FreeCalypso > hg > freecalypso-tools
comparison openmoko/flash-modem.sh @ 691:8bea9cdd8a89
openmoko/flash-modem.sh: added for guidance
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Wed, 11 Mar 2020 01:11:34 +0000 |
| parents | |
| children |
comparison
equal
deleted
inserted
replaced
| 690:0100861ec867 | 691:8bea9cdd8a89 |
|---|---|
| 1 #!/bin/sh | |
| 2 | |
| 3 # This script shows how to flash an Openmoko modem (GTA01/02) with a new | |
| 4 # firmware image (in either *.m0 or *.bin format) in a fully automated manner | |
| 5 # using the new batch mode of fc-loadtool, running from inside the phone. | |
| 6 # This script should be used as a starting point by anyone who may be putting | |
| 7 # together an automated firmware update mechanism similar to OM's uSD card | |
| 8 # automated flasher. | |
| 9 # | |
| 10 # The flashing commands used here are correct ONLY for Openmoko and similar | |
| 11 # modems, _NOT_ for Motorola C1xx phones!!! If you use these commands on a | |
| 12 # Mot C1xx phone, you will unrecoverably brick it! | |
| 13 | |
| 14 if [ $# != 1 ] | |
| 15 then | |
| 16 echo "usage: $0 firmware-image-file" 1>&2 | |
| 17 exit 1 | |
| 18 fi | |
| 19 | |
| 20 case "$1" in | |
| 21 *.bin) | |
| 22 BATCH_CMD="flash e-program-bin 0 $1" | |
| 23 ;; | |
| 24 *.m0) | |
| 25 BATCH_CMD="flash e-program-m0 $1" | |
| 26 ;; | |
| 27 *) | |
| 28 echo "error: format of $1 not recognized" 1>&2 | |
| 29 exit 1 | |
| 30 esac | |
| 31 | |
| 32 /opt/freecalypso/bin/fc-loadtool -h fic -Plm -t1300 /dev/ttySAC0 $BATCH_CMD |