FreeCalypso > hg > freecalypso-tools
annotate doc/IMEI @ 861:cc621af29b74
CHANGES: document fc-add-ramps
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 18 Dec 2021 21:36:39 +0000 |
parents | 232e36a227dd |
children |
rev | line source |
---|---|
17 | 1 IMEI vs. IMEISV |
2 =============== | |
3 | |
4 There is a subtle distinction between an IMEI and an IMEISV. The first 14 | |
5 digits are the same between the two: the supposedly-world-unique number of a | |
6 given piece of hardware. In a traditional IMEI 15-digit number the significant | |
7 14 digits are followed by a Luhn check digit, whereas an IMEISV has 16 digits: | |
8 the 14 significant digits of the IMEI, *no* Luhn check digit, and two digits of | |
9 "software version". | |
10 | |
11 It is up to device manufacturers and firmware designers to decide whether or | |
12 not to store the Luhn check digit in the GSM device's flash or EEPROM or | |
13 whatever, but it is not sent over the air: instead the IMEISV is sent. It | |
14 appears that the GSM standard authors' intent was that the IMEI part is stored | |
15 immutably in each manufactured device whereas the SV digits are added by the | |
16 running firmware to indicate its version, but the IMEI handling scheme | |
725
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
17 implemented in TI's reference firmware and retained by many TI-based GSM device |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
18 manufacturers (FIC/Openmoko, Foxconn/Pirelli, some module vendors, but notably |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
19 NOT Compal) dispenses away with the IMEI vs. IMEISV distinction. |
17 | 20 |
21 IMEI storage and retrieval in TI's reference firmware | |
22 ===================================================== | |
23 | |
24 When running on the plain Calypso as opposed to Calypso+, TI's TCS211 reference | |
25 firmware supports two ways of storing and retrieving the IMEI: obfuscated and | |
26 unobfuscated. In both schemes the IMEI datum is stored as a file in the | |
27 device's flash file system (FFS), and even though the FFS filename calls it the | |
28 IMEI, the content of this file is really treated as the IMEISV: 16 digits are | |
29 stored, the firmware function responsible for reading the IMEI datum out of FFS | |
30 and passing it on to the rest of the fw is called cl_get_imeisv(), the code in | |
31 this function does not transform the 16 digits in any way, and the downstream | |
32 recipients of these digits treat them as the IMEISV. | |
33 | |
34 The two specific schemes offered by TCS211 fw are as follows: | |
35 | |
36 In the unobfuscated scheme (FF_PROTECTED_IMEI not defined), the so-called IMEI | |
37 but really IMEISV is stored in an FFS file named /pcm/IMEI. The file is 8 bytes | |
38 long, each byte stores two IMEISV digits, and the order of the digits within | |
39 each byte is reversed relative to the natural order: first the least significant | |
40 nibble is used, then the most significant nibble. | |
41 | |
42 In the obfuscated scheme (FF_PROTECTED_IMEI is defined), the so-called IMEI but | |
43 really IMEISV is stored in an FFS file named /gsm/imei.enc. The file is 16 | |
44 bytes long: the first 8 bytes store the 16-digit IMEISV encrypted with DES, | |
45 using the Calypso die ID as the key, and the last 8 bytes store that Calypso die | |
46 ID DES-encrypted with itself. Underneath the obfuscation, the 16 IMEISV digits | |
47 are stored in the 8 bytes in the natural order: first the most significant | |
48 nibble is used, then the least significant nibble. | |
49 | |
50 IMEI storage and retrieval schemes implemented by device manufacturers | |
51 ====================================================================== | |
52 | |
53 Openmoko devices use the unobfuscated IMEI storage method unchanged from TI's | |
54 reference fw: the factory-assigned IMEI is stored in an FFS file named | |
55 /pcm/IMEI, and that is where the original mokoN firmwares look for it. Further | |
56 blurring the distinction between the IMEI and the IMEISV, the 16 digits stored | |
57 in /pcm/IMEI (which the fw treats as the IMEISV) were factory-programmed as the | |
58 15-digit IMEI (with the Luhn check digit) with an appended 0, i.e., the SV | |
725
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
59 digits get set to x0 where x is the Luhn check digit. The same scheme has been |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
60 implemented on some Calypso-based packaged modem modules: Huawei GTM900-B and |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
61 one other module we call Tango. |
17 | 62 |
63 Foxconn, the makers of the Pirelli DP-L10, have used the obfuscated version of | |
64 TI's IMEI handling mechanism instead, with an additional twist: instead of | |
65 storing the 16-byte encrypted datum in /gsm/imei.enc in FFS, they have moved it | |
66 into their own factory data record stored in a non-FFS sector of the flash. | |
67 The content of the 16 digits treated as the IMEISV by the G23M component of the | |
68 fw is the same as Openmoko's: 15-digit IMEI with the Luhn check digit followed | |
69 by a 0 digit. | |
70 | |
725
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
71 Compal, the makers of Motorola C1xx phones, took a very different approach: they |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
72 completely departed from TI's way and implemented IMEI storage and retrieval |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
73 "by the book" instead - their IMEI is stored in the physically immutable OTP |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
74 cells of their Intel-style flash chip's protection register. Once we have made |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
75 this discovery, our fc-loadtool now offers a new flash compal-imei command for |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
76 reading and saving this factory IMEI. This Compal factory OTP record is a true |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
77 15-digit IMEI with the Luhn check digit at the end, no blurring between IMEI and |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
78 IMEISV here. Compal's firmwares add their own SV digits identifying different |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
79 fw versions - their version is truly done "by the book". |
17 | 80 |
81 Changing the IMEI | |
82 ================= | |
83 | |
84 When someone says that they wish to change the IMEI on their phone, they need | |
85 to be a little clearer as to what they really mean, as there are two possible | |
86 interpretations of the just-stated wish: | |
87 | |
88 1. Transmitting a different IMEISV toward the network by running your own | |
89 firmware on the device, | |
90 | |
91 or | |
92 | |
93 2. Changing the IMEI seen by the device's original proprietary firmware. | |
94 | |
95 Interpretation 1 is much easier than interpretation 2: when you are writing your | |
96 own firmware for an "alien" GSM device (hardware designed and made by someone | |
97 other than you), it is much easier to just set your own IMEISV and be done with | |
98 it than to figure out how to retrieve the factory-assigned one. Thus those | |
99 device manufacturers who try to make it more difficult to change their IMEIs | |
100 are actually creating the opposite effect: people will just set their own IMEISV | |
101 when running their own fw on their hw. | |
102 | |
103 Openmoko devices are a rare exception in that if you write your own IMEISV into | |
104 /pcm/IMEI in FFS, your new IMEISV will take effect not only with FreeCalypso | |
105 firmware, but also with the legacy mokoN fw versions, because they all look in | |
106 /pcm/IMEI. The same does NOT hold with Compal/Motorola or Foxconn/Pirelli | |
107 phones, however: if you wish to change their IMEI to be seen by their original | |
108 proprietary firmwares, you are on your own, as we do not currently have any | |
725
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
109 tools for accomplishing such a feat. Furthermore, changing the IMEI seen by |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
110 Compal's proprietary fw would require locating the IMEI reading code in their |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
111 fw and patching that code, as the IMEI record itself in the flash chip's |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
112 protection register is physically immutable. On the Pirelli DP-L10 the feat |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
113 would be simpler, as their factory data block can be rewritten - but we haven't |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
114 produced a tool for fooling Pirelli IMEIs, as there is no current need for such |
232e36a227dd
doc/IMEI: updated for Compal IMEI discovery
Mychaela Falconia <falcon@freecalypso.org>
parents:
17
diff
changeset
|
115 a tool. |
17 | 116 |
117 IMEI handling in FreeCalypso | |
118 ============================ | |
119 | |
120 The FreeCalypso family of projects has adopted the following IMEI storage and | |
121 retrieval scheme both for our own FreeCalypso-made hardware and for FreeCalypso | |
122 firmwares running on alien hardware: all of our firmware versions regardless of | |
123 target will look first in /etc/IMEISV, then in /pcm/IMEI when needing to obtain | |
124 the IMEISV for GSM operation. This is the new unified convention; previously | |
125 we used varying IMEISV retrieval schemes depending on the target and in | |
126 different FC firmware projects. The new unified convention is backward- | |
127 compatible with our previous schemes on every target. | |
128 | |
129 The /etc/IMEISV file is a FreeCalypso invention. The file is 8 bytes long, and | |
130 stores the 16 digits of the IMEISV in the natural order: first the most | |
131 significant nibble is used, then the least significant nibble. This nibble | |
132 order makes the IMEISV number directly readable in a hex dump of the file, and | |
133 the filename /etc/IMEISV makes it clear that the last two digits are the SV and | |
134 are not required to be equal to the Luhn check digit and 0. | |
135 | |
136 Both /etc/IMEISV and /pcm/IMEI can be written with the fc-fsio utility's | |
137 set-imeisv command: | |
138 | |
139 set-imeisv fc XXXXXXXX-YYYYYY-ZZ # write /etc/IMEISV | |
140 set-imeisv pcm XXXXXXXX-YYYYYY-ZZ # write /pcm/IMEI | |
141 | |
142 When working on Openmoko devices, we recommend writing your IMEISV into | |
143 /pcm/IMEI (set-imeisv pcm command) and not creating an /etc/IMEISV file: newer | |
144 FC firmware versions will look in both locations, but older FC fw versions and | |
145 the legacy mokoN ones look only in /pcm/IMEI. On all other targets we recommend | |
146 using the new /etc/IMEISV storage format, i.e., you should use the set-imeisv fc | |
147 variant. |