FreeCalypso > hg > freecalypso-tools
annotate doc/User-phone-tools @ 1014:961efadd530a default tip
fc-shell TCH DL handler: add support for CSD modes
TCH DL capture mechanism in FC Tourmaline firmware has been extended
to support CSD modes in addition to speech - add the necessary support
on the host tools side.
It needs to be noted that this mechanism in its present state does NOT
provide the debug utility value that was sought: as we learned only
after the code was implemented, TI's DSP has a misfeature in that the
buffer we are reading (a_dd_0[]) is zeroed out when the IDS block
is enabled, i.e., we are reading all zeros and not the real DL bits
we were after. But since the code has already been written, we are
keeping it - perhaps we can do some tests with IDS disabled.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Tue, 26 Nov 2024 06:27:43 +0000 |
parents | 8cf7d41f2821 |
children |
rev | line source |
---|---|
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
1 FreeCalypso User Phone Tools are a new software addition to the FreeCalypso |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
2 family. These tools are programs that run on a Unix host computer such as a |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
3 GNU/Linux PC or laptop and communicate with a FreeCalypso phone or modem via |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
4 the standard AT command interface, rather than any of the formerly proprietary |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
5 interfaces specific to TI's internal architecture. The following tools are |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
6 currently available: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
7 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
8 fcup-at Issues an arbitrary AT command given on the command line. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
9 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
10 fcup-settime Issues AT+CCLK command to the target to set its clock to the |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
11 host computer's notion of local time. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
12 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
13 fcup-smdump Retrieves a dump of SMS records (received, sent or stored |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
14 messages) from the FC device's SMS storage (currently SIM |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
15 storage; ME storage may be implemented in the future), |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
16 optionally deleting them from the severely space-limited |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
17 SIM/ME storage afterward. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
18 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
19 fcup-smsend* Tools for sending outgoing SMS from a host computer through a |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
20 FreeCalypso phone or modem and/or writing such outgoing SMS |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
21 into the FC device's SMS storage. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
22 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
23 fcup-smwrite Debug and development tool: writes arbitrary message records |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
24 into the FC device's SMS storage (currently SIM storage) in any |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
25 of the possible 4 states, with arbitrary incoming or outgoing |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
26 SMS PDU content. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
27 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
28 Because these tools communicate with the target via standards-defined AT |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
29 commands, in theory they ought to work with any AT-command-speaking 3GPP phone |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
30 or modem and not just our own FreeCalypso. However, experience has shown that |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
31 in the case of the common proprietary implementations, practice does not match |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
32 theory: when I (Mychaela) tried these same AT commands against a random |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
33 off-the-shelf proprietary modem (Huawei E303 USB stick modem for 3G), the |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
34 following problems were seen: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
35 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
36 * The essential AT+CMGL=4 command for retrieving the full set of SMS records |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
37 from SIM storage in PDU mode appears to be broken: all I got was a hang. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
38 Its text mode counterpart AT+CMGL="ALL" produces incomplete output. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
39 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
40 * Qualcomm/Huawei's implementation of the AT command interface does not allow |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
41 AT+CSCS to be set to "HEX"; our fcup-smdump implementation uses this setting |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
42 so that the phonebook names returned along with SMS PDUs in the +CMGL |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
43 responses can be parsed reliably no matter what weird characters they might |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
44 contain. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
45 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
46 * Setting AT+CSCS to "8859-1" is not supported either; this setting is used by |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
47 our fcup-smsend and fcup-smsendmult tools when sending in text mode. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
48 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
49 * Sending outgoing SMS with fcup-smsend in PDU mode (which does not touch |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
50 AT+CSCS) works in that the message goes out, but the tool complains afterward |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
51 because the echo after the ^Z is different from what our tools expect. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
52 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
53 Because of these quirks, our FC User Phone Tools officially work only with our |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
54 own FreeCalypso phones and modems, and are not expected to work against various |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
55 proprietary implementations. Let us not forget that the broken and buggy nature |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
56 of the common proprietary implementations is the very reason why we need |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
57 FreeCalypso in the first place. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
58 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
59 Target interface options |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
60 ======================== |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
61 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
62 Our fcup-* tools can communicate with the AT-command-speaking target in one of |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
63 two ways: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
64 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
65 * The default is the standard AT command interface over a dedicated UART. As |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
66 of this writing, the only FreeCalypso device that provides a full-featured AT |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
67 command interface of this kind is our FCDEV3B modem, but the ultimate goal of |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
68 the project is to build our own end user phone handset (a Libre Dumbphone) |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
69 that will also provide a full-featured AT command interface on its USB port |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
70 via a built-in CP2102 or FT232R chip. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
71 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
72 * As a dirty hack, one can run FreeCalypso GSM fw on some alien hw targets, |
449
b1864e3f8fb4
CHANGES & doc/User-phone-tools: documented AT-over-RVT long strings
Mychaela Falconia <falcon@freecalypso.org>
parents:
388
diff
changeset
|
73 currently Motorola C1xx and Pirelli DP-L10. In this hacked-up configuration |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
74 there is no dedicated UART available for a standard AT command interface, but |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
75 there is a hack that allows a limited subset of AT commands to be passed over |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
76 the RVTMUX binary packet interface provided by the running FreeCalypso GSM fw. |
450
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
77 Our fcup-* tools can work with this alternate target interface option and |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
78 thereby support these crippled targets. |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
79 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
80 The AT-over-RVTMUX mechanism was originally invented back in 2015 as a |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
81 development aid, and was never intended for production use or to support any |
449
b1864e3f8fb4
CHANGES & doc/User-phone-tools: documented AT-over-RVT long strings
Mychaela Falconia <falcon@freecalypso.org>
parents:
388
diff
changeset
|
82 kind of end user functionality. One of the limitations of its original |
b1864e3f8fb4
CHANGES & doc/User-phone-tools: documented AT-over-RVT long strings
Mychaela Falconia <falcon@freecalypso.org>
parents:
388
diff
changeset
|
83 incarnation was that the strings that are sent to ATI via this interface were |
b1864e3f8fb4
CHANGES & doc/User-phone-tools: documented AT-over-RVT long strings
Mychaela Falconia <falcon@freecalypso.org>
parents:
388
diff
changeset
|
84 limited to 254 characters, whereas sending or writing SMS in hex format |
b1864e3f8fb4
CHANGES & doc/User-phone-tools: documented AT-over-RVT long strings
Mychaela Falconia <falcon@freecalypso.org>
parents:
388
diff
changeset
|
85 requires longer strings. As of early 2019, this limitation has been lifted: |
b1864e3f8fb4
CHANGES & doc/User-phone-tools: documented AT-over-RVT long strings
Mychaela Falconia <falcon@freecalypso.org>
parents:
388
diff
changeset
|
86 our Magnetite and Selenite firmwares from 20190109 onward support an extended |
b1864e3f8fb4
CHANGES & doc/User-phone-tools: documented AT-over-RVT long strings
Mychaela Falconia <falcon@freecalypso.org>
parents:
388
diff
changeset
|
87 version of our AT-over-RVTMUX hack that allows longer strings to be sent in |
b1864e3f8fb4
CHANGES & doc/User-phone-tools: documented AT-over-RVT long strings
Mychaela Falconia <falcon@freecalypso.org>
parents:
388
diff
changeset
|
88 pieces, and the present version of our FC User Phone Tools suite will send the |
b1864e3f8fb4
CHANGES & doc/User-phone-tools: documented AT-over-RVT long strings
Mychaela Falconia <falcon@freecalypso.org>
parents:
388
diff
changeset
|
89 strings it generates via this extended mechanism whenever they exceed the old |
450
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
90 254 character limit. The new mechanism works correctly starting with the |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
91 20190128 firmware release for modem products and the 20190129 fw release for |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
92 Mot C1xx phones, thus when the present version of FC User Phone Tools is used |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
93 to communicate with our current firmwares, both target interface options provide |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
94 equivalent functionality on all supported targets. |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
95 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
96 All fcup-* tools take the following common command line options for selecting |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
97 the AT command target interface: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
98 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
99 -B baud Valid only when -p is also given; selects a different baud rate |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
100 than the default 115200 bps. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
101 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
102 -n Dry run debug mode with no target interface at all: the AT |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
103 commands which would otherwise be sent to the target are simply |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
104 printed on stdout. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
105 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
106 -p ttyport Names the serial port to be used to talk to the target. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
107 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
108 -R Use the AT-over-RVTMUX interface instead of the standard AT |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
109 command interface over a dedicated UART. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
110 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
111 -X program Use the specified external program as the AT target |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
112 communication back-end; read the source code for the details. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
113 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
114 -R and -p options interact as follows: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
115 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
116 Neither -R The standard dedicated AT command interface is used; |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
117 nor -p FC_GSM_DEVICE= environment variable needs to be set |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
118 to point to the serial port. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
119 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
120 -p only The standard dedicated AT command interface is used; |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
121 the serial port is named with the -p option. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
122 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
123 -R only AT-over-RVTMUX interface is used; the fcup-* tool connects |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
124 to an already running rvinterf process. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
125 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
126 -R and -p AT-over-RVTMUX interface is used; a new rvinterf process |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
127 is launched to talk RVTMUX on the specified serial port. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
128 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
129 Retrieving and decoding stored SMS |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
130 ================================== |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
131 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
132 As of this writing, our current FreeCalypso GSM firmware supports only SIM |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
133 storage for SMS, i.e., there is no working mechanism currently for storing SMS |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
134 records (received and sent messages) in the phone's or modem's own flash file |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
135 system. The capacity of this SIM SMS storage is determined by the SIM issuer, |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
136 but it is typically quite limited, on the order of 20 to 30 messages. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
137 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
138 The model adopted for FreeCalypso is that incoming (and possibly saved outgoing) |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
139 messages initially accumulate in the SIM storage as they come in, and then the |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
140 user periodically transfers them to her larger host computer, simultaneously |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
141 deleting them from the SIM storage to reclaim the limited space. The retrieval |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
142 of stored SMS from FreeCalypso GSM devices is accomplished with our fcup-smdump |
450
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
143 utility; like all SMS operations with the current tools+firmware combination, |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
144 this operation works exactly the same whether the FC GSM device offers a full- |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
145 featured AT command interface or only AT over RVTMUX. SMS retrieval is always |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
146 done in PDU mode, and the output from fcup-smdump contains raw SMS PDUs in the |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
147 form of long hex strings. A separate utility called sms-pdu-decode then does |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
148 what its name says. |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
149 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
150 The intended mode of usage is something like this: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
151 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
152 fcup-smdump -d >> long-term-sms-log |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
153 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
154 The -d option to fcup-smdump tells it to delete the retrieved messages from the |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
155 SIM or future ME storage; this option should only be used when the output is |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
156 redirected into some kind of longer-term storage. In the above model the file |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
157 named long-term-sms-log becomes what its name says as new messages retrieved |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
158 from the FC GSM device get added to it; the format will look like this: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
159 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
160 Received message: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
161 XXXXXX... |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
162 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
163 Received message: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
164 XXXXXX... |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
165 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
166 Sent message: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
167 XXXXXX... |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
168 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
169 Stored unsent message: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
170 XXXXXX... |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
171 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
172 Received message: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
173 XXXXXX... |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
174 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
175 Each of the "XXXXXX..." lines will be a long hex string giving an SMS PDU. The |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
176 idea is that the complete record of all received and sent messages should be |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
177 stored on the user's big computer in raw PDU form, rather than decoded, and the |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
178 decoding utility sms-pdu-decode should be invoked by the user (with the message |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
179 log file as input) as needed for reading these messages. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
180 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
181 The message decoding utility sms-pdu-decode does its best to decode and show |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
182 everything without dropping any bits: in addition to the actual decoded message |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
183 characters and the From/To address (the "end user" content of the message), it |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
184 decodes and shows the SC address, the first octet, the MR octet for outgoing |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
185 messages, PID and DCS octets, the SC timestamp or the validity period fields, |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
186 and the UDH bytes if present. However, some bits can still be lost in the |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
187 decoding, which is why it is important to archive messages in the raw PDU form: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
188 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
189 * Padding bits used to round the From/To address and septet-based user data to |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
190 an octet boundary and to round any UDH to a septet boundary are not decoded. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
191 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
192 * If the user data portion of the message is 8-bit or compressed data (per the |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
193 DCS octet), it is shown as a raw hex dump, which is lossless, but if it is |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
194 GSM7 or UCS-2 text (GSM 03.38 character encodings), the characters are |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
195 converted to the user's character set (plain ASCII only by default) for |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
196 display, and some characters may not be displayable. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
197 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
198 Character sets and encodings |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
199 ---------------------------- |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
200 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
201 By default, sms-pdu-decode only emits 7-bit ASCII characters in its output; any |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
202 GSM7 or UCS-2 characters which fall outside of this plain ASCII repertoire are |
805
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
203 converted into backslash escapes. This conservative default behaviour can be |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
204 modified as follows: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
205 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
206 -e option extends the potential output character repertoire from 7-bit ASCII to |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
207 8-bit ISO 8859-1. Any 8859-1 high characters are emitted as single bytes, |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
208 i.e., are NOT encoded in UTF-8 - this option is intended for non-UTF-8 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
209 environments. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
210 |
805
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
211 -u option extends the potential output character repertoire to all of Unicode, |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
212 and changes the output encoding to UTF-8. |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
213 |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
214 Regardless of whether the source message character set is GSM7 or UCS-2 and |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
215 irrespective of -e or -u options, any backslash characters are always escaped |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
216 as \\, and any CR characters are represented as \r. Additional backslash |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
217 escape encodings depend on the source message character set: |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
218 |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
219 * If the source message character set is GSM7, the following additional |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
220 backslash escapes can be emitted: |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
221 |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
222 - In the absence of -u option, the Euro currency symbol is converted to \E; |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
223 |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
224 - Any GSM7 escape characters (0x1B) that aren't part of a valid escape |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
225 sequence for [\]^ or {|}~ or \E are represented as \e; |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
226 |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
227 - Any GSM7 characters that either can't be represented in the output character |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
228 set (ASCII or ISO 8859-1) or are outright invalid per GSM 03.38 are |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
229 represented as \xX, where xX is the original GSM7 code point in 2-digit |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
230 hexadecimal form between 00 and 7F; |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
231 |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
232 - Invalid GSM7 escape sequences are emitted as \e\xX. |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
233 |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
234 * If the source message character set is UCS-2, the following additional |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
235 backslash escapes can be emitted: |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
236 |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
237 - Invalid UCS-2 characters falling onto control character code points are |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
238 emitted as \u00XX; |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
239 |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
240 - UCS-2 characters that can't be represented in ASCII or ISO 8859-1 (when |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
241 running without -u option) are emitted as \uXXXX; |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
242 |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
243 - If UTF-16 surrogate pairs are detected in the input, the encoded high-plane |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
244 Unicode character is reconstructed and emitted as \UXXXXXX in the absence |
a43c5dc251dc
doc/User-phone-tools: new sms-pdu-decode backslash escapes
Mychaela Falconia <falcon@freecalypso.org>
parents:
450
diff
changeset
|
245 of -u option, or as the appropriate UTF-8 byte sequence with -u. |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
246 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
247 -h option causes the user data portion of every message to be displayed as a |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
248 raw hex dump; in the case of GSM7-encoded messages, this hex dump shows the |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
249 unpacked septets. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
250 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
251 Composing and sending outgoing SMS |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
252 ================================== |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
253 |
450
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
254 When used in the default PDU mode (which now works on all targets with our |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
255 current firmware and tools), the primary SMS sending/writing tool fcup-smsend |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
256 offers the following capabilities: |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
257 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
258 * Sending outgoing messages in either GSM7 or UCS-2 encoding; |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
259 * Sending either single or long (concatenated) SMS; |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
260 * Message body input in ASCII, ISO 8859-1 or UTF-8; |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
261 * Message body input either on the command line or on stdin; |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
262 * Any messages sent through this tool (single or concatenated) may be |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
263 multiline, i.e., may contain embedded newlines; |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
264 * Messages sent in GSM7 encoding can contain ASCII characters [\]^ and {|}~ |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
265 - the tool is smart enough to do the necessary escape encoding. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
266 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
267 The default and preferred AT command interface mode for sending/writing SMS is |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
268 PDU mode, which works great when the GSM device provides a proper AT command |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
269 interface. However, when a message of maximum or near-maximum length is being |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
270 submitted to the modem in PDU mode, the hex string that needs to be sent is |
450
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
271 quite long, and at the time when our FC User Phone Tools were first designed |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
272 and written, our AT-over-RVTMUX mechanism could not handle such long strings. |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
273 Because we sought to have at least limited SMS sending and writing support for |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
274 crippled Motorola and Pirelli targets, we also implemented text mode support in |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
275 fcup-smsend and fcup-smsendmult, enabled with the -t option. In this text (-t) |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
276 mode the following restrictions apply: |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
277 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
278 * Only single SMS can be sent, not concatenated; |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
279 * Only GSM7-encoded messages can be sent, not UCS-2; |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
280 * No multiline messages can be sent, i.e., no newlines in the message body; |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
281 * ASCII characters [\]^ and {|}~ won't be sent correctly - GSM 07.05 text mode |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
282 drops them. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
283 |
450
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
284 Now that we have extended our AT-over-RVTMUX mechanism to support longer strings |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
285 and gained full support for PDU mode on all targets, the above -t mode is no |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
286 longer necessary for any use case, as the default PDU mode is a proper superset |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
287 in functionality. However, support for this -t mode has been retained, as |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
288 removing software functionality for no good reason is not the way of FOSS. |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
289 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
290 The invokation syntax is as follows: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
291 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
292 fcup-smsend [options] dest-addr [message] |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
293 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
294 The destination address must be given on the command line; the address digits |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
295 may be optionally followed by a comma and an address type byte, either decimal |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
296 or hexadecimal with 0x prefix. The default address type is 0x91 if the number |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
297 begins with a '+' or 0x81 otherwise. If the message body is given on the |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
298 command line, it must be given as a single argument; if no message body argument |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
299 is given, the message body will be read from stdin. Any trailing newlines are |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
300 stripped before SMS encoding. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
301 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
302 The following options are supported, in addition to the common target interface |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
303 options listed earlier: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
304 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
305 -c Enables concatenated SMS. Concatenated SMS will be sent only |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
306 if the message body exceeds 160 GSM7 or 70 UCS-2 characters, |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
307 otherwise plain SMS will be sent whether -c is given or not - |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
308 but the -c option enables the possibility of sending |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
309 concatenated SMS. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
310 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
311 -C refno Enables concatenated SMS like -c, but also explicitly sets the |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
312 concatenated SMS reference number to be used. The number can |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
313 be either decimal or hexadecimal with 0x prefix. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
314 |
969
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
315 -e Allow message body input to use the same backslash escape |
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
316 sequences that are emitted by sms-pdu-decode, described earlier |
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
317 in this document. Without this option, any backslash characters |
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
318 present in the message body input are interpreted literally; to |
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
319 embed a literal backslash with -e, enter it as \\. |
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
320 |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
321 -q Concatenated SMS quiet mode. If -c is given without -q, the |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
322 tool prints a message on stdout indicating whether the message |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
323 was sent as single or concatenated, and in how many parts. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
324 -q suppresses this additional output. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
325 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
326 -t Use text mode instead of PDU mode on the AT command interface. |
969
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
327 This option is incompatible with -c, with -e and with -U; it |
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
328 also introduces some other restrictions listed above. |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
329 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
330 -u By default, if the message body input contains any 8-bit |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
331 characters, they are interpreted as ISO 8859-1. With -u they |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
332 are interpreted as UTF-8 instead. This option is only relevant |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
333 for GSM7 output encoding, and it is implemented by converting |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
334 the input first from UTF-8 to 8859-1, and then from 8859-1 to |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
335 GSM7 - thus all UTF-8 input characters must fall into the |
969
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
336 8859-1 repertoire, and the only way to send GSM7-encoded |
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
337 messages containing the few Greek letters or the Euro currency |
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
338 symbol allowed by GSM 03.38 encoding is to use backslash escapes |
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
339 with -e. |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
340 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
341 -U Send message in UCS-2 encoding instead of GSM7. Any 8-bit |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
342 characters in the message body input are interpreted as UTF-8, |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
343 and the entire Basic Multilingual Plane of Unicode is allowed. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
344 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
345 -w By default the outgoing message is sent out on the GSM network |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
346 with the AT+CMGS command. With this -w option, the message is |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
347 first written into SIM or future ME SMS storage with AT+CMGW, |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
348 then sent out on the GSM network with AT+CMSS. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
349 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
350 -W Write only, not send: the message is written into storage with |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
351 AT+CMGW and no further action is taken. The modem's +CMGW: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
352 responses with message storage indices are forwarded to stdout. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
353 With this option the destination address argument can be a null |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
354 string or omitted altogether. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
355 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
356 Concatenated SMS reference numbers |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
357 ---------------------------------- |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
358 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
359 Every concatenated SMS transmission needs a reference number, and this number |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
360 needs to increment from one concatenated SMS to the next, to help message |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
361 recipients sort out which is which. If the reference number is not given |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
362 explicitly with -C, fcup-smsend creates (opens with O_RDWR|O_CREAT) a file |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
363 named .concat_sms_refno in the invoking user's $HOME directory; automatically |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
364 incrementing reference numbers are maintained in this file. The initial seed |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
365 is an XOR of all bytes of the current time returned by gettimeofday(2), |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
366 followed by simple linear incrementing; these reference numbers do not need to |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
367 be random in any kind of cryptographically secure sense. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
368 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
369 fcup-smsendmult |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
370 =============== |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
371 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
372 As an alternative to sending concatenated SMS, one can use the fcup-smsendmult |
969
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
373 utility to send several single (no UDH) messages in one batch. This utility |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
374 supports both text and PDU modes (PDU mode is still the preferred default when |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
375 it can be used), and when PDU mode is used, it supports both GSM7 and UCS-2 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
376 output encodings just like fcup-smsend. The messages to be sent are read from |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
377 stdin, and each input line produces a new message. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
378 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
379 The entire batch of messages can be sent to a single recipient, or each message |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
380 in the batch can have its own individual destination address. If the |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
381 destination address is given on the command line, each input line read from |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
382 stdin is just a message body; if no destination address is given on the command |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
383 line, each input line must have the following format: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
384 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
385 <dest addr><white space><message body> |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
386 |
969
8cf7d41f2821
doc/User-phone-tools: document -e addition to fcup-smsend[mult]
Mychaela Falconia <falcon@freecalypso.org>
parents:
805
diff
changeset
|
387 -e, -t, -u, -U, -w and -W command line options are unchanged from fcup-smsend. |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
388 |
450
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
389 This fcup-smsendmult method of sending batched SMS was originally envisioned as |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
390 an alternative to concatenated SMS for crippled hw targets that couldn't support |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
391 sending SMS in PDU mode, but that limitation has now been lifted. Because we |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
392 do not remove already-implemented functionality for no good reason, the tool |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
393 currently remains in search of new potential use cases. |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
394 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
395 fcup-smsendpdu |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
396 ============== |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
397 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
398 This utility sends out SMS PDUs that have been prepared externally; it only |
450
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
399 works in PDU mode - originally it was limited to high-end FreeCalypso hardware |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
400 with a full AT command interface, but now we've got PDU mode working on all |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
401 targets. The PDUs to be sent out are read from stdin, one long hex string PDU |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
402 per line; one can send either a single message or a batch. Because the |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
403 destination address and all content details are encoded in the PDU, the tool |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
404 does not care if the messages are going to the same recipient or to different |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
405 recipients, nor does it care if they constitute a concatenated SMS transmission |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
406 or not. -w and -W options work the same way as in fcup-smsend and |
b5235f8240b9
doc/User-phone-tools: update for SMS PDU mode working on all targets
Mychaela Falconia <falcon@freecalypso.org>
parents:
449
diff
changeset
|
407 fcup-smsendmult. |
388
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
408 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
409 fcup-smwrite |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
410 ============ |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
411 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
412 This utility is a debug and development tool; it differs from fcup-smsendpdu in |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
413 the following ways: |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
414 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
415 * fcup-smsendpdu can send messages out with AT+CMGS, write them into memory |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
416 with AT+CMGW, or do a write-then-send sequence (-w option) with AT+CMGW |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
417 followed by AT+CMSS. fcup-smwrite only issues AT+CMGW commands. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
418 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
419 * fcup-smwrite passes a second argument to AT+CMGW that sets the message state |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
420 to any of the possible 4 values; fcup-smsend* -W put them in the "stored |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
421 unsent" state. |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
422 |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
423 * The input to fcup-smsendpdu is just PDU hex strings; the input to |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
424 fcup-smwrite needs to have the same format as fcup-smdump output in order to |
3d45660f78f0
doc/User-phone-tools article written
Mychaela Falconia <falcon@freecalypso.org>
parents:
diff
changeset
|
425 indicate what state each message should be written in. |