FreeCalypso > hg > freecalypso-tools
comparison loadtools/scripts/gta02.config @ 565:4a199ff4b23f
loadtools/scripts/gta02.config: use WS=4 for consistency
with generic configs which also work on GTA02 and GTA01 targets
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Fri, 31 Jan 2020 06:18:10 +0000 |
parents | 49ee210fc4fb |
children | 8b4c1811bc1b |
comparison
equal
deleted
inserted
replaced
564:42ba9f015d4c | 565:4a199ff4b23f |
---|---|
4 # fully upon exit. | 4 # fully upon exit. |
5 | 5 |
6 exit-mode gta02-cutpwr | 6 exit-mode gta02-cutpwr |
7 | 7 |
8 # The following parameters go into the <p command sent to the boot ROM | 8 # The following parameters go into the <p command sent to the boot ROM |
9 # same values as in pirelli.config, apparently correct for this modem too | 9 pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz |
10 rhea-cntl 0x00 # good for all Calypso platforms | |
10 | 11 |
11 pll-config 4/1 # 26 MHz in, PLL&DSP @ 104 MHz, ARM @ 52 MHz | 12 # Configure MEMIF with loadagent commands |
12 rhea-cntl 0x00 # fastest setting, used by OsmocomBB, presumably correct | 13 init-script basic-4ws-4mb.init |
13 | |
14 # Configure memory timings with loadagent commands | |
15 init-script k5a3281.init | |
16 | 14 |
17 # Flash access mapping | 15 # Flash access mapping |
18 flash single-4M 0x03000000 | 16 flash single-4M 0x03000000 |