cannot be uploaded with fc-tmsh's rftw command corresponding to |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
87 the RF_TABLE_WRITE Test Mode command. There is also an ASCII format for a |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
88 single Tx ramp template that can be uploaded with the ttw command; templates |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
89 read back via the ttr command can be saved in the same format with the |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
90 save-tx-ramp command. |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
91 |
158fef5f4b82
doc/RF_tables: updated for the newly implemented more complete support
Mychaela Falconia <falcon@freecalypso.org>
parents:
148
diff
changeset
|
92 In the case of the il2agc table, a FreeCalypso ASCII RF table of type il2agc is |
402
817f3b5f019e
doc/RF_tables: typo fix
Mychaela Falconia <falcon@freecalypso.org>
parents:
309
diff
changeset
|
93 singular as in the Test Mode protocol, not triple as in FFS. |