FreeCalypso > hg > freecalypso-tools
comparison loadtools/scripts/compal.config @ 509:49ee210fc4fb
loadtools/scripts/*.config: new flash config
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Tue, 28 May 2019 07:42:39 +0000 |
parents | e7502631a0f9 |
children | b0f9d38bfd9e |
comparison
equal
deleted
inserted
replaced
508:211be4dc6be2 | 509:49ee210fc4fb |
---|---|
1 # This configuration is intended to be applicable to all of C11x, C123, | 1 # This configuration is intended to be applicable to all of C11x, C12x, |
2 # C139 and C140. The "plain" version of compalstage selected below | 2 # C139 and C140. The "plain" version of compalstage selected below |
3 # should work for all C11x/123; it will also work on C139/140 phones | 3 # should work for all C11x/12x; it will also work on C139/140 phones |
4 # that had the simpler boot code flashed into them, as will be used for | 4 # that had the simpler boot code flashed into them, as we do with |
5 # FreeCalypso. When running loadtools with this config on C139/140 | 5 # FreeCalypso fw on these phones. When running loadtools with this config |
6 # phones that still have the "official" fw in them, one will need to | 6 # on C139/140 phones that still have the official fw in them, one will need |
7 # specify -h compal -c 1003 to use the inefficient ~15 KiB version of | 7 # to specify -h compal -c 1004 to use the inefficient ~15 KiB version of |
8 # compalstage. | 8 # compalstage. |
9 | 9 |
10 compal-stage plain | 10 compal-stage plain |
11 | 11 |
12 # Whether we are breaking in through compalstage (as above) or through | 12 # Whether we are breaking in through compalstage (as above) or through |
24 rhea-cntl 0x00 | 24 rhea-cntl 0x00 |
25 | 25 |
26 # The remaining settings are carried out via loadagent commands | 26 # The remaining settings are carried out via loadagent commands |
27 init-script compal.init | 27 init-script compal.init |
28 | 28 |
29 # Flash: use CFI autodetection, 4 MiB max | 29 # Flash can be 2 MiB or 4 MiB, will be autodetected, 4 MiB mapping used |
30 # mapped at 0, see compal.init for the explanation | 30 # mapped at 0, see compal.init for the explanation |
31 flash cfi-4M 0 | 31 flash single-4M 0 |
32 | 32 |
33 boot-reflash-hack 0x820000 0x10000 | 33 boot-reflash-hack 0x820000 0x10000 |
34 | 34 |
35 # Perform a Iota poweroff when we are done | 35 # Perform a Iota poweroff when we are done |
36 exit-mode iota-off | 36 exit-mode iota-off |