FreeCalypso > hg > freecalypso-tools

comparison loadtools/scripts/gta02.config @ 565:4a199ff4b23f

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
loadtools/scripts/gta02.config: use WS=4 for consistency with generic configs which also work on GTA02 and GTA01 targets
author Mychaela Falconia <falcon@freecalypso.org>
date Fri, 31 Jan 2020 06:18:10 +0000
parents 49ee210fc4fb
children 8b4c1811bc1b
comparison
equal deleted inserted replaced
564:42ba9f015d4c 565:4a199ff4b23f
4 # fully upon exit. 4 # fully upon exit.
5 5
6 exit-mode gta02-cutpwr 6 exit-mode gta02-cutpwr
7 7
8 # The following parameters go into the <p command sent to the boot ROM 8 # The following parameters go into the <p command sent to the boot ROM
9 # same values as in pirelli.config, apparently correct for this modem too 9 pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz
10 rhea-cntl 0x00 # good for all Calypso platforms
10 11
11 pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz 12 # Configure MEMIF with loadagent commands
12 rhea-cntl 0x00 # fastest setting, used by OsmocomBB, presumably correct 13 init-script basic-4ws-4mb.init
13
14 # Configure memory timings with loadagent commands
15 init-script k5a3281.init
16 14
17 # Flash access mapping 15 # Flash access mapping
18 flash single-4M 0x03000000 16 flash single-4M 0x03000000